In early June, Topcon Positioning Group and Bentley Systems unveiled a new level of direct communication between Bentley’s design applications and Topcon’s mobile work force products found in the forthcoming release of its MAGNET 4.0. With direct communication from MAGNET Enterprise to Bentley’s ProjectWise, users of Topcon’s family of MAGNET and 3D-MC software solutions can now, while working in the field, access or receive i-models created by Bentley’s OpenRoads design modeling technology. To find out more about the agreement and how MAGNET works with Bentley applications, AECCafé Voice spoke with Dustin Parkman, Bentley’s vice president of product development.
Posts Tagged ‘TopCon’
Bentley Design Applications and TopCon’s Mobile Work Force Streamline Field Operations with MAGNET 4.0Thursday, June 30th, 2016
Robots for the future jobsite, flying drones for delivering packages and reality capture were all part of the show at Tuesday morning’s Mainstage presentation at Autodesk University 2013. The event kicked off with a short little skit by Penn & Teller, who will apparently provide an entire show for AU attendees on Thursday.
This past week Autodesk announced three acquisitions: two for BIM for infrastructure – the technology assets from Bestech Systems and Savoy Computing, Ltd. These investments extend Autodesk’s infrastructure portfolio for road and bridge design and greater adoption of BIM. For third are technology assets from Get The Point, LLC.
- Sam — A suite of software modules from UK-based Bestech Systems for loading, analysis and design of small and medium bridge spans. The software will help Autodesk customers save time and increase accuracy and data consistency during the analysis phase of bridge design..
- AutoTrack – A suite of software from Savoy Computing, LTD for road, light rail, airport, parking and intersection analysis and design. The technology will further support infrastructure planning by architects, designers and engineers.
Secondly, Autodesk acquired technology assets from Colorado-based Get The Point, LLC and introduced Autodesk Point Layout, new software for layout at construction sites. The acquisition will extend Autodesk’s construction solutions portfolio and BIM in the field.
Autodesk Point Layout automatically creates points from BIM and CAD models within Autodesk Revit, Autodesk AutoCAD and Autodesk Navisworks software. The point data drives robotic total station hardware, such as Topcon’s line of positioning systems and related hand-held devices or tablets, to give contractors and sub-contractors laser-guided pinpoint accuracy for the placement and verification of building elements.
By removing error-prone manual layout techniques, Autodesk Point Layout improves field accuracy and productivity, as building designs are more available and accurate at the construction site. The software used in combination with Autodesk BIM 360 portfolio for field management and coordination will add to the productivity at construction sites and on entire projects.
At AU I spoke with TopCon Positioning Systems (TPS)’ Brad Burgess, North American sales manager for scanning products, about the ScanMaster CAD Link which they were demonstrating at the show. CAD Link provides users with an interactive link between ScanMaster and AutoCAD and enables them to efficiently extract and draw objects.
The ScanMaster CAD Link makes editing point cloud data collected by the GLS-1500 scanner through the drawing operation via AutoCAD very smooth and efficient.
The main functions of CAD Link for ScanMaster are as follows:
— Synchronize views between ScanMaster and AutoCAD.
— Send coordinates, distances by picking scans data.
— Send ortho-images as background images of AutoCAD screen.
— Synchronizing UCS (User Coordinate System).
CAD Link had been released several weeks before the show. TopCon is active in various industry segments, and very busy in the heavy construction and machine control industries. The scanning product division covers a couple of vertical markets.
Where once before TopCon was known more as a traditional hardware manufacturer, now they are very involved on the office side. There has always been some software packaged with TopCon hardware.
“It’s a necessity today because once you collect the data it’s got to be processed in some manner so it can be consumed in the traditional design packages like Autodesk and MicroStation, and Carlson,” said Burgess. “You don’t have a solution unless you can move your data off your hardware platform and into your customers’ CAD platform.”
In the past 10-20 years or more, there has always been a multi-step process to move data. There were always a number of hoops to jump through to get that done. “What is different about this is a customer that’s using our scanning technology in conjunction with our ScanMaster software, doesn’t have to export a certain file format and then import that back with the CAD Link data. With the link created, as you’re working in ScanMaster software extracting features, those features are automatically and simultaneously populated in the AutoCAD environment. So there is no import/exporting, it’s just happening in real time.”
By creating this link you’ve really streamlined a couple of keystrokes and there is no glitch of having to have compatible versions, it’s a seamless workflow.
CAD Link provides a link between the two worlds of data production and design. “Even if you went to a surveying engineering company you might find surveyors in the basement and the designers are on the second or third floor,” Burgess pointed out. “Now we truly have a product that links these communities together with one piece of software.”