Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

The Energy Arch – “De Energieboog” in Tienen, Belgium by AST77 architects and engineers b.vba

 
July 11th, 2014 by Sumit Singhal

Article source: AST77 architects and engineers b.vba

As a spin-off of IMEC, Photovoltech nv. became one of the most important European producer of multicrystal- line silicon solar cells. Photovoltech was founded in 2001 and has three major shareholders namely Total, GDF Suez and IMEC.

After the first years of investments in the solar cells development and an industrial expansion, the company decided in 2007 to install, on their own business estate, the first electrical production photovoltaic unit. The challenge that was given to the design team, was to create a construction for this photovoltaic production unit on the same innovative manner such as Photovoltech does with the production of their own solar cells.

Image Courtesy © Marc van Heel, Peter Van Impe

Image Courtesy © Marc van Heel, Peter Van Impe

  • Architects: AST77 architects and engineers b.vba
  • Project: The Energy Arch – “De Energieboog”
  • Location: Tienen, Belgium
  • Photography: Marc van Heel, Peter Van Impe
  • Name client: Photovoltech nv
  • Construction Year: 2007 – 2008
  • Building cost: 600.000,00 €
  • Phase: Built
  • Materials: steel frame
  • Name engineer: arch.- ing. Peter Van Impe,  ir. arch. Jan Feyaerts
  • Name safety coordinator: arch. – ing. Koen Laurijssens

Image Courtesy © Marc van Heel, Peter Van Impe

Image Courtesy © Marc van Heel, Peter Van Impe

The main target in the design was to anticipate carefully with the orientation and geography, the existing buildings and the planned developments of the company in the future. Taken into account these prior conditions the architectural construction should also to be considered as a landmark of new technology development of solar energy in the region of Tienen – Belgium.

Image Courtesy © Marc van Heel, Peter Van Impe

Image Courtesy © Marc van Heel, Peter Van Impe

Concept of the Arch

After a careful engineering of wind loads, soil characteristics and finally the possibility of shadow impact from surrounding buildings or from the panels itself. The choice was made to use a segment of an ellipse, to support the photovoltaic panels. The idea of “The Energy Arch” was born.

Image Courtesy © Marc van Heel, Peter Van Impe

Image Courtesy © Marc van Heel, Peter Van Impe

The design of the arch and the fixation of the PV-panels

The external sphere from the ellipse segment is formed by 5 metallic columns, which are horizontally connected with 21 metallic beams. Every 100 cm a point is determinate on the ellipse segment, from this point a circle, with a diameter of 200 cm, is drawn. From each intersection point of the ellipse segment and the circles, a tangent is drawn and the bisector is calculated. These lines define the position of the horizontal metallic beam and the exact position of the PV-panels. The complete construction is supported by a concrete foundation anchored with 8 concrete piles into the ground.

Image Courtesy © Marc van Heel, Peter Van Impe

Image Courtesy © Marc van Heel, Peter Van Impe

All panels are serial electrical interconnected in 9 loops and are producing a total capacity of 50.000 KWh/year. The front (skin) of the arch is chapped, joint less by 280 panels, each 1 m by 1.5 m with a peak power of 200 Wp. The choice of using a galvanised metallic ellipse construction create a perfect integration with the existing building and gives the impression to have an infinitude transitional skyline between the blue silicon cells and the blue sky.

Image Courtesy © Marc van Heel, Peter Van Impe

Image Courtesy © Marc van Heel, Peter Van Impe

Elliptical construction

Definition, characteristics and calculation of the ellipse

In mathematics an ellipse is the apparent shape of a circle viewed obliquely. An ellipse is a two-dimensional figure which can be defined as the locus of points in a plane such that the sum of the distances from the moving point (red line in the figure) to two fixed points, called foci (f1 and f2 in the figure), remains constant.

Image Courtesy © Marc van Heel, Peter Van Impe

Image Courtesy © Marc van Heel, Peter Van Impe

Design of the Arch of Energy and the orientation of the PV-panels

The tangent is the bisector of the angle formed by the focus-tangency point-focus. The 2 foci are imposed points with which the ellipse can be drawn.

Image Courtesy ©  AST77 architects and engineers b.vba

Image Courtesy © AST77 architects and engineers b.vba

Image Courtesy ©  AST77 architects and engineers b.vba

Image Courtesy © AST77 architects and engineers b.vba

Image Courtesy ©  AST77 architects and engineers b.vba

Image Courtesy © AST77 architects and engineers b.vba

Tags: ,

Category: Factory




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise