Open side-bar Menu
 3DEXPERIENCE Construction
Ingeborg Rocker, PhD
Ingeborg Rocker, PhD
Vice President of 3DEXPERIENCity | Geosphere and member of Dassault Systèmes' Corporate Strategy Team, Rocker is responsible for developing a vision and strategy for modeling and simulating our planet with a particular focus on urban settlements.

Reimagining Urban Planning with 3DEXPERIENCity: New urban morphologies for connected work- and lifestyles

 
June 16th, 2016 by Ingeborg Rocker, PhD

click-to-tweetClick to Tweet: Reimagining Urban Planning w/#3DEXPERIENCity: Urban morphologies for connected work- & lifestyles

3DEXPERIENCity, Wind Simulation for Singapore City, Singapore

3DEXPERIENCity, Wind Simulation for Singapore City, Singapore

Traditional models of urbanism are challenged today by the growing and increasingly diversified population in cities. Urban planners will find they need a new planning model that takes into consideration the needs of hyper-dense cities. They will need to re-think how we imagine, plan, design, analyze, simulate, realize and manage cities in order to better plan for the future. New urban planning tools also are needed to foster better communication among governments, business and citizens.

One solution with the potential to transform urban planning is the 3DEXPERIENCE city map. By creating a data-rich virtual model of the city in all its complexity, and linking it back to actual existing conditions in real-time, we can understand through simulations the potential effects of various systemic changes before implementing them.

click-to-tweetClick to Tweet: #Urbanplanners need a new planning model to consider the needs of hyper-dense #cities

Taking a Holistic Approach to City Planning

The key to this holistic digital map of the processes of life and work in the city is that it is continuously updated. Everyone who has access rights to the model—from city planners to business interests and even citizens—sees the most current data, creating a real-time shared point of reference. Through this data, we can understand the entire lifecycle of the city. You will know which lot is empty, which lot is occupied. You will know which segment of the population lives where. You will see how certain changes might decrease pollution or improve traffic flow. This model can capture everything we possibly could know about a city and gives all players access to this collaborative platform.

Most traditional smart city approaches have focused on technology to address urban challenges by collecting massive amounts of sensor data. But this rather technocratic approach—focused on projects narrow in scope and often siloed in individual agencies and research bodies—left cities and citizens alike with vast amounts of data related to very narrow fields of inquiry. A holistic view of the city’s system of systems, the interrelation between people and city, remained elusive.

What has been lacking in these smart city approaches is the intelligence necessary to capture the city and its processes as a whole and to capture and integrate this knowledge into a holistic, real-time virtual model of the city that dynamically updates. A holistic approach is a key aspect of Dassault Systèmes 3DEXPERIENCity, as is the dynamic data model, which enables real-time collaboration and communication.

Using Dynamic Models to Recreate Cities

Think of a city with many players working together: urban planners, urban designers, engineers, architects, landscape architects, developers and many more. Imagine building an extension of a city. One that does not consume more energy than it creates. One with a minimum carbon footprint. One that is hyper dense and yet offers great life-work experiences to all its inhabitants. Different collaborators involved in the planning process of this city interactively explore various design various, and run analytics and simulations to find a design solution with the maximum spatial quality and functional operability.

The dynamic data model keeps track of each version, checks continually for incongruences as different people optimize the city design, and gives warning if the design version does not comply with existing building codes. Once all parties agree on a design version, it will be finalized and its realization is developed, analyzed, simulated and optimized in the virtual model. Every step of the construction process can be explored virtually before it actually will take place in reality. Once the city extension is built, the dynamic model can serve to manage the city. Essentially, the entire lifecycle of a city can be captured this way.

It is here that a 3DEXPERIENCity dynamic data model becomes critical in coordinating the imagination, planning, design, analysis, simulation, realization and management of the city—involving city officials, businesses and citizens alike.

The Interactive New Model for Urban Planning

The 3DEXPERIENCity is the virtual double of the real existing city, capturing changes as they occur over time. The continuous feedback between the virtual dynamic city model and the real city ensures that both represent each other. It maps the entire city lifecycle, exceeding by far the smart city approach, which typically focuses on one topic at a time.

click-to-tweetClick to Tweet: #3DEXPERIENCity maps the city lifecycle, exceeding typical single-topic #smartcity approach

Dassault Systèmes is currently developing an advanced 3DEXPERIENCity project called Virtual Singapore. Singapore is no larger than 278 square miles, and consists of a main island and 62 islets. Land is scarce in this densely urbanized environment. Because Singapore is running out of space for expansion, lacks natural resources, and is facing both a tremendous population growth and change in demography (aging population and multicultural diversity), the country launched a Smart Nation program in late 2014.

Within the framework of this initiative, Dassault Systèmes and Singapore work closely together on Virtual Singapore. It’s an extensive effort to collect data of the city-state’s daily activities and to reflect them in a 3DEXPERIENCity that actively involves city agencies, businesses and citizens alike. Virtual Singapore is the virtual double of real Singapore in the sense that the project’s online platform gives insight into the country’s real-time functioning, and the government shares data with the private sector and the public. The program is designed to improve government services through technology, better connect its citizens, and encourage private-sector innovations.

The 3DEXPERIENCity for Singapore also enables the city to envision and plan future city extensions and densifications in a significant way. The centerpiece of Singapore’s effort is a dynamic data model that will store building’s exact dimensions, window placement, types of construction materials, etc. Virtual Singapore’s options for direct application and experiences seem unlimited.

With the city project, Dassault Systèmes leverages all of its diverse capabilities, including authoring, analytics and simulation capabilities. City planning based on a dynamic data model will be much more sophisticated than ever before.

click-to-tweetClick to Tweet: Reimagining Urban Planning w/#3DEXPERIENCity: Urban morphologies for connected work- & lifestyles

Related Resources

Collaborative, Industrialized Construction

Related posts:

Categories: 3D, AEC, BIM, Civil Design, Collaboration, Dassault Systèmes, Infrastructure, Technologies

Leave a Reply

Your email address will not be published. Required fields are marked *


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy