Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

CIELO MAR in Guanacaste, Península Papagayo by SARCO Architects Costa Rica

 
October 9th, 2016 by Sumit Singhal

Article source: SARCO Architects Costa Rica

The Cielo Mar residence is a collaboration project between NY-based firm Barnes Coy Architects, who created the original concept & design of the home, and SARCO Architects Costa Rica who performed the design development, final plans and construction management of the project.

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

The home is a three-story upside-down design, created on a bluff with a sharp slope at the end facing the ocean. The home appears from the road as a simple, one-story structure with a sloping and curving wall, and really hides the rest of the home dug into the hillside. The main level of the home is done in the middle level, where all social spaces, outdoor areas, master bedroom and pool are all located. In the lower level the home houses additional guest rooms, a gym and a media room.

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

The shape of the home was inspired on a bow-and-arrow idea, with a concentric shape housing the main social area, and some bedrooms on the opposite end, which represent the bow. The arrow is represented by an entrance canopy that continues outward as a cantilevered steel bridge over the swimming pool.

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

The bridge became the central element of the outdoor space, under which was created a space for outdoor dining, used by the family and guests throughout the year except when it rains. The bridge also provided the structure from which to attach retractable shading, created by the use of boat sails full with sailing hardware to retract the sails in and out. When furled up, the sails are neatly tucked away in their rollers attached to the underside of the bridge.

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

The exteriors of the home are modern, natural and muted at the same time, with accents of color in the exposed steel structural elements. Extensive deck areas are done in natural Ipé wood from Brazil, with the swimming pool was finished in volcanic stone. Exterior volumes are comprised of either glass curtain walls done in wood-framed window system, the kitchen & bar box clad in Porcelain tiles to replicate cor-ten steel, and the “Bento Box” at the other end clad in Ipé wood siding. All exterior railings are custom-fabrication 316 Stainless Steel with stainless braided wire for horizontals.

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

This home was a massive construction and engineering undertaking done by SARCO Architects in many aspects. The swimming pool, for example is of varying depth with 9ft. depth at the deepest end, and still this is elevated around 7ft. off the ground. The structural anchoring of the pool to prevent from failure during earthquakes included 3 massive 10X10X10ft reinforced concrete anchors dug into the rock hillside, with reinforced concrete beams attaching the anchors to the pool’s floor structure. The engineering ingenuity and safety measures were all in good measure, as in late 2012 the home went through a 7.6-Richter Scale earthquake whose epicenter was around 60 miles away from the home, with no damages.

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

The steel bridge was manufactured off-site in two sections and trucked to the site to be hoisted in place by two cranes and welded on site to the inverted-A steel support. The bridge cantilevers a total of 29ft from this point, aided by 1-inch thick solid stainless-steel bar tensioners to both sides of the support.

The entire home was fitted with first-generation LED lighting, design led by NY-based Gary Novasel at PATDO Light Studio. At the time this was the first full LED-equipped home in Costa Rica.

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Image Courtesy © SARCO Architects Costa Rica

Related posts:

Tags: ,

Categories: House, Residential

One Response to “CIELO MAR in Guanacaste, Península Papagayo by SARCO Architects Costa Rica”

  1. JOSEMAR ROCHA says:

    Very very Nice!!
    Congratulations .
    Josemar Rocha

Leave a Reply

Your email address will not be published. Required fields are marked *


*

Graphisoft ARCHICAD  Download a 30-Day FREE trial
Canon
Bentley:Microstation License
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy