Open side-bar Menu
 AECCafe Today
Susan Smith
Susan Smith
Susan Smith has worked as an editor and writer in the technology industry for over 16 years. As an editor she has been responsible for the launch of a number of technology trade publications, both in print and online. Currently, Susan is the Editor of GISCafe and AECCafe, as well as those sites’ … More »

Trying IMSI/Design’s Free TurboViewer

 
June 24th, 2011 by Susan Smith

IMSI/Design recently announced the debut of TurboViewer, a free app that allows fast viewing of native 3D DWG files on iPad and iPhone.

 

Shown is the Documents screen which displays documents you might store on TurboViewer.

When you open a file in TurboViewer, it will autosense whether you have
opened a 2D file or a 3D file. If you’re in a 3D file it will change the
gesture slightly to optimize its usage.

The main point of TurboViewer, said CEO Royal Farros, is its performance, and
noted that on the 3G iPhone I had it was going to be a bit slower than
on a 4G, or on an iPad, but I didn’t notice that it was slow at all. For
orbiting, zooming in and panning a drawing you can use standard iPhone
commands such as pinch to zoom in and out, do a single finger navigation
to orbit around a drawing. If you have files that are on the web,
select those from your web browser and download those. You can also email yourself files that can be viewed in TurboViewer.

For the full story see AECWeekly on Monday, June 27.

Project Photofly 2.0 Louise Leakey Suidae on Autodesk Labs

 
June 17th, 2011 by Susan Smith

YouTube Direkt

Project Photofly can be used to make 3D models from 2D photographs.

Quote for the day

 
April 13th, 2011 by Susan Smith

“Invisible infrastructure is the most radical change.”

— Steven Spielberg

sg2011 – Day Six investigates structural behavior, design for data and more

 
April 8th, 2011 by Susan Smith

SmartGeometry held in Copenhagen was all about architectural research. The Royal Danish Academy of Fine Arts School of Architecture brochure states that one of the most important purposes of architectural research is to “develop new models for the way we build and design the world in a time characterized by new technological possibilities and great challenges.”

Day Six of SmartGeometry (sg2011) in Copenhagen kicked off with a talk by Mette Ramsgaard Thomsen, professor and head of CITA, on the topic “Materializing the Invisible.”

She said they have built a series of speculative models in textile design, where they made iterative models over and over again, so they can return to one single description to bring together as one soft shell construction.

They learned two things from doing this: the unfolding of the complex surface is very complicated to do with the computer but extremely easy to do with your hands, “the simplicity is immediate to me,” she said. “The relationship between the digital and craft is not necessarily immediate. The drawing changes in its role; rather than thinking of drawing as a section cut, it becomes a section, the detailing and creases are inscribed, it’s the way the material is given its performance.”

The parallel project for this is “It’s a Small World,” which is an exhibition they were asked to create to show something all the way down to small design. This is about how to organize models and they used fractal order to achieve it.

“Our interest became how we could organize different elements, trying to develop a model that performs. Using GenerativeComponents, we developed a parametric design environment that could take us from design process all the way through to fabrication,” said Thomsen.

It’s A Small World created an economy that really isn’t present in research. They implemented non-traditional design practices to make new use of old materials. These surfaces were highly inhabited. “Therefore there was a rift between systematic thinking of these structures and the design intent of the curators. We had to adjust the way we were working with these structures,” Thomsen explained.

Another research project, DevA, investigated the structural behavior of bent steel sheet and how it be used in architectural design.

In contrast, Lisa Amini, director, Smarter Cities Technology Centre, IBM Research, Worldwide Smarter Cities Program talked about her program which she is building from the ground up. She quoted Steven Spielberg: “Invisible infrastructure is the most radical change.”

“The economies of scale are in cities,” said Amini. “We believe this is where people will live.” It is therefore prudent to design for data, and have your designs be influenced so they can collect data, to be able adapt to missions and the environment.

She sees a “Citizen centric vision” where citizens use mobile devices to collect data and will become very active data producers.

Ben Van Berkel, founder of Unstudio, talked about how the architect can rethink his position. His organization is a specialist organization that specializes with specialists around it. He spoke about the Mercedes Benz Museum 2001 for which there was a short time to design and build it. Used on this project was an animation technique could make 300 changes within the 3D model so people could stay working on the development of the model, and everyone updated the same day. So the need for compactness made it possible for those involved in the project to rethink the project.

Autodesk AEC Media Day 2011 – Day Two

 
April 8th, 2011 by Susan Smith

At Autodesk’s AEC Media Day 2011 held in Waltham, Mass. the past two days, the opening discussion revolved around the various Design Suites which now encompass Autodesk products. According to Jay Bhatt, senior vice president, AEC Solutions, suites are a simplified way for customers to absorb their technologies. What the Suites are now: plant, building and infrastructure, and are sold in standard, premium and ultimate packages. Suites promise customers:

  • Reduced cost
  • Improving compatibility
  • Ability to update (e.g patches and service packs) apps all at once
  • Streamlines license management

What customers are asking for:

  • Flexibility to innovate
  • Economical and convenient
  • Comprehensive and sophisticated

All the Revit products – Revit Architecture, Revit MEP, and Revit Structure are being sold in the same suite now. The reason is that there may be a need to explore some of the other Revit tools even if you mainly are an architect, MEP, or structural engineer.  According to Autodesk, Revit is being used for concept design now.

BIM is expanding into water and wastewater and storm systems, management and routing, and analysis tools are built into that portfolio.

There were lots of figures tossed out at the event, mainly to illustrate the dire need for spending on infrastructure.

This AEC day really felt like there was so much information, it kept whizzing by as executives worked hard to get their message across. There was the feeling that they had lived with the reality of some of these thoughts and technologies for some time. It was unclear at many points in the presentations whether products discussed were currently available, available only on Autodesk Labs or were in the “technology” category which means they haven’t become a product yet. Upon further investigation, Project Neon is a cloud technology on Labs, some new structural technology shown is in the “technology” phase, and Dasher is in the pilot phase and not on Labs.

Topics included the need to get concept energy and analysis data into existing building, and doing 3D laser scans of buildings to get accurate data of  existing conditions.

I thought it was curious to have Inventor inside the the Building Suite, aimed at construction professionals, when Inventor is what we all know of as an MCAD product. The reasoning is that contractors want to do their own prefabrication of bolts and small parts – not necessarily fabricating entire sections of wall or things of that nature.

BIM 360 is a new tool (not sure if it’s available yet) “to provide AEC project teams with a view of their project whereever they are.” The entire AEC collaboration data solution includes BIM 360, Vault, and Buzzsaw.

Navisworks is where the BIM model comes together, and enables people to look at the whole project – create walkthroughs, analysis,  construction, simulation model viewing, clash detection and 4D scheduling.

GRAPHISOFT: ARCHICAD download 30-day FREE trial
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise