COADE CADWorx fieldPipe Featured in Australian Pipeline Magazine
[ Back ]   [ More News ]   [ Home ]
COADE CADWorx fieldPipe Featured in Australian Pipeline Magazine

HOUSTON — (BUSINESS WIRE) — May 7, 2009 COADE announced today that CADWorx fieldPipe, a product that combines the intelligent modeling capabilities of CADWorx Plant with the laser precision of Leica fieldPro from Leica Geosystems, was featured in the April 2009 edition of Australian Pipeliner magazine.

The article describes how Falk PLI’s Engineering and Surveying group used the intelligence and accuracy of the laser technology in CADWorx fieldPipe on a project designing a large number of piping spools for fabrication. By using CADWorx fieldPipe, the article discusses how they saved approximately six to eight hours per spool piece – a full work day – eliminating the added cost and rework. Falk PLI reports that they completed the project in 50 per cent of the time it would have normally taken without this powerful tool.

CADWorx fieldPipe was developed by people familiar with piping design and how designers and engineers work in the field, making it easy to set up and use. The accuracy of the package comes from the laser-based surveying techniques it uses. Because the model is being produced live during the scanning, the designer can check the drawing and be sure that all of the relevant information has been accurately obtained before leaving the job site.

Information on COADE and its products can be found at www.coade.com. A copy of the article reprint is available at http://coade.typepad.com/coadeinsider/2009/04/200904%20-%20CWfieldPipe-AustralianPipeliner.pdf.

About COADE

COADE, Inc. is a provider of software for multiple plant design and engineering disciplines. COADE's aims are that design and engineering should share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. COADE's product line conforms to those goals and includes: CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for pressure vessel and heat exchanger design and analysis; CADWorx Plant Design Suite for intelligent plant design modeling, process schematics and automatic production of plant design deliverables; and TANK for the design and analysis of oil storage tanks. COADE, CAESAR II, CADWorx, PV Elite, CodeCalc and TANK are registered trademarks or trademarks of COADE, Inc. For more information, visit www.coade.com.



Contact:

For COADE, Inc.
Gary Carson 1-713-668-8550
Email Contact
or
COADE, Inc.
Vornel Walker, 1-281-890-4566