Open side-bar Menu
 3DEXPERIENCE Construction
Akio Moriwaki
Akio Moriwaki
As head of global marketing for the AEC Industry at Dassault Systèmes, Mr. Moriwaki launches and promotes groundbreaking Industry Solution Experiences including "Optimized Construction," "Façade Design for Fabrication," and "Civil Design for Fabrication." He is a member of buildingSMART.

It’s Time to Provide More Than Design Intent for Architectural Projects

 
December 8th, 2016 by Akio Moriwaki

No car manufacturer in business would create an engine bay by interpreting a representative 2D drawing—yet it is still acceptable for AEC professionals to work that way.

click-to-tweetClick to Tweet: No car manufacturer would build from
a representative 2D drawing. Why should #AEC?

Today’s complex buildings should no longer rely on fragmented communication through 2D drawings or pdfs, said Robert Beson of AR-MA (Architectural Research – Material Applications Pty Ltd.), in a recent presentation at the 3DEXPERIENCE Forum Asia Pacific South 2016.

Beson suggested that architects today have a responsibility to provide more than just design intent. When relying on 2D drawings, too much is left up to interpretation.

click-to-tweetClick to Tweet: Architects have a responsibility
to provide more than just design intent

“It’s necessary to fully engage with the methods of construction, of manufacturing, assembly, logistics and installation,” Beson says. “We need to understand and engage our supply chain from concept through design.”

Adapting to New Processes

Moving to a collaborative platform based on parts and assemblies makes sense, but requires new skillsets from designers.

Today, every project AR-MA designs is comprehensively modeled in 3D.

Every project uses 3D laser point cloud scanning to verify work as it’s built onsite.

Every project uses 3D laser point cloud scanning to verify work as it’s built onsite.

The shift requires architects to interact in new ways with fabrication and construction professionals.

click-to-tweetClick to Tweet: Architects must interact in new
ways with fabrication & construction pros

Take connection brackets, for example. By combining 3D scanning and a just-in-time fabrication pipeline, it’s no longer necessary to design complicated 3-way adjustable brackets. The team can design simple laser cut plates, each of which are slightly different and ultimately improve the tolerances onsite.

The need for 2D drawings can be fully removed by laser cutting or engraving directions for assembly into the materials themselves.

To provide these fabrication-ready solutions, every member of the team at AR-MA writes code.

Every AR-MA team member writes code in order to directly send information to fabrication machinery.

Every AR-MA team member writes code in order to directly send information to fabrication machinery.

“It’s not enough just to model, and put together assemblies and parts, and think through the building process,” Beson says. “It’s crucial to engage with the means of production and be able to communicate with them. Often that means writing code and sending G-codes directly to the CNC machines.”

Comprehensive Modeling for Wynyard Walk’s Unique Components

For Wynyard Walk, a pedestrian walkway recently completed in Sydney, AR-MA was contracted to manage and execute detail design of the stainless cladding. The team had to deliver a fabrication-ready package of over 3,000 perforated stainless panels and lights, more than 50% of which were entirely unique.

Beson notes that it would not have been possible to work from 2D drawings of the mostly unique 3,000 perforated stainless steel panels at the Wynyard Walk pedestrian walkway.

Beson notes that it would not have been possible to work from 2D drawings of the mostly unique 3,000 perforated stainless steel panels at the Wynyard Walk pedestrian walkway.

The designers wanted a parametric model that was flexible enough to respond to ongoing design challenges.

The model had to accommodate an as-built primary structure, a glass reinforced concrete wall cladding, interfaces with the ceiling, and ongoing changes in the panel layout and perforations due to modifications in the façade mullions and setouts.

The contractor found the Façade Design for Fabrication powered by 3DEXPERIENCE platform best fit its needs.

Its integration of design and engineering, part and assembly paradigm, and scalability, among other features, allowed the team to produce a highly detailed and accurate 3D model of the entire project scope.

The integration of design, engineering and fabrication information made the 3DEXPERIENCE a strong solution for this project.

The integration of design, engineering and fabrication information made the 3DEXPERIENCE a strong solution for this project.

Not only did the comprehensive model prevent problems before they arose, but it allowed designers to minimize the number of part drawings by providing fabrication-ready geometry that was sent directly to the fabricator.

This saved time in the office and factory, and removed any error from misinterpretation of the 2D drawings.

For example, the tremendous time crunch made it necessary to release all fabrication information in batches. Façade Design for Fabrication helped the team to coordinate and track those batch releases, as well as any revisions.

Technical Support of Creativity

Beson pointed out that architecture has long been considered a creative endeavor, but what unifies the team at AR-MA is a belief that architects must unite creativity with technical ability.

“Both are necessary to produce the types of innovative and formative buildings our cities require today,” he says.

click-to-tweetClick to Tweet: “It’s Time to Provide More Than
Design Intent for Architectural Projects”

Related Resources

Related posts:

Categories: 3D, AEC, Dassault Systèmes, Façade Design, Technologies

Leave a Reply

Your email address will not be published. Required fields are marked *


*

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon
Graphisoft ARCHICAD  Download a 30-Day FREE trial
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy