Open side-bar Menu
Sanjay Gangal
Sanjay Gangal
Sanjay Gangal is the President of IBSystems, the parent company of, MCADCafe, EDACafe.Com, GISCafe.Com, and ShareCG.Com.

Torrance Memorial Medical Center and Richard Lundquist Tower in California by HMC Architects

December 20th, 2014 by Sanjay Gangal

Article source: HMC Architects

Construction is complete on Torrance Memorial’s new $480 million Melanie and Richard Lundquist Tower. McCarthy Building Companies, Inc. served as general contractor of the hospital facility which was delivered over four-and-a-half months early and $10 million under budget. The hospital held a community celebration on September 20, and the new facility opened to patients on November 16.

Image Courtesy © HMC Architects

Image Courtesy © HMC Architects

  • Architects: HMC Architects
  • Project: Torrance Memorial Medical Center and Richard Lundquist Tower
  • Location: Torrance, California, U.S.A.

Image Courtesy © HMC Architects

Image Courtesy © HMC Architects

Located on an existing medical center site at 3330 Lomita Boulevard in Torrance, Calif., the Lundquist Tower replaces Torrance Memorial’s original facility built in 1971, which no longer meets state seismic regulations for an acute care facility. The new tower utilizes a buckling restraint braced-frame structure, and meets California’s strict seismic requirements for both the structure as well as its contents.

The 390,000-square-foot patient tower features the latest medical technologies, 256 private rooms and 18 surgical and interventional treatment rooms, including the South Bay’s first hybrid operating room. The basement in the seven-level patient tower houses a central utility plant and a tunnel connection leading to the existing hospital facility.

Image Courtesy © HMC Architects

Image Courtesy © HMC Architects

“McCarthy Building Companies’ commitment to partner with Torrance Memorial, focusing on the hospital’s goals to deliver a well built, compliant, functional and beautiful health care facility to the community made it a pleasure to work with them on the Lundquist Tower Project,” said Connie Senner, director of construction, Torrance Memorial Medical Center. “We had a premier team from McCarthy who were knowledgeable and communicative from start to finish.

“I take great pride in knowing that this facility is a legacy to the community and a stunning one at that. It’s been a pleasure to be involved with a building project that has been so highly complimented by the public, staff, volunteers and physicians.”

Designed by HMC Architects, the replacement hospital serves as the new front door of the medical center, and the centerpiece of the campus. A water feature greets patients at the tower’s entrance and leads to a bright and expansive lobby. An indoor-outdoor cafeteria, gift shop, admittance services and a spiritual room are easily accessible on the first floor.

Image Courtesy © HMC Architects

Image Courtesy © HMC Architects

In addition to providing state-of-the-art medical technology, the tower’s patient-centered design addresses the comfort of visiting family members by incorporating family–friendly lounges and overnight spaces. Expansive windows are located throughout the patient rooms, waiting rooms and pre- and post-operation areas to take advantage of natural daylight and views, and outdoor gardens between the new and existing facility provide a serene and healing space for patients, visitors and staff.

“The Lundquist Tower represents a state-of-the-art facility which supports an enriched patient-centered approach to the delivery of health care by staff and the enhanced continuum of care patients receive,” said Chuck Eyberg, principal, HMC Architects. “The new tower’s function is fully integrated with the existing facility on multiple levels through a network of strategically planned connectors, bridges and corridors linking the new tower with the existing facility and the remainder of the campus.”

The tower’s exterior skin is a combination of metal panel, precast concrete, plaster and curtain wall. The variety of materials for the tower’s façade not only responds to the correct solar orientation to reduce energy consumption, but it also gives the tower a contemporary and elegant aesthetic.

Image Courtesy © HMC Architects

Image Courtesy © HMC Architects

Incorporating sustainable features equivalent to the same standards required of a Leadership in Energy & Environmental Design (LEED) silver certified structure, some of the tower’s eco-sensitive design features include individual temperature controls to reduce energy, a white roof to minimize heat gain, low-level perimeter building lighting to reduce light pollution, recycled content and environmentally friendly finishes, as well as the use of water efficient landscaping and a healing garden to reduce the “heat island effect” from excessive use of hardscape. McCarthy implemented sustainable construction methods throughout the project including recycling approximately 80 percent of construction waste, maintaining proper indoor air quality and utilizing local labor.

“Built on an operational hospital campus in an urban site with limited access, construction was multi-phased to alleviate disruption to the operational facility,” said McCarthy Project Director Erik Chessmore.  “McCarthy also created a detailed communication and logistics plan and closely coordinated with the hospital and subcontractors throughout the project.”

In order to provide the design team with constructability input efficiencies along with a progressive schedule and budgeting information, McCarthy used a combination of delivery systems to construct the new facility. Design-assist was incorporated to deliver the Mechanical, Electrical & Plumbing (MEP) systems, structural steel and framing, while design-build was used for the exterior skin, elevators and fire protection system.

“The design-assist and design-build delivery methods aligned subcontractors and designers early in the design stage to identify project risks and develop solutions for issues that would normally surface in the field on a traditional design-bid-build project,” said Chessmore. “This early collaborative team approach combined with the use of virtual design and construction technology and common team goals resulted in building efficiencies contributing to the project’s overall success.”

Construction technology used on the Torrance Memorial project included BIM 3-D project modeling aiding in clash detection and coordination of the extensive overhead and in-wall MEP systems, as well as seismic bracing and exterior skin systems.  The model was further leveraged to review upcoming work with the California Office of Statewide Health Planning and Development (OSHPD) inspectors, to coordinate logistics with facility management and to communicate the most cost efficient methods of implementing design changes with the owner and designers.

McCarthy also developed a custom Electronic Plan room that hosted the BIM 3-D Model, contract documents, RFI responses, submittal information, in-wall coordination elevation and Closeout Documents all hyperlinked to the building plans. This documentation was turned over to the hospital to assist with management of the building post construction.

The use of construction technology also aided in quality construction and ensured work was installed correctly the first time. For example, Trimble survey equipment loaded with coordinated design data was used to quickly, easily and accurately check work as it was being installed safeguarding compliance with construction tolerances and the coordinated model and eliminating rework due to human error.

“McCarthy’s self-performance of the structural concrete work further increased budget and schedule certainty by allowing for greater control through the first half of the project,” Chessmore explained.  “Aggressive schedule management, entailing daily schedule improvement reviews by our lead superintendent with project team support, was also a crucial strategy. This process ensured schedule advancement opportunities were constantly identified and captured, and ultimately the project was completed significantly ahead of schedule.”

Other project team members include: Pfeiler & Associates, Chino Hills, Calif., civil engineer; KPFF Consulting Engineers, Irvine, Calif., structural engineer; and TMAD Taylor & Gaines of Anaheim, Calif., MEP engineer. Major subcontractors involved in the design-assist process include: Capparelli/KHS&S, Anaheim, Calif., drywall; Control Air, La Palma, Calif., HVAC; Morrow Meadows, City of Industry, Calif., electrical and low voltage; Murray Company, Rancho Dominguez, Calif., mechanical piping & plumbing; and Herrick, Stockton, Calif., structural steel. 

About McCarthy Building Companies, Inc.

At McCarthy, we’re just getting started. For 150 years, McCarthy has been building communities across America, both by constructing essential projects communities rely on, as well as by helping those who need assistance. Knowing how to build from preconstruction through completion is a tradition that will continue as McCarthy endeavors to advance the value of its expertise and deliver the highest quality, job-site safety and ultimately, the best final project costs. McCarthy is ranked the largest health care builder in California (ENR California, July 2014).   In addition to Newport Beach, McCarthy has offices in San Diego, Corona, Sacramento, San Francisco and San Jose, Calif.; St. Louis, Atlanta; Collinsville, Ill.; Portage, Ind.; Kansas City, Kan.; Phoenix; Las Vegas; Dallas, Houston; and Albuquerque. McCarthy is 100 percent employee owned.

Related posts:

Tags: , ,

Category: Hospital

Leave a Reply

Your email address will not be published. Required fields are marked *


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

GRAPHISOFT: ARCHICAD download 30-day FREE trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy