Open side-bar Menu
 3DEXPERIENCE Construction

Archive for the ‘AEC’ Category

Simulation Helps Save the World’s Architectural Heritage

Thursday, October 20th, 2016


click-to-tweetClick to Tweet: Simulation Helps Save the World’s
#Architectural Heritage | @Uni_hassan1 @3DS_SIMULIA

The urge to become an engineer hits many people early on in life. Dr. Hicham Fihri-Fassi first felt the call as a young high school student. “I’ve always liked to innovate, and engineering enabled me to do just that,” he says.

Dr. Fassi has since taken those teenage ambitions and made an impressive career of them—today he serves as professor of mechanical engineering at Morocco’s University Hassan First, and is a member of the Faculty of Sciences and Technologies in Settat (FSTS).

Dr Fassi and students

Dr. Fassi with some of his engineering students.

True to his drive for innovation, he’s also responsible for establishing a new research and innovation center at the university, pulling together interested experts from various industrial companies to promote the use of mechanical simulation and other engineering tools, informing and educating his students in the process.

click-to-tweetClick to Tweet: The team at @Uni_hassan1 Morocco
uses simulation to restore heritage buildings

Dr. Fassi is also very focused on the wealth of architectural and archaeological sites in the surrounding area, and has become a strong advocate of preserving them. One of the tools he uses for this work is Abaqus FEA software from SIMULIA, the Dassault Systèmes brand for realistic simulation.

Read the full case study on how University Hassan First restored ancient structures using simulation.

Dr. Fassi and fellow researchers at University Hassan First were faced with compatibility problems when replacing centuries old masonry with modern construction block and mortar while restoring heritage buildings.

Fortunately, realistic simulation helped the university identify internal compressive stresses between dissimilar materials.

The masonry on the left was repointed with compatible mortar, the one on the right with mortar of greater rigidity. Note the stress lines extending into the structure—these will eventually crack or even crush the legacy material, leading to structural failure of an important artifact.

The masonry on the left was repointed with compatible mortar, the one on the right with mortar of greater rigidity. Note the stress lines extending into the structure—these will eventually crack or even crush the legacy material, leading to structural failure of an important artifact.

Restoration workers were able to fine-tune repair materials in advance, match the physical properties of legacy materials and avoid potential damage to important architectural structures.

click-to-tweetClick to Tweet: You only have 1 shot to replace ancient
masonry w/modern materials for preservation.

CASE STUDY: Discover how researchers at University Hassan First in Morocco study and preserve the interface between mortared blocks in ancient buildings.

Related Resources

Collaborative, Industrialized Construction – Industry Solution Experiences from Dassault Systèmes

SIMULIA for realistic AEC simulation

Originally published on

The Underestimated Role of Simulation in Architecture, Engineering and Construction

Thursday, October 6th, 2016

click-to-tweetClick to Tweet: The Underestimated
Role of Simulation in #AEC

Have you heard of hyper-loops, undersea hotels, and made-to-order 3D-printed buildings? These were just concepts a few years ago, but are reality now.


These structures need to be designed for either transporting people through natural surroundings, protecting them from natural surroundings, or allowing them to interact with natural surroundings.

The commonalities that underlay these structures consist of intricate linkages between product, nature, and life.

In fact, the original charter of the Institution of Civil Engineers describes the civil engineering profession as “the art of directing the great sources of power in nature for the use and convenience of man”, and herein underlies the role of product, nature and life.

Applauding XtreeE in leading 3D printing revolution

Thursday, September 29th, 2016

click-to-tweetClick to Tweet: Applauding @XtreeE in
leading a #3dprinting revolution in #AEC

Even as digital technology is transforming AEC processes, emerging digital platforms stand poised to transform construction products themselves.

Paris-based XtreeE is seeking to lead an industrial revolution in construction, civil and mechanical engineering by using 3D printing for large-scale architectural applications.

Through integrated consulting, manufacturing and technology, XtreeE provides education on how to use additive construction in the construction industry, while also developing end-user solutions and the technology needed to fabricate products.

Watch this 360-degree video to experience the process of designing and 3D printing a concrete structure:

(Tip: Use the directional controls to pan around the room as the video plays.)

How Human Task Simulation Can Identify AEC Safety Risks

Thursday, September 22nd, 2016

click-to-tweetClick to Tweet: How Human Task Simulation
Can Identify #AEC Safety Risks

human task simulation

Injury from musculoskeletal disorders (MSDs)—caused by lifting heavy items, performing tasks repetitively, working in awkward body postures, etc.—plagues many industries. In fact, the Bureau of Labor Statistics reports that in 2013, 33 percent of all worker injury and illness cases were the result of MSDs.

How Virtual Reality Will Dramatically Redefine Architecture

Thursday, September 8th, 2016

click-to-tweetClick to Tweet: How #VR Will
Dramatically Redefine #Architecture

Guest post by Quartz creative services; originally published on the 3D Perspectives blog

As we construct future buildings, we will start to see more mingling between architecture and virtual reality.

Imagine you’re a hotelier. Your newest property—let’s call it a high-end resort in the south of France—has gone into construction, but is not yet fully designed. Your firm is based in New York. The old way of designing the property would have involved several transatlantic flights and PDFs sent between you, the architecture firm, your marketing team, and any other stakeholders. Choosing the layout of the hotel rooms, making furniture selections, even just picking out materials and a color scheme, “can be a long and expensive process,” says Benoît Pagotto, a co-founder of IVR Nation.

Moving to Modular Buildings? Better Know Your Fabricators’ Limitations

Thursday, September 1st, 2016

click-to-tweetClick to Tweet: Moving to #Modular Buildings?
Better Know Your Fabricators’ Limitations

Building owners, designers and contractors are increasingly realizing the benefits of modular prefabrication.

This trend transforming the way construction components are delivered is helping speed projects to market and leading to higher quality buildings.

This switch from stick-built construction to the assembly of manufactured components also makes the fabricator’s role more important than ever. Yet every manufacturer faces limitations that can impact their capabilities in delivering the optimum system to the jobsite.

When designers factor in manufacturer limitations, they can better select partners that can deliver the best possible end product.

Three challenges in particular must be addressed:

click-to-tweetClick to Tweet: 3 Universal Challenges of
Building Product #Manufacturing

Building Product Manufacturers' machinery have certain limitations

Factory machines, with inherent limitations, are used for manufacturing building products.

1. Factory machinery’s capability limitations.


Smart Facilities: The Next Generation of Sustainable Management and Operations

Thursday, August 25th, 2016

click-to-tweetTweet: Smart Facilities: The Next Generation of #Sustainable Management &
Operations | #smartcities @Dassault3DS @aeccafe

Rhomberg Group, Zumtobel Group, Bosch Software Innovations, Modcam AB, and Dassault Systèmes collaborated on a landmark smart office building project, in order to introduce more sustainable management of homes, commercial buildings and factories to smart cities of the future.

The pilot project at the LifeCycle Tower (LCT) ONE building in Dornbirn, Austria was presented during the 2016 Bosch ConnectedWorld event in Berlin, Germany.

The modern LCT ONE, owned by Rhomberg Group and equipped with a state-of-the-art Zumtobel lighting solution and smart controls system, is ideal to turn into an innovative connected building targeting the highest standards of sustainability and user comfort.

The LCT ONE project is the latest from 3DEXPERIENCE® City to virtually represent, extend and improve the real world and manage data, processes and people of sustainable cities.


Intelligent Construction: Transforming the AEC Industry in the Digital Age

Thursday, August 11th, 2016

Excerpted from the keynote address, “Strategic Business Transformation for the Building & Construction Industry,” delivered to the BIM-MEP AUS Construction Innovation 2016 Forum on August 4, 2016 in Sydney, Australia.

click-to-tweetClick to Tweet: Intelligent Construction: Transforming #AEC
in the Digital Age | #BIM @bimmepaus @3DSAEC @Dassault3DS

John Stokoe, CB, CBE, Head of Strategy EuroNorth, Dassault Systèmes

John Stokoe, CB, CBE, Head of Strategy EuroNorth, Dassault Systèmes

The fourth industrial revolution – the Digital Age – is creating the drivers to transform the Construction Industry as it seeks to exploit the significant advantages to be derived from the effective and efficient use and management of data.

Industry-leading technology, developed for other sectors, is exponentially improving value and efficiency, and can be employed to propel Construction into the digital age.

This impacts not only the Construction Industry but also the logistic supply chains which support it, improving capability and skills, and contributing to the economies and construction potential of the countries involved.

The considerable amount of data which is created during the design, development, construction and utilization of the built asset, if properly configured and integrated, can be harnessed to drive value, cut costs and waste, and used to create a digital asset. This data-driven digital equivalent, when used by the end customer, can provide a dynamic platform on which to manage legacy, sustain the present and plan the future.


How Zahner shows clients, “Your fantastic projects are buildable”

Thursday, August 4th, 2016

The following video features A. Zahner Company using the 3DEXPERIENCE platform to better communicate and collaborate with AEC project owners and team members:

zahner video 1

click-to-tweetClick to Tweet: How @azahner shows clients
“Your Fantastic Projects Are Buildable”

CEO William Zahner predicts future facades will increase in complexity, including more dynamic and kinetic aspects, and requiring an integrated platform. Such a solution will “open up opportunities for the design and fabrication community to do some really amazing things.”

The Zahner team found that developing precise 3D models gives reassures to clients that their risk is mitigated.

In addition, they are better able to communicate openly, transparently with clients, contractors, architects, subcontractors throughout the project.

Because of its complexity and the amount of coordination required, the Chrysalis Amphitheater was the flagship project where Zahner used the 3DEXPERIENCE platform.


End BIM Fragmentation: Embrace Collaboration with “Design for Fabrication”

Thursday, July 28th, 2016

Design for Fabrication hero image

Today’s AEC projects are more complex than ever, achieving heights, shapes and performance capabilities undreamed of a few years ago. Yet even as owners demand more from their buildings, many AEC professionals are still using processes that lead to redundant design, idle labor and significant rework.

There is now a solution available that harnesses the expert knowledge of the entire AEC team to create processes that are as efficient as the resulting project.


GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy