Open side-bar Menu

Archive for 2011

A Room Over the Sea in Molo Nord, Italy by Studio Zero85 (designed using Vectorworks)

Saturday, October 29th, 2011

Article source: Studio Zero85

Renovation of the “trabocco” above a port canal in Pescara
The trabocco is an old “fishing machine” typical of the Adriatic coast. These construction consist of a platform set on pilots above the sea. Horizontally is fixed by long poles or antennas, carring a large fishing net stem out from the platform.

Image Courtesy Sergio Camplone

  • Architects: Studio Zero85
  • Project: Trabocco: A Room Over the Sea
  • Location: Molo nord, Pescara (PE), ITALY
  • Design team: Mario Michetti, Giovanna Pizzella, Mirko Giardino
  • Project area: area of trabocco 24 mq, area of platform 112 mq
  • Project Year: 2005_2009
  • Photographs: Sergio Camplone
  • Structural enginee: Paolo Cerasoli
  • Furniture: euVivo, pescara
  • Software used: Vectorworks


House in Horinouchi, Japan by Mizuishi Architect Atelier (designed using Vectorworks)

Saturday, October 29th, 2011

Article source: Mizuishi Architect Atelier

This is a very small house built on the triangle site where the river and the road were crossed and made to the acute angle.For the dead-end road, it became a plan in various regulations for obtaining special permission. Residents are husband and wife and a little girl. Although it was a novel site of a limited area, since a river was faced through a bank and a promenade, I would like to design various relations with the river. The building is the form that cut an acute angle part on a triangle plan derived from the site.Furthermore,it got the maximum volume of hip roof of three planes in regulation of setback-line.

Exterior view

  • Architects: kota mizuishi / Mizuishi Architect Atelier
  • Project: River side house / House in Horinouchi
  • Location: Suginami, Tokyo, Japan
  • Type: residential house
  • Structural engineer: Kentaro Nagasaka
  • Lighting designer: Tatsuoki Nakajima
  • Contractor: Hirano-Kensetu
  • Site area: 52.14m2
  • Building area: 29.07 m2
  • Total floor area: 55.24 m2
  • Structure : wood
  • Story : 2
  • Software used: Vectorworks


Shanghai Expo Pavlion in China by UnSangDong Architects

Saturday, October 29th, 2011

Article source: UnSangDong Architects

We imagine Korean Corporate Pavilion coinciding with the subjects; Green city and Green life.

It is named Communi-Imagination and it holds introspection of environment together with innovation of technology. Korea got over the unfortunate situation of the Korean War which didn’t seem to be possible and has achieved unimaginable development and innovation. This space represents technology and spirit of Korean enterprises which is the main agent of these accomplishments. The spirit and the technology of 12 Korean enterprises which are developing towards higher-tech such as information technology, distribution, aviation, electronic, vehicle, chemistry and shipbuilding are represented in the architecture by diverse exhibitions and videos.

ShangHai Expo Pavlion


Casa Cor Bar in Belo Horizonte, Brazil by BCMF Arquitetos

Saturday, October 29th, 2011

Article source: BCMF Arquitetos

The brief for the Casa Cor Bar required us to explore the formal possibilities of applying a very simple and  inexpensive construction system: the light steel frame. Industrialized resistant high quality materials (stainless  steel plate, mirror finishing on the outside and matte on the inside) clad this custom designed object  built in just 3 weeks, to be portable and usable in various ways.

Overall interior view (Image Courtesy BCMF Arquitetos/Jomar Bragança)

  • Architects: BCMF Arquitetos (Bruno Campos, Marcelo Fontes e Silvio Todeschi)
  • Project: Casa Cor Bar
  • Location: Belo Horizonte, MG (Brazil)
  • Dates (design): April / June 2010 (construction): July 2010
  • Area: 69m2
  • Client: Casa Cor / Arcelor Mittal / Stella Artois
  • Materials: Steel Frame + Stainless Steel + Carpet
  • Structute: Flasan (Steel Frame)
  • Cladding: Perfilor
  • Construction: Casa Cor MG (João Grillo)


Parliament of the German Speaking Community in Eupen, Belgium by Atelier Kempe Thill Architects

Saturday, October 29th, 2011

Article source: Atelier Kempe Thill Architects

In November 2008, Atelier Kempe Thill won the international competition for the new parliament building of the German Speaking Community in Eupen, Belgium. The parliament – one of the smallest in Europe- officially represents the 74.000 inhabitants of  the speech community located in the East of Belgium.

New Outside View

  • Architects: Atelier Kempe Thill Architects
  • Project: Parliament of the German Speaking Community
  • Location: Eupen, Belgium
  • Client: Parliament of the German Speaking Community Eupen, Belgium
  • Assignment: Conversion of an existing sanatorium building and extension
  • Architect Team: Atelier Kempe Thill architects and planners, Rotterdam, Netherlands, in collaboration with Artau scrl Malmedy as subcontractor
  • Structural engineering: Kempen Krause Aachen, Germany
  • Building services: ZWP Cologne, Germany
  • Project management: Drees und Sommer, Luxembourg


Medical Centre in Milagro, Navarra by Doblee Architect

Friday, October 28th, 2011

Article source: Doblee

The project, beside giving content to the program of a medical doctor’s office, tries to generate a dialog between the interior of the building and the public space that surrounds it, having in it counts the sun and the spaces of privacy of the consultations.

Image Courtesy Josema Cutillas

  • Architects: Doblee Architect
  • Project: Medical Centre in Milagro
  • Location: parcel nº 782 of the polygon nº1, between the street Profesor Turrillas and San Juan Avenue, Milagro, Navarra (Spain).
  • Architect Design: Borja Izaguirre Larrañaga, Cristina Arregi Gonzalo, Silvia Echeverría Echeverría, Beatriz Gil Rodríguez
  • Promoter: Town Hall of Milagro (Spain)
  • Constructed Area: 653 m2
  • Date: From:   August 2009 Finish: April 2010
  • Budget: 588.420 Euros
  • Photography: Josema Cutillas


Naust Paa Aure in More og Romsdal, Norway by TYIN tegnestue Architects

Friday, October 28th, 2011

Article source: TYIN tegnestue Architects

The boathouse is a cultural and historical hallmark of Norways coastal regions, where fishing used to be the primary profession. They have traditionally been used for storing boats and fishing gear, but today many of them are being converted for recreational summer use. This particular boathouse is located on the outermost reaches of the Moere-coast, and it hails from the middle of the eighteenth century. It was in such a bad state that the owner decided to tear it down and build it anew. The simplicity of the old building, its good placement and honest use of materials would become key sources of inspiration for the design of the new building. Great emphasis was placed on the main construction, the gates of the gable wall and the adaptable long facade.

Image Courtesy Pasi Aalto

  • Architects: TYIN tegnestue Architects
  • Project: Naust Paa Aure
  • Location: Aure Kommune, More og Romsdal, Norway
  • Client: Stein Erik Sørstrøm
  • Project Type: Boathouse
  • Cost: 250.000 NOK, (45,000 USD)
  • Time: April 2010 – January 2011
  • Built by: TYIN tegnestue Architects
  • Architects Design: Marianne Løbersli Sørstrøm, Yashar Hanstad
  • Photography: Pasi Aalto


Connecticut Pool House in Sharon, Connecticut by Resolution: 4 Architecture (designed with FormZ and Vectorworks)

Friday, October 28th, 2011

Article source: 4 Architecture

Located in a natural clearing within a wooded hillside of northwestern CT, this watering hole serves as a sustainable entertainment and relaxation center from the hectic urban existence, a place to go from always being “on”, to actually shutting “off” for a bit – a place to simply chill out.  The 16 x 52 module contains a sleeping zone at one end of the module, and a food prep  consumption digestion zone at the other.  In between sits a recycled black-steel core, a volume containing the bathroom, steam shower, laundry, storage, and a heat-generating fireplace.  Although ‘floating’ in the middle of the space and not connected to a perimeter wall, the core is filled with natural light from a skylight above and frosted glass pocket doors; an outdoor shower brought indoors.

Image Courtesy RES4

  • Architects: Resolution: 4 Architecture
  • Project: Connecticut Pool House
  • Location: Sharon, Connecticut
  • Completion Date: 2011
  • Size: 832 sf
  • Typology Series: Single Bar
  • Software used: FormZ and Vectorworks


Yun Long Digital and Technology park in Zhuzhou, China by NAUTA Architecture

Friday, October 28th, 2011

Article source: NAUTA Architecture

Sustainability in a fast urbanization calls for simplicity, sobriety, pragmatism, elegance. The most efficient way to emerge in a screaming parade is silence.  Yun Long International New Digital Technology Park is a business park providing R&D offices and facilities for innovation industry, which focuses on mid-high level of the market. The project locates in the Yunlong New Town of Changsha-Zhuzhou-Xiangtan (CZT) Region, Hunan Province, China. It is located in the Changtangcun area, in the east of Changzhu regional highway. The park covers a total site area of approximately 48 ha.

Yun Long digital and technology park

  • Architects: NAUTA Architecture
  • Project: Yun Long Digital and Technology park
  • Location:Yun Long New Town, Zhuzhou, China
  • Time: January-April 2011
  • Status: preliminary design
  • Client: Confidential
  • Program: 45ha master plan with offices, social housing, luxury housing, congress centre, kinder garden, cine multiplex, hotel, retail, park


Municipal Theater of Zafra in Spain by Enrique Krahe Arquitectos

Friday, October 28th, 2011

Article source: Enrique Krahe Arquitectos

Public space needs to be continuously reinvented: design premises that prioritize patrimonial or landscape values are compatible with others where recreational or environmental aspects prevail. Located in a small town in the south west of Spain, the Theater of Zafra aims to reconcile the different events that are everyday staged, solving the transition between the monumental city and a ‘periphery’ under construction, through a smooth connection with the pedestrian center.

East Elevation (Image Courtesy Miguel de Guzmán)

  • Architects: Enrique Krahe Arquitectos
  • Project: Municipal Theater of Zafra
  • Location: Zafra, Spain
  • Project Leader: Arancha Montero
  • Collaborator: Jesús Isla, Carlos Brage, Lucía Fernández
  • Foreman Builders: Carlos Rubio Manso, Joaquín Escribano Mediero


Canon: oce crystalPoint
Kenesto: 30 day trial
Bentley: -YII 2018 Awards - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise