Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

KAPKAR/ SF-P7S in Lent, Netherlands by Studio Frank Havermans

 
September 30th, 2016 by Sumit Singhal

Article source: Studio Frank Havermans

This pavilion KAPKAR.SF-P7S is designed and built for a temporary Building Lab (BOUWLAB) organised by Stichting Fabrikaat. This foundation, based in the city of Nijmegen in the east of the Netherlands is specialised in organizing temporary place making projects. This summer they erected a small settlement along the new shaped river bank on the north side of the city to focus on alternative ways of building and living in a more self organised way and show it to a broader public. This client asked me to design a low budget pavilion meant to program discussions, forums, meetings, small scale exhibitions, lectures and other cultural events during the period of BOUWLAB. Specific wishes were that the pavilion should have a striking appearance, be demountable and transportable to their future location, project ‘GRID” in Nijmegen, that it would provide space for 50 people, and that enough daylight would enter the building. Another wish was that I should collaborate with a MCT, a new company that developed a clever building system called KNØP.

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

  • Architects: Studio Frank Havermans
  • Project: KAPKAR/ SF-P7S
  • Location: Spiegelwaal, Nijmegen, Lent, Netherlands
  • Photography: René de Wit architectuurfotografie
  • Client: Stichting Fabrikaat Nijmegen
  • Basic Construction: KNØP building system, Mesh Construction Technology, Elst
  • Production: Studio Frank Havermans, Koos Schaart expeditions
  • Funds: Mondriaan Fund, Bouwfonds Cultuurfonds, Municipality of Nijmegen
  • Year: 2016

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

The site of BOUWLAB and the pavilion is on top of a new dike which has been thrown up for making a new river channel in Nijmegen in order to give the river ‘De Waal” more flow space if the water is high. For this massive infra structural intervention, a part of the Nijmegen-North has been demolished amongst it also old farmhouses.

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

The first clue for the design of the pavilion is a classic truss frame construction that held up the typical broad gable roofs formerly used in old farmhouses and sheds. In this design I re-introduce this kind of constructions in contemporary design. With the difference that the supporting structure is not only visible inside the building, but that it is also visible from the outside to create more awareness. For me wood frame constructions are one of the anchor points of the Dutch agricultural landscape. Too easily they are destroyed. This design emphasizes on this constructions. I placed the construction of the building to the outside of the building, even so that it spatial becomes part of  theroof and facades itself. In the interior the trusses are folded open and become interior spaces and places to sit for three people.

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

The main construction consists seven equal truss pillars, positioned parallel in three pairs. The seventh is turned 90 degrees and functions as a constructive ending. The base of the pavilion is a levelled floor on top the metal KNØP system. This system is not covered at the sides to emphasise in the beauty of this engineered construction method. The top of this base is covered with rough Douglas boards to provide a floor and side bench. The trusses are placed on the higher part. In the interior and outside this higher level is automatic used  as benches by the public. The ‘head’ of the building is all made of steel angels and corrugated steel sheets and gives access to the interior.

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

The whole construction is built in segments and can easily be taken apart en replaced. The roof and siding of the spaces between the trusses are made of metal and pvc corrugated sheets. A beautiful but simple and low budget material that slowly disappears from the landscape in the Netherlands. The pillars are treated with a new rubber coating.

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

By charging this construction with several elements from classic farmhouse typology in combination with simple low budget materials I created an experimental hybrid construction that emphasize the importance of farmhouses and sheds in our cultural landscape and that these buildings can be a constant inspiration to design contemporary architecture. This pavilion at the same time  is referring to the architectural heritage and also has futuristic appearance in the landscape.

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Image Courtesy © René de Wit architectuurfotografie

Related posts:

Tags: ,

Category: Pavilion

Leave a Reply

Your email address will not be published. Required fields are marked *


*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy