Open side-bar Menu
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

BIM for University Hospital Building by Hi-Tech Outsourcing Services

February 4th, 2015 by Sumit Singhal

Article source: Hi-Tech Outsourcing Services

The team created information rich intelligent BIM with LOD 500, to support faster collaboration and enable the client to gain control over the project right from construction to facility management phase.

Image Courtesy © Hi-Tech Outsourcing Services

Image Courtesy © Hi-Tech Outsourcing Services

  • Architects: Hi-Tech Outsourcing Services
  • Project: BIM for University Hospital Building
  • Software used: 
    • Autodesk Revit Architecture 2013
    • Autodesk Revit Structure 2013
    • Autodesk Revit MEP 2013
    • Autodesk NavisWorks 2013

Image Courtesy © Hi-Tech Outsourcing Services

Image Courtesy © Hi-Tech Outsourcing Services

The Challenges: 
• The construction work had already started, BIM adoption at a later stage during the project was a challenge
• The turnaround time was another challenge, and detailed BIM had to be developed and delivered within very squeezed timeline
• Additionally, the team also had to understand and deliver BIM with Level of detail 500, adhering to AIA standards
• The building information model had to be developed to support the client right through the facility management phase, and details for all disciplines including MEP, architecture and structure had to be integrated.
• The project was taken up when the construction had already started and interdisciplinary clash detection and construction simulation along with material take off, scheduling etc was quite a challenge.

Image Courtesy © Hi-Tech Outsourcing Services

Image Courtesy © Hi-Tech Outsourcing Services

• A team of professionals with extensive experience of handling BIM projects and specialization across various disciplines was dedicated for the project
• Both on shore and offshore support was provided to enable faster collaboration and hence meet the set deadlines
• In addition to the BIM geometry, text documentation and as-built BIM information needed for O&M and FM purposes was also documented.
• All the interdisciplinary clashes were detected to allow clients mitigate risks and reduce rework.
• Accurate material takes offs and construction scheduling was provided, a comprehensive approach was followed to implement higher collaboration in the project.

• As the project delivery was on time and the most suitable to carry out construction flawlessly, the client – main contractor for this project, finished construction on time as per tender deadline and as desired
• Liabilities, risks due to clashes and hence rework during the construction phase reduced, in addition to reduction in wastage of materials, manpower and time. Hence client saved money on the project and thus enjoyed better ROI.

Related posts:

Categories: Building, University Building

Leave a Reply

Your email address will not be published. Required fields are marked *


Canon: oce crystalPoint
Bentley: Top 5 Reasons
AIA 2018 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise