Open side-bar Menu

Archive for the ‘3dS Max’ Category

Centro de Atención Integral a la Niño, Cariño El Remanso in Colombia by EMS Arquitectura

Friday, July 27th, 2012

Article source: EMS Arquitectura

This is the first of 3 buildings projected for the “CARIÑO” institutional program, driven by social manager of Santiago de Cali and the Ministry of Education. It is located in the district 21, east of the city, adjacent to the Cauca River dam, on a lot that for years had been used by the community as a park, but legally would be destined for the construction of an educational institution. The development of the project would generate a new form of living space whereas their new occupants would be children between 2 and 5 years.

Image Courtesy EMS Arquitectura

  • Architects: EMS Arquitectura
  • Project: Centro de Atención Integral a la Niño, Cariño El Remanso
  • Location: Colombia
  • Software used: AutoCAD 2010, 3Dmax, V-Ray


Private house at Reguengos in Alentejo, Portugal by Henrique Barros-Gomes

Friday, July 20th, 2012

Article source: Henrique Barros-Gomes

With a contemporary and minimalist approach, this exposed concrete weekend house is to be located in a rural area in upstate Reguengos de Monsaraz, Alentejo, Portugal.

The site is a clearing with dense wooded surroundings. The house has large glazed surfaces, increasing the interior exterior relation. Wooden sliding louvres, recessed in the walls, provide shade from the sun and protection from intruders. Roof slabs extend to the exterior, shading the glazed panels.

Private house at Reguengos

  • Architects: Henrique Barros-Gomes
  • Project: Private house at Reguengos
  • Location: Alentejo, Portugal
  • Software used: Autocad (for 2D), modeled and rendered with 3DSmax/mentalray and post-produced with Photoshop


Sethai Villa in Koh Samui, Thailand by Bodin Sritrakul

Thursday, July 19th, 2012

Article source: Bodin Sritrakul

The Sethai Villa has been built up the mountain and overlooking to Chaweng Bay with a panoramic sea view.

The Thai modern style villa has four bedroom, a living room with open sea view, and a swimming pool that measures sixty square-meters. Thedesign is structured out of concrete, while the finishing is of the minimal tropical style. The floor in the living room is polish, ceramic tile for the bedroom floor, and the decking and walkway is sand wash.

Sethai Villa


Manta Reactive Acoustic Surface by ARCHGEOMETER

Thursday, July 19th, 2012

Article source: ARCHGEOMETER

Manta is a surface that changes  form – and therefore acoustic character – in response to multimodal input through Open Sound Control [OSC], including stereoscopic vision, multi-touch, sound, and brainwaves. While adaptable acoustic treatments are common, Manta explores variability and responsiveness in the surface itself, advancing acoustic systems beyond individual elements and corrective treatment.

Image Courtesy © M. Leo Villardi

  • Architects: ARCHGEOMETER
  • Project: Manta Reactive Acoustic Surface
  • Project Architect: Zackery Belanger, Guillermo Bernal, Seth Edwards, Eric Ameres
  • Smartgeometry collaborators: Olia Fomina, Frederico Fialho, Daniel Hambleton, Christoffer Marsvik, Ana Garcia Puyol,  Varvara Toulkeridou, Ben Schneiderman, Sarah Goldfarb, James Wisniewski
  • Photography: M. Leo Villardi
  • Supported in part by: Smartgeometry, EMPAC, Grimshaw Architects
  • Software used: Many software programs, but mainly Rhinoceros and Max/MSP


Kazan Yandex Office in Russia by Za Bor Architects

Tuesday, July 17th, 2012

Article source: Za Bor Architects

Representative office of the largest Russian IT-company, Yandex in Kazan, is situated on the 16th floor of «Suvar Plaza» business center. With the area of 647 sq.m. it has only 41 working place. The office plan reminds a trapezium, while the midline of a trapezium is a corridor, leading from the main entrance to the fire exit.

Image Courtesy Peter Zaytsev

  • Architects: Za Bor Architects
  • Project: Kazan Yandex Office
  • Location: Business center «Suvar Plaza», 6th Spartakovskaya str, Kazan, Russia
  • Architects: Arseniy Borisenko and Peter Zaytsev
  • Decor: Nadezhda Rozhanskaya
  • Floor area: 674 sqm
  • Date of project: 10.2010 – 12. 2010
  • Date of construction: 10.2011 – 03.2012.
  • Photographer: Peter Zaytsev
  • Software used: ArchiCAD and 3D Studio Max


Water Purifying Footbridge in The Netherlands by Margot Krasojevic

Saturday, July 14th, 2012

Article source: Decodeine

Competition Amsterdam footbridge 2012 by Margot Krasojevic
Water management is still the most important function of Amsterdam canals. Without them, the city would drown. Circulating the water is also vital for sanitary reasons. In the days when windmills had to do the job, the stench of the water could become unbearable in periods with little wind or rain.

Three times a week, 14 of the 16 existing waterlocks around the city close up, so clean water can be pumped in from the big lake IJsselmeer. The current that is created pushes the dirty canal water out through the open locks on the other side of the city. Specialized cleaning boats with big scoops and nets patrol frequently clean surface debris. Since 2005, all the houseboats in the city are connected to the sewer system.

Water Purifying Footbridge

  • Architects: Decodeine
  • Project: Water Purifying Footbridge
  • Location: Amsterdam,  The Netherlands
  • Project Architect: Margot Krasojevic
  • Software used: 3dsMax and Vray for renders and Microstation for design details


Nicolas de Rivera Building in San Isidro District, Peru by Vértice Arquitectos

Friday, July 13th, 2012

Article source: Vértice Arquitectos

The Project consists of five floors and a parking in the basement, with a total of 7 apartments in there, divided in 4 flats and 3 duplex with views to the main avenue.

The entrance to the building is through the reception area, where the waiting room, principal ladders, elevators, and the basement access.

Nicolas de Rivera Building

  • Architects: Vértice Arquitectos
  • Project: Nicolas de Rivera Building
  • Location: San Isidro District, Peru
  • Software used: The building was designed initially by hand, then the development was in CAD software and some 3d visualization software. AutoCAD and 3dMax.


Vince Camuto in Manhattan, New York by Sergio Mannino Studio

Tuesday, July 10th, 2012

Article source: Sergio Mannino Studio

The Vince Camuto Grand Central Terminal Store in Manhattan is the result of continued creative collaborations between New York-based Italian architect Sergio Mannino and Vince Camuto, founder and CEO of the Camuto Group. Mannino, who has worked on the Vince Camuto showroom and outlet store, wanted to highlight merchandise in this new Midtown store while incorporating soft, crisp, and warm elements into the design throughout.

Vince Camuto

  • Architects: Sergio Mannino Studio
  • Project: The Vince Camuto Grand Central Terminal Store
  • Location: Manhattan, New York
  • Design: Sergio Mannino Studio (Sergio Mannino, Francesca Scalettaris)
  • Software used: Autocad, 3ds Max and Vray


Cobogó House in São Paulo, Brazil by Studio mk27

Sunday, July 8th, 2012

Article source: Studio mk27

The light of the abundant tropical Sun falls on the white volume of the top floor of the house, penetrating the holes of the hollowed elements and covering the floor of the interior space. Thus, the design of spatialized lace is formed from the shadows and solar rays. The effect is multiplied throughout the ambient, making a construction from the light itself. Throughout the days, throughout the months, the hollowed-out elements take on different forms with the incidence of the sun; at night, this effect once again is transformed; in a continuous process of metamorphosis, its form changes from the light.

Image Courtesy Nelson Kon

  • Architects: Studio mk27
  • Project: Cobogó House
  • Location: São Paulo, Brazil
  • Project Date: January . 2008
  • Completion: May . 2011
  • Site Area: 1365 Sqm
  • Built Area: 1000 Sqm
  • Architect: Marcio Kogan
  • Co-Architect: Carolina Castroviejo
  • Software used: AutoCAD, Vectorworks and 3D max


Inside Fashion Store in Vienna, Austria by Söhne & Partner Architects

Sunday, July 8th, 2012

Article source: Söhne & Partner Architects

A 100m² shop presents fashion in a discreet but appealing way.

It was the designer’s intention to create a restrained and straight room in order to make it an eye-catcher for the Neubaugasse in Vienna. Thus, people who are passing by should be guided into the store. The colour turquoise directs the customers through the shop while the interior is mainly white and sober in order to present the fashion at the best. Big mirror surfaces make the room seemingly bigger.

Image Courtesy Severin Wurnig

  • Architects: Söhne & Partner Architects
  • Project: Inside Fashion Store
  • Location: Vienna, Austria
  • Photography: Severin Wurnig
  • Software used: Autocad LT for all the drawings, 3d models using 3ds max, proman for tendering


GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy