Archive for the ‘AutoCAD’ Category
Wednesday, May 28th, 2014
I heard Peter Hansford, the Chief Construction Advisor to HM Government, UK speak about the Crossrail project at the Bentley Year in Infrastructure conference in London, 2013. While I’m not in attendance at the inaugural GEO Business 2014 event, Hansford is presenting a keynote at that conference.
With a career that has spanned positions at Amey, Maunsell, the Strategic Rail Authority and Gardiner and Theobald, Hansford has spent the majority of his career on highways and railways with project management largely being his focus. Peter is also an ardent advocate and supporter of the BIM initiative.
Tuesday, May 27th, 2014
Mary Hope McQuiston, director of marketing for the Autodesk consumer group, answered our questions about Autodesk’s groundbreaking 3D printer and software:
Friday, May 23rd, 2014
IES announced that its Virtual Environment (VE) software has been officially approved for commercial building compliance with the new California Building Regulations, Title 24. VE 2014 Feature Pack is the first commercial software to be approved, and available for the launch of the regulations on July 1st. Interesting to note that California is the first and only state to introduce third party software vendor access to performance based building regulations.
According to the press release, IES is currently the only software provider in California to combine holistic design and commercial building compliance in one software pack. It will provide an alternative calculation method for demonstrating performance compliance with the non-residential provisions of the 2013 Building Energy Efficiency Standards, California Code of Regulations, Title 24, Part 6, and associated administrative regulations in part 1, Chapter 10 (Standards).
Friday, May 16th, 2014
Autodesk reported financial results for the first quarter of fiscal 2015 on Thursday, May 15.
From the press release, here are the following primary results:
First Quarter Fiscal 2015
• Total billings increased 10 percent, compared to the first quarter of fiscal 2014.
• Total subscriptions increased by over 89,000, compared to the fourth quarter of fiscal 2014.
• Revenue was $593 million, an increase of 4 percent, compared to the first quarter of fiscal 2014 as
reported, and increased 5 percent on a constant currency basis. Revenue contribution from the recent
acquisition of Delcam was immaterial to first quarter results.
• GAAP operating margin was 7 percent, compared to 14 percent in the first quarter of fiscal 2014.
• Non-GAAP operating margin was 17 percent, compared with 24 percent in the first quarter of fiscal
2014. A reconciliation of GAAP to non-GAAP results is provided in the accompanying tables.
• GAAP diluted earnings per share were $0.12, compared to $0.24 in the first quarter of fiscal 2014.
• Non-GAAP diluted earnings per share were $0.32, compared to $0.42 in the first quarter of fiscal 2014.
• Deferred revenue increased 13 percent to a record $964 million, compared to the first quarter of fiscal
• Cash flow from operating activities was $219 million, compared to $224 million in the first quarter of
The full press release, complete with predictions and webcast presentations can be found here.
Wednesday, May 14th, 2014
For many years now, low-cost CAD options have taken up the slack for an industry of potential users just getting into CAD, and those who may not need a full-fledged higher priced CAD program such as AutoCAD or Bentley MicroStation. All of these CAD options have mobile capabilities for tablet or smartphone users, either on both Android and iOS or on one of them.
Tuesday, April 22nd, 2014
On April 16, Bentley Systems announced its 2013 annual results in a press call. Bentley is a private company and uses the opportunity to highlight its annual accomplishments such as its involvement in trends and new products. Bentley is a leader in the market in the areas of electric power generation, electric power transmission, distribution and communications; water and wastewater distribution, EPC and AEC, and mining and metals.
Bentley’s view of BIM Level 3, as the amount of available information increases, it is also pushed out for broader access by more stake holders. (Image courtesy: Bentley)
Friday, April 11th, 2014
Able2Extract is a conversion tool to convert PDF to AutoCAD formats, as well as PDF to Excel, Word, PowerPoint, Publisher, HTML, image formats and much more.
According to a company spokesman, AutoCAD users may need to convert vector images and text locked in native PDF files to editable DWG or DXF files. AutoCAD offers the ability to save a drawing as PDF, so users can share their drawings, plan or projects with their clients, project leaders or other stakeholders. Professionals from various fields often choose to share their work (designs or drawings) in PDF because the PDF format is platform-independent and doesn’t require the native application to view the document. Another advantage of PDF is that it preserves the formatting of documents, so the sender (file creator/author) ensures that the recipients of the file see it as they are intended.
Wednesday, April 2nd, 2014
Land surveyors, contractors and civil engineers will be pleased by these releases designed specifically for them: MicroSurvey, the maker of MicroSurvey CAD and the MapScenes System, recently announced the release of MicroSurvey inCAD 2014 and MicroSurvey embeddedCAD 2014.
The MicroSurvey inCAD 2014 plugin makes AutoCAD into a survey and design powerhouse. The MicroSurvey feature set can be added to the latest Autodesk software – including AutoCAD 2014, AutoCAD Civil 3D 2014, and AutoCAD Map 3D 2014 – with complete survey drafting toolkit, including COGO, DTM, traversing, adjustments, volumes, contouring and more.
Thursday, March 27th, 2014
Autodesk InfraWorks 2015 now offers a new, more intuitive user interface to help speed workflows. Image courtesy of Autodesk
Wednesday, February 26th, 2014
Recently released upgrades for TurboSite Pro and TurboSite Plus, the award-winning apps for field reporting from IMSI/Design, now add video markup to BIM and PDF support. TurboSite Pro v2.5 shows BIM properties and displays 3D section cuts.