ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

71 Council and Private Flats in Sète, France by Colboc Franzen & Associés

 
June 15th, 2012 by Sumit Singhal

Article source: Colboc Franzen & Associés

The building plot lies on the thin strip of land between the Étang de Thau and the Mediterranean Sea on the northern side of the old town, close to the commercial port and its huge industrial facilities. How should we evoke the site’s past and at the same time, through architecture, forge a modern identity for this entrance point to the town of Sète and its emerging neighbourhoods? How should we respond to the titanic scale of the port, with the sea as the horizon, while also maintaining the old town’s way of living?

Image Courtesy Cécile Septet

  • Architects: Colboc Franzen & Associés
  • Project: 71 Council and Private Flats
  • Location: Sète, France
  • Client: Pragma
  • Budget: € 4,171,000 HT
  • Plot surface: 2 956 m²
  • Usable area: 3 913 m²
  • SHON: 4 422 sqm
  • SHOB: 8 050  sqm

Image Courtesy Cécile Septet

  • Architects: CFA (Benjamin Colboc, Manuela Franzen, Arnaud Sachet)
  • Team: Faudry Ulrich, Guillaume Choplain, J. Von Spoeneck.
  • Mission: base + DET followed with architectural
  • Execution project manager : GP Consultants Engineering
  • Control office : SOCOTEC
  • Security coordination : SOCOTEC
  • BET Structure : SECIM
  • BET Fluids : HOLISUD
  • Geo technical engineering : EGSA BTP
  • Start of studies: August 2008 (Direct Drive)
  • Building permit: october 2009
  • Start of construction: march 2010
  • Delivery date: september 2011
  • Photographer : Cécile Septet
  • Program: 71 units including 16 council flats with 370 m² of offices and car park

Image Courtesy Cécile Septet

Sustainable development:

– Certified ‘Habitat et Environnement’
– Certified CERQUAL
– HQE Green Building (targets 1 and 4-10)
– Dual-aspect flats
– Sun protection and control through slats
– Curve of the buildings allows sunlight to reach garden
– Green roof on offices

Image Courtesy Cécile Septet

The project design is based on three blocks of flats set on a ground-floor base. The development comprises four distinct parts: 16 council flats in various configurations; 55 private two- and three-room flats; and shops and car parks to service all of the above. The base accommodates the shops and the car parks, whereas the blocks house the flats. The six-floor block of council flats provides a transition from the existing buildings around it and is therefore located at the centre of the project. The other two eight-floor blocks are thus free to demonstrate their autonomy. The block standing on the street corner marks the entrance to the old town while also looking out towards the commercial port facilities and future developments on the empty docklands. The block at the back is situated above parking spaces and gardens. It looks like a sculpted object in the middle of the ‘island’ and we therefore forget that regulations made it impossible to set the building against the existing party wall.

Image Courtesy Cécile Septet

These blocks also embody a principle of ‘Mediterranean architecture’ that allows for a lifestyle adapted to the local climate: outdoor living protected from intense heat. There are balconies running along the façade and these outdoor extensions allow occupants to walk around the outside of their flats. A galvanised steel screen protects it during very hot weather and also provides a nice amount of privacy. It follows the curve created by the varying widths of the balconies. It lends harmony to the three blocks and makes them easier to interpret. They become gigantic steel cocoons whose materials remind us of the maritime world, while their shape is reminiscent of a ship’s stem and the wind in the screen slats sounds like the jangling of masts in a port. The screen also allow occupants to make appropriate their balconies without disturbing their neighbours, and to create a ‘homely’ feel while also enjoying the view and life in the town centre.

Image Courtesy Cécile Septet

Making good use of the various slopes, the car park creates a man-made topography in the centre of the block of land and harbours a landscape of gardens and parking spaces. The effect is like shelly limestone and it is punctuated with beds of broken rocks and characteristic regional plants. The ground is protected by a layer of bushes and small trees, which provide shade as well as establishing the requisite distance between the flats and people using the car parks.

Image Courtesy Cécile Septet

Image Courtesy Cécile Septet

Image Courtesy Cécile Septet

Image Courtesy Cécile Septet

Plan

Plan

Related posts:

Tags: ,

Category: Apartments

Leave a Reply

Your email address will not be published. Required fields are marked *


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

AIA2015: Atlanta May 12-16 2015
Bentley Map: Add intelligence to your workflow
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2015 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy