Open side-bar Menu
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Lanternen in Langgata, Sandnes, Norway by Atelier Oslo/AWP

April 22nd, 2011 by Sumit Singhal

The site is a small square in Langgata in the center of Sandnes. With approximately 60,000 inhabitants, Sandnes is half the size of its close neighbor Stavanger. The two cities were the cultural capital of Europe 2008. Langgata is the heart of the older part of the town, and the traditional area for shopping and a Saturday stroll.

During the last decades the city center has moved towards the sea front, into the former industrial areas along the harbor. Langgata is now in competition with the sea front area and its indoor shopping center.

Night View

  • Architect: Atelier Oslo/AWP
  • Project: Lanternen
  • Location: Langgata, Sandnes, Norway
  • Area: 140m2
  • Number of floors: 1
  • Volume: 900m3
  • Type of project: Public space. Pavillion in Langgata, main street of Sandnes
  • Planned: 2006-2008
  • Built: Finished in November 2008
  • Client: Sandnes Municipality
  • Structural engineer: Kristoffer Apeland AS

Front View

Competition – program:

As part of the program of the Cultural capital of Europe 2008, Norwegian Wood aimed at realizing a series of exemplary building projects through international architectural competitions.

As one of the Norwegian Wood projects, the municipality of Sandnes asked for a pavilion that could revitalize Langgata. The pavilion should be a shelter for different types of activities; a meeting point, a market place and a place for concerts and performances.

Night View

Project ambitions:

The team of Atelier Oslo and AWP developed the competition project during in a series of workshops in Paris and Oslo, including a trip to the site. From the interpretation of the site and the program, three main ambitions were the formulated:

– an iconographic, recognizable and big structure; a possible landmark for Sandnes

– an open, flexible and informal space, giving priority to the everyday urban life

– interaction with weather and daylight to create a changing experience for the daily passersby


Project elements:


The floor is light concrete, cast on site as a continuous surface. The concrete is polished and has a sandblasted pattern which creates the needed friction. The light colored floor enhances the play of shadows and light from the roof. The smoothness and precise detailing gives an interior feeling to the whole square.



The roof is held up by four groups of columns. The column members are 150x150mm massive oak with steel joints. The members spread out to distribute the pressure of the roof and secure lateral stability. In some places the columns form benches when meeting the ground. The brackets of the columns were made telescopic to be able to match the level of precision of the roof.

The columns are individual and sculptural, in contrast to the simple shape of the roof. The columns are withdrawn from the edge of the roof to be protected from the rain, but also to blur the definition of inside and outside. The asymmetrical positioning of the columns creates different informal spaces.



The roof construction consists of laminated pine with steel joints. The precision level of the roof demanded laminated wood, which ruled out the use of oak. The construction is a double grid made solely of 90x90mm members. This uniform structure, where there is no division between primary and secondary elements create an abstract and lightweight sensation. The construction creates a rich play of shadows and light in the roof and on the floor.



The wooden roof is covered with laminated glass. The glass panels are mounted in an overlapping pattern, as in a traditional slate roof. The overlap incorporates eventual movement between the panels. This allows

the glass to be mounted directly onto the wooden structure, avoiding the typical steel profiles and substructure. A translucent pattern is printed on the panels, to add to the light filtering qualities of the project.




A series of model studies were carried out to develop the project. From scale models of the complex geometry of the columns and the proportions and light filtering qualities of the roof, up to 1:1 studies of the glass silk screen print.

The complex geometry called for a further development in a digital model. The chaotic nature of the structural system could not be split into two-dimensional parts, but demanded a global static evaluation that could only be done in a digital model.

All involved consultants and contractors collected the information that they needed from the same digital model. The architects coordinated the input from the consultants and revised the digital model accordingly. The model was also used as a communication tool and as assembly instruction directly from the computer screen.

Night View


Contact Atelier Oslo/AWP and Atelier Oslo/AWP

Tags: ,

Category: Pavilion

Leave a Reply

Your email address will not be published. Required fields are marked *



Kenesto: 30 day trial
Bentley: - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise