Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

BRIDGE OLYMPIC STADIUM in Amsterdam, Netherlands by René van Zuuk Architects bv

 
November 7th, 2013 by Sumit Singhal

Article source: René van Zuuk Architects bv

The “Na-Druk-Geluk-Brug” is part of the new public space around the Olympic stadium in the Noord-Zuid As area of Amsterdam. The 1928 Olympic stadium was completely renovated and updated to contemporary standards in the late nineties while considering the spirit of the original design made by Jan Wils.

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

The stadium is named in one breath with Berlage’s famous Plan Zuid because of his geometry and horizontality. Nowadays it is not only a statement for the Olympics in 1928, but also a host for several cultural and sports events. The bridge gives access to the public space on the north-west side of the stadium, which is designed for the urban plan of Sant and Co. The solid appearance of the stadium is accompanied by the pavers in the public space to the waterfront.

Image Courtesy © René van Zuuk Architects bv

On the other side of the water, the bridge connects to a roundabout which guides to the Aldo van Eijck’s Burgerweeshuis and an industrial area with block volumes. In the design and materialization the bridge is given an autonomous identity which is not related to the completely different worlds on both sides of the water. The autonomous identity of the bridge is strengthened by the minimal detailing.

Image Courtesy © René van Zuuk Architects bv

In the direction of movement towards the Olympic stadium two viewpoints are designed on a corner located at the level of the bank. At this point the bridge makes a connection with the water by an opening in the bridge-deck and the pedestrian will get confronted with a total different vision of the bridge then that one should expect according to the bridge’s side appearance. On the stadium side the bridge is asymmetrical connected to the square designed by Sant and Co, the branch is oriented to the north-west stand of the Olympic stadium.

Image Courtesy © René van Zuuk Architects bv

The program of requirements prescribes that the passage height has to have a minimum of 2,4 meters and a width of 20 meters. The bridge should span the 40 meters over the canal which made it necessary to make beams with a construction height of at least 1,2 meter to support the vehicle deck. The slope of the pedestrian walkway is not allowed to be more than 4% which was not possible with the given structure. The only solution possible was a separation between the vehicle deck and the pedestrian walkway. By placing the pedestrian walkway at bottom of the beams a smaller slope could be achieved.

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Image Courtesy © René van Zuuk Architects bv

Related posts:

Tags: ,

Category: Bridge

Leave a Reply

Your email address will not be published. Required fields are marked *


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy