Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

G House in Reeuwijk, The Netherlands by Lab32 architecten

Friday, December 8th, 2017

Article source: Lab32 architecten

The villa is situated close to the waters of the Reeuwijkse Plassen in a dutch village consisting of not much more than a narrow through road lined predominantly by large, free-standing houses standing on ‘islands’ created by the drainage ditches of the former peatland.

The great attraction of this location lies in the vicinity of water and in the experience of this natural environment through the changing seasons. The villa’s completion represents the fulfilment of a long-held ambition of our clients, for whom a love of water has been an abiding theme of their lives.

Image Courtesy © Rene de Wit

  • Architects: Lab32 architecten
  • Project: G House
  • Location: Reeuwijk, The Netherlands
  • Photography: Rene de Wit
  • Software used: Autocad, Autodesk, Revit, Photoshop
  • Floor area: 650 m2
  • Start: 2012
  • Finished: 2015

(more…)

Narrow House in London, England by FORMstudio

Thursday, December 7th, 2017

Article source: FORMstudio

The narrow deep plan of this tall terraced late 19th century building was ill-suited to its previous use as offices, with escape distances pre-determining the necessity for the centrally located lift and stair core that sub-divided the floor plate into small inflexible work spaces.

This configuration was, we recognised, ideally suited to the creation of residential space though, with naturally-lit rooms of domestic scale located to the front and rear, and support spaces located inboard around the retained central stairs and lift. A use further suggested by the domestic style of the Dutch-gabled brick front elevation.

Image Courtesy © BruceHemming

  • Architects: FORMstudio
  • Project: Narrow House
  • Location: London, England
  • Photography: BruceHemming
  • Software used: Autocad, SketchUp

(more…)

The hybrid house in Rome, Italy by ERA – Enrico Realacci Architectures

Wednesday, December 6th, 2017

Article source: ERA – Enrico Realacci Architectures

A building dating back to 1905, near the historical Villa Torlonia in Rome.

Generous spaces and volumes, a classical layout, a large corridor with arches and a large salon.

Everything could stay that way, just a technological plants upgrade and new finishes were needed.

Image Courtesy © Archive E.R.A.

  • Architects: ERA – Enrico Realacci Architectures
  • Project: The hybrid house
  • Location: Rome, Italy
  • Photography: Archive E.R.A.
  • Software used: Autocad
  • Lighting design: E.R.A.
  • Area: 300 ㎡
  • Completion Year: 2016

(more…)

BLACK BOX II in Montreal, Canada by Natalie Dionne Architecture

Tuesday, December 5th, 2017

Article source: v2com 

BLACK BOX II is the latest in a series of tiny additions impacting existing architecture in a big way. Conceived as a jewelry box, large openings blur the interior/exterior boundary, revealing its treasure of fine cabinetmaking work within through the playful use of complementary surface materials.

Image Courtesy © Raphaël Thibodeau

  • Architects: Natalie Dionne Architecture
  • Project: BLACK BOX II
  • Location: Borough Côte-des-Neiges–Notre-Dame-de-Grâce, Montreal, QC, Canada
  • Photography: Raphaël Thibodeau
  • Software used: Autocad, SketchUp
  • Design team: Natalie Dionne, Martin Laneuville, Ariane Côté-Bélisle, Corinne Deleers.
  • Collaborators:
    • Contractor: Pierre Aubin
    • Engineer: Aldrin Salpunariu
    • Cabinet Maker: Pixel&scie
  • Area of project: 2 130 ft2/198 m2
  • Addition: 180 ft2/17 m2
  • Project end date: Fall 2017

(more…)

Pamp.Pavilion in Belo Horizonte, Brazil by Joao Diniz Arquitetura

Tuesday, December 5th, 2017

Article source: Joao Diniz Arquitetura

This small pavilion functions as a doorway to the design and architecture exhibition ‘Casa Cor MG 2015’ in Belo Horizonte, where ‘Brazilianity’ was the proposed theme.

‘Mineral Essence’ was the concept adopted where the rusted steel, a material that refers directly to the state of Minas Gerais’ siderurgyc activities, is used how it is provided bt the industry, on metal strips that defined the project the continuos plan conforming the surfaces of the floor, wall and ceiling.

Image Courtesy © Bel Diniz

  • Architects: Joao Diniz Arquitetura
  • Project: Pamp.Pavilion
  • Location: Belo Horizonte, Brazil
  • Photography: Bel Diniz
  • Software used: Autocad, SketchUp, Photoshop
  • Accero Team: Fabio Adriano Pereira da Silva (coord.), Fábio Adriano Santos Silva, Tiago Matos, Alvaro Soares
  • Constructed Area: 45,00 m2

(more…)

The Paper Pavilion – Radical Retail in Singapore by Larry Teo

Friday, November 24th, 2017

Article source: Larry Teo

The Paper Pavilion” – an experimental, recyclable furniture showroom concept involving the use of recyclable materials and novel technologies by student designer Larry Teo of Singapore’s Temasek Polytechnic has been selected as one of the winners of the American Architecture Prize 2017 under the Architectural Design/Small Architecture category.

A 25,000 optical glass brick facade replaces the existing cement brick walls of the warehouse, baring its structure and allowing for internal activities to be brought to the public, Image Courtesy © Larry Teo

  • Architects: Larry Teo
  • Project: The Paper Pavilion – Radical Retail
  • Location: Singapore
  • Software used: Autocad, 3dS Max

(more…)

Surfboard House in Queens, New York by BFDO Architects

Thursday, November 23rd, 2017

Article source: v2com

Five years after Hurricane Sandy devastated the cooperative beachfront community of Breezy Point, Queens, the project built upon a lot that had been reduced to sand is complete. Houses in Breezy Point are set close together and linked by pedestrian paths; cars are confined to lots at the periphery. The client’s site was unusually wide, with 68 feet of south-facing beach frontage. Flood regulations required building at least six feet off of the ground, while co-op regulations put the maximum building height at 28 feet. The co-op also required a setback from the lot line of 32 feet at the lot’s widest point. The resulting building envelope was much shallower than wide, allowing nearly every room to have an ocean view. One of the primary design strategies was stepping the south-facing facade to allow windows to wrap corners. That created diagonal sightlines up and down the beach, framing vistas and visually expanding the interior spaces. Angled roof profiles and ceiling finishes also direct the eye upward and outward.

Image Courtesy © Francis Dzikowski/OTTO

  • Architects: BFDO Architects
  • Project: Surfboard House 
  • Location: Queens, New York
  • Photography: Francis Dzikowski/OTTO
  • Software used: Rhino, Autocad

(more…)

Catalinas Houses in Córdoba, Argentina by Orange Obras Civiles

Wednesday, November 22nd, 2017

Article source: Orange Obras Civiles

“Casas Catalinas” are family homes located in Rio Ceballos, along the Córdoba mountain range and away from the city. They set up in 5000 square-foot lands.

The project seeks to provide home solutions to middle class young families that have access to social loans provided by the state. These 1185 square-foot houses have a limited budget and the main guidelines have to do with lively rooms, austere and detail less design, reducing construction costs.

Image Courtesy © Gonzalo Viramonte

  • Architects: Orange Obras Civiles
  • Project: Catalinas Houses
  • Location: Córdoba, Argentina
  • Photography: Gonzalo Viramonte
  • Software used: Autocad, SketchUp, V-Ray
  • Constructed area: 110 (m2)
  • Year: 2016-2017

(more…)

Private Resort XIV Toba Bettei in Tsu-shi, Japan by NIKKEN SPACE DESIGN LTD

Sunday, November 19th, 2017

Article source: v2com

These guest rooms were designed as part of an annex to a membership resort hotel in Toba in Ise-Shima, where the 2016 G7 Summit was held. Arranged in an authentic Japanese style, the building is situated in a prime location overlooking the waters of Ise-Shima, with a traditional Japanese-style garden and a large pond that lends an impression of continuity to the sea. The interior was designed in a basic Japanese style that pursues new and modern expressions.

XIV Toba Bettei Guestroom-Type-S-01, Image Courtesy © Nacása & Partners Inc.

  • Architects: NIKKEN SPACE DESIGN LTD
  • Project: Private Resort XIV Toba Bettei
  • Location: 212-8, Azanie, Arashima, Toba City, Mie, Japan, 517-0021
  • Photography: Nacása & Partners Inc.
  • Software used: Autocad
  • Interior design: NIKKEN SPACE DESIGN LTD, Takeshi NAKANO・Nobuko SUZUKI・Masami SAWAMURA
  • Client: Resorttrust, Inc.
  • Surface: 8,722.41㎡
  • Completion date: 27/3/2016

(more…)

Perles et Paddock restaurant in Montréal, Canada by Clairoux

Sunday, November 19th, 2017

Article source: v2com 

Perles et Paddock is a restaurant whose interior design was brought to life by a designer, an architect and a restaurateur working in close collaboration. Clairoux’s team supplied an authentic design experience inspired by the neighbourhood’s history and tailored to the restaurant’s philosophy.

interior design restaurant decoration by Clairoux, high end interior designers commercial and residential part of Frédric Clairoux’s team in collaboration with Maxime Martel architect, Image Courtesy © atelier welldone

  • Architects: Clairoux
  • Project: Perles et Paddock restaurant
  • Location: Montreal, Quebec, Canada
  • Photography: Atelier welldone
  • Software used: Autocad
  • Interior design: FX Studio design
  • Construction: September 2016 to June 2017
    (more…)
GRAPHISOFT: ARCHICAD download 30-day FREE trial
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise