Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

House Hoefman in Heerenveen, Netherlands by Lautenbag Architectuur (designed using AutoCAD)

 
November 10th, 2011 by Sumit Singhal

Article source: Lautenbag Architectuur

The parcel is 18 meter wide and 32 meter deep and is situated with the garden on the south side. The strict regulations of this development site define for a large part the shape of the building. However, there is enough room to give the house an individual character and to create a high quality home. It’s the organization and technical detailing that makes the house special. The orientation of the site asks for a living space as large as possible adjacent to the garden, to create maximum contact between the living room and the garden. Therefore the total rear facade of the house is glass.

In the matt timber front facade the shiny aluminum is a real eye-catcher

  • Architects: Lautenbag Architectuur
  • Project: House Hoefman
  • Location: Heerenveen, Netherlands
  • Engineer: Bureau 44
  • Construction Company: Bouwbedrijf Siebenga
  • Project Area: 580 sqm
  • Project Year: 2010
  • Photographs: Diana Lautenbag
  • Software used: AutoCAD

Rear facade, 11 meters of glass facade

The terrace and sunscreen adjoining the house makes the border between inside and outside as small as possible. The glass facade also creates maximum daylight into the living room. In winter this leads to a lower energy consumption. Less artificial light and less heating will be necessary. The porch is detailed in a way that sunlight in winter goes underneath and in summer the sun stays out. By using the whole width of the site for the house, maximum depth is left for the garden, and it’s shielded from the street. The house is 30 cm lifted from the site. At the street side, the house is more outstanding and at the back of the house, the terrace looks floating.

 

The light gray PVC window frames in the side facades are placed in the plane of the brick facade to strengthen the abstract image

Materialization:

The sturdy steel plinth that lifts the home of the surface is immediately noticeable. Large, bright red in stacked bond masonry brick enhances the tough appearance. In the matt timber front facade the shiny aluminum is a real eye-catcher. The sharp angles in these aluminum frames reflect light in different directions. This gives a playful effect. The light gray PVC window frames in the side facades are placed in the plane of the brick facade to strengthen the abstract image.

 

The border between inside and outside is made as small as possible

Interior:

There is a lot of space inside and every inch of the space is used wisely. Carefully placed lights define space for lounging, dining and cooking. The see-trough fireplace both separates and unites the television room and the kitchen. White interiors, huge transparent voids covered with glass and parallel doors along the house also help to create more of space inside.

 

More than 30 m2 terrace

Installation:

The house is suit with a modern automation system. All electric devices in the house can be controlled by I-phone or I-pad. Therefore almost no switches were needed in this house. Before the owner gets home, he can for example turn on the floor heating and fireplace, make coffee, switch on the lights in the places he chooses, turn on the sauna and open the garage door. Whenever the owner leaves he can use the button that switches off all electrical devices, so there will be no waste of energy.

 

The porch is detailed in a way that sunlight in winter goes underneath and in summer the sun stays out

Dining and cooking

The see trough fireplace

Parallel doors from kitchen to entrance

Stairs with void and roof light

The light plan is very structured

Stairs with void

Tags: ,

Categories: Autocad, House




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise