Open side-bar Menu
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Holy Family Multipurpose Hall in Queensland, Australia by Ferrier Baudet Architects

June 5th, 2013 by Sumit Singhal

Article source: Ferrier Baudet Architects

The Multipurpose Hall was funded by the Building the Education Revolution (BER) Programme through Brisbane Catholic Education. The client requested an iconic building to provide a much-needed covered outdoor area for sporting activities and arts-based events and to reinforce the school’s identity.

Image Courtesy © David Sandison :Coloured panels are used at lower levels to provide an engaging and child-friendly façade while at higher levels respect is paid to the Holy Family Church behind through the use of neutral colours

  • Architects: Ferrier Baudet Architects
  • Project: Holy Family Multipurpose Hall
  • Location: Indooroopilly, Brisbane, Queensland, Australia
  • Photography: David Sandison
  • Project Team: Wendy Pascoe, Catherine Baudet, Roland Baudet
  • Year: 2011
  • Structural Engineer: Bligh Tanner
  • Electrical+Mechanical Engineer: Multitech
  • Hydraulic Engineer: Chilton Woodward
  • Cost Consultant: Flavio Costanzo
  • Contractor: Walton Construction
  • Client: Holy Family School; Brisbane Catholic Education
  • Budget: AUS$1.5 Million
  • Software used: AutoCAD

Image Courtesy © David Sandison :The coloured façade gives the school a lively street presenc

The building was erected on the site of the existing double tennis courts and is equipped with a full-sized tennis court, handball courts, stage and off stage area, multipurpose room, storage for sports equipment, amenities and AV facilities. The building is used on an every-day basis by the school as a gathering space – it accommodates the entire school cohort – for specific lessons and for play. It is also used by the parish and community to host sporting and cultural events.

Image Courtesy © David Sandison :The building responds to the adjacent playground

The brightly striped façade responds to the vibrancy of the adjacent play equipment and gives the school a presence at street level. The choice of colour was critical to the success of the building – the school colours provided a starting point but these are presented in couplets which allowed the use of strong but not bright colour and prevented any one colour from dominating. At night, the facade is illuminated to great effect. Respect is paid to the Holy Family Church on the same site, through the use of neutral colours at higher levels.

Image Courtesy © David Sandison :The building is clad in robust, low maintenance materials such as concrete block, painted fibre cement sheet, polycarbonate sheet and EPS panels

The floor plan and form of the hall was the result of a close collaborative process with the school principal and the school community was kept well informed of progress throughout. The materials used – fibre cement sheet, concrete block, multicell polycarbonate, EPS walling, timber composite battens and metal cladding – were chosen as they are cost effective, low maintenance and robust and they could be used in combination to provide an engaging and child-friendly space. The space is easily accessed from the school buildings via the covered stair and also from the adjacent playground as much of the southern facade opens up via three large roller doors.

Image Courtesy © David Sandison :The multipurpose hall opens directly to the adjacent play area

Holy Family Multipurpose Hall demonstrates sustainability in that it is appropriate for its environment, is a flexible space designed to accommodate a wide variety of human activity and has been constructed to a limited budget. It demonstrates the following environmental initiatives: underground rain water tank for landscaping and toilet-flushing, dual flush toilets, low energy lighting, wall and roof insulation, natural ventilation and ceiling fans, energy efficient glazing, roller shutters to western facade.

Image Courtesy © David Sandison :User groups are able to access the facility directly from classrooms

At the social level, the building has been designed for a range of activities and user groups – it connects the school and parish to the community and reinforces social networks. It is a safe and comfortable environment which is highly adaptable. The building is engaging and aesthetically pleasing and reinforces the school’s physical presence.

Image Courtesy © David Sandison :The facility, build on the site of the original double tennis court, provides a much-needed covered outdoor area for sporting activities and arts-based events

Economically, the Hall was built with defined funding from low-maintenance and robust materials. Energy-efficient initiatives help to reduce running costs and flexible design may help to reduce future refurbishment costs.The Multipurpose Hall in its prominent location on Central Avenue Indooroopilly gives a small Catholic School a strong physical identity in the local community.

Image Courtesy Ferrier Baudet Architects

Image Courtesy Ferrier Baudet Architects

Image Courtesy Ferrier Baudet Architects

Tags: , , ,

Categories: Autocad, Hall, Multipurpose Hall

Leave a Reply

Your email address will not be published. Required fields are marked *



Canon: oce crystalPoint
Kenesto: 30 day trial
Bentley: -YII 2018 Awards - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise