Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Residence in Bemmel, Netherlands by Maxim Winkelaar Architects & Bob Ronday

 
September 3rd, 2013 by Sumit Singhal

Article source: Maxim Winkelaar Architects

The wish of this client was a white contemporary minimalistic residence in combination with an office space. Architects Maxim Winkelaar and BobRonday made a design that exactly suits the wishes of the client.

The house consists of two floors. The ground floor consists of two rectangular volumes, the smaller rectangular volume is rotated 90 degrees.  Glazed window frames are the connection between the two rectangular volumes which is the entrance of the residence and contains an atrium to the upper floor.

Image Courtesy © Chiel de Nooyer

  • Architects: Maxim Winkelaar Architects & Bob Ronday
  • Project: Residence Bemmel
  • Location: Bemmel, Netherlands
  • Photography: Chiel de Nooyer
  • Client: Private
  • Surface: 335  m2
  • Plot: 1200 m2
  • Contractor: Frank Janssen Bouw
  • Kitchen and Wellness: Hans Buis Keukens
  • Engineer: JVZ Constructies
  • Year: 2007 – 2011

Image Courtesy © Chiel de Nooyer

The large rectangular volume is designed as a loft principle. It is a large open space of 120 m2 which contains the kitchen with bar, dining area, living room and cinema room. In the smaller rectangular volume is the master bedroom with en-suite wellness bathroom (sauna, steam, jacuzzi etc.) and large walk in closet. In the same volume is also the garage with utility room. Both volumes are close to the large porch at the rear of the building which is the hart of the house.  The porch with a width of 10 meters strengthened the inside-out relationship.

On the first floor is an office with roof terrace. Also on this floor are two guest bedrooms and bathroom. The office can easily transform into a living room. This allows that the entire top floor can bean independent apartment as well in the future.

Image Courtesy © Chiel de Nooyer

Sustainable aspects

The plan and functions of the residence is organised to make the maximum use of passive solar energy. The outside walls and roof are thickened in order to get more thermal mass. The property has got a heat pump in combination with a heat recovery system. On the flat roof are solar panels. Next to the house is a natural swimming pond with natural wetland so that the water quality remains optimal without applications of electricity and toxins.

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Chiel de Nooyer

Image Courtesy © Maxim Winkelaar Architects

Image Courtesy © Maxim Winkelaar Architects

Related posts:

Tags: ,

Category: Residential

Leave a Reply

Your email address will not be published. Required fields are marked *


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy