Open side-bar Menu
 ArchShowcase

Archive for October 29th, 2011

A Room Over the Sea in Molo Nord, Italy by Studio Zero85 (designed using Vectorworks)

Saturday, October 29th, 2011

Article source: Studio Zero85

Renovation of the “trabocco” above a port canal in Pescara
The trabocco is an old “fishing machine” typical of the Adriatic coast. These construction consist of a platform set on pilots above the sea. Horizontally is fixed by long poles or antennas, carring a large fishing net stem out from the platform.

Image Courtesy Sergio Camplone

  • Architects: Studio Zero85
  • Project: Trabocco: A Room Over the Sea
  • Location: Molo nord, Pescara (PE), ITALY
  • Design team: Mario Michetti, Giovanna Pizzella, Mirko Giardino
  • Project area: area of trabocco 24 mq, area of platform 112 mq
  • Project Year: 2005_2009
  • Photographs: Sergio Camplone
  • Structural enginee: Paolo Cerasoli
  • Furniture: euVivo, pescara
  • Software used: Vectorworks

(more…)

House in Horinouchi, Japan by Mizuishi Architect Atelier (designed using Vectorworks)

Saturday, October 29th, 2011

Article source: Mizuishi Architect Atelier

This is a very small house built on the triangle site where the river and the road were crossed and made to the acute angle.For the dead-end road, it became a plan in various regulations for obtaining special permission. Residents are husband and wife and a little girl. Although it was a novel site of a limited area, since a river was faced through a bank and a promenade, I would like to design various relations with the river. The building is the form that cut an acute angle part on a triangle plan derived from the site.Furthermore,it got the maximum volume of hip roof of three planes in regulation of setback-line.

Exterior view

  • Architects: kota mizuishi / Mizuishi Architect Atelier
  • Project: River side house / House in Horinouchi
  • Location: Suginami, Tokyo, Japan
  • Type: residential house
  • Structural engineer: Kentaro Nagasaka
  • Lighting designer: Tatsuoki Nakajima
  • Contractor: Hirano-Kensetu
  • Site area: 52.14m2
  • Building area: 29.07 m2
  • Total floor area: 55.24 m2
  • Structure : wood
  • Story : 2
  • Software used: Vectorworks

(more…)

Shanghai Expo Pavlion in China by UnSangDong Architects

Saturday, October 29th, 2011

Article source: UnSangDong Architects

We imagine Korean Corporate Pavilion coinciding with the subjects; Green city and Green life.

It is named Communi-Imagination and it holds introspection of environment together with innovation of technology. Korea got over the unfortunate situation of the Korean War which didn’t seem to be possible and has achieved unimaginable development and innovation. This space represents technology and spirit of Korean enterprises which is the main agent of these accomplishments. The spirit and the technology of 12 Korean enterprises which are developing towards higher-tech such as information technology, distribution, aviation, electronic, vehicle, chemistry and shipbuilding are represented in the architecture by diverse exhibitions and videos.

ShangHai Expo Pavlion

(more…)

Casa Cor Bar in Belo Horizonte, Brazil by BCMF Arquitetos

Saturday, October 29th, 2011

Article source: BCMF Arquitetos

The brief for the Casa Cor Bar required us to explore the formal possibilities of applying a very simple and  inexpensive construction system: the light steel frame. Industrialized resistant high quality materials (stainless  steel plate, mirror finishing on the outside and matte on the inside) clad this custom designed object  built in just 3 weeks, to be portable and usable in various ways.

Overall interior view (Image Courtesy BCMF Arquitetos/Jomar Bragança)

  • Architects: BCMF Arquitetos (Bruno Campos, Marcelo Fontes e Silvio Todeschi)
  • Project: Casa Cor Bar
  • Location: Belo Horizonte, MG (Brazil)
  • Dates (design): April / June 2010 (construction): July 2010
  • Area: 69m2
  • Client: Casa Cor / Arcelor Mittal / Stella Artois
  • Materials: Steel Frame + Stainless Steel + Carpet
  • Structute: Flasan (Steel Frame)
  • Cladding: Perfilor
  • Construction: Casa Cor MG (João Grillo)

(more…)

Parliament of the German Speaking Community in Eupen, Belgium by Atelier Kempe Thill Architects

Saturday, October 29th, 2011

Article source: Atelier Kempe Thill Architects

In November 2008, Atelier Kempe Thill won the international competition for the new parliament building of the German Speaking Community in Eupen, Belgium. The parliament – one of the smallest in Europe- officially represents the 74.000 inhabitants of  the speech community located in the East of Belgium.

New Outside View

  • Architects: Atelier Kempe Thill Architects
  • Project: Parliament of the German Speaking Community
  • Location: Eupen, Belgium
  • Client: Parliament of the German Speaking Community Eupen, Belgium
  • Assignment: Conversion of an existing sanatorium building and extension
  • Architect Team: Atelier Kempe Thill architects and planners, Rotterdam, Netherlands, in collaboration with Artau scrl Malmedy as subcontractor
  • Structural engineering: Kempen Krause Aachen, Germany
  • Building services: ZWP Cologne, Germany
  • Project management: Drees und Sommer, Luxembourg

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy