Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Gateway – Deloitte HQ in Brussels, Belgium by JASPERS-EYERS ARCHITECTS

Tuesday, April 24th, 2018

Article source: JASPERS-EYERS ARCHITECTS 

As one of the world leaders in financial and business services, Deloitte is also a trailblazer when it comes to innovative, contemporary working culture. It’s no wonder, then, that their new building at the Brussels Airport site in Zaventem would become a reflection of what the company stands for.  It’s an international melting pot, where work and leisure go hand in hand and where flexibility, communication and versatility are key words.

Jaspers-Eyers Architects, which has extensive experience in designing contemporary work environments, took up the challenge for developers Codic and Immobel. The challenge was to transform abstract concepts into tangible architecture that is firmly grounded in the present and future. Architecture with respect for the existing complex, which is partially renovated. The result is both sober and imposing, a modern giant with one eye on the landing strip and the other on Zaventem.

Image Courtesy © Jeroen Verrecht

  • Architects: JASPERS-EYERS ARCHITECTS (A2RC)
  • Project: Gateway – Deloitte HQ
  • Location: Brussels, Belgium
  • Photography: Jeroen Verrecht, Steven Massart, Tom D’haenens, Philippe Van Gelooven
  • Software used: ArchiCAD, Autocad, 3DS studio, Photoshop
  • Client: CODIC & IMMOBEL
  • Engineering: Technum
  • Budget: € 50 000 000
  • Area: 46,000m²
  • Time Table: 2011-2018

(more…)

Tucumán Building in Santa Fe, Argentina by Garnerone + Ramos

Friday, April 20th, 2018

Article source: Garnerone + Ramos 

“Tucumán 2615 Building” is located within Pichincha District —four blocks from Oroño Boulevard and five blocks from Paraná River waterfront. Built on a 10 m x 17.5 m plot, this building is 13 m tall, the maximum height permitted as per Rosario’s Urban Code. This was established for the area delimited by a special plan devised for Pichincha District, “Plan Especial Barrio Pichincha”, which applies to the majority of the blocks in the area.

Image Courtesy © Walter Salcedo

  • Architects: Garnerone + Ramos
  • Project: Tucumán Building
  • Location: Rosario, Santa Fe, Argentina
  • Photography: Walter Salcedo
  • Software used: Autocad
  • Main Contractor: M.E.F
  • Collaborators: Fidela Antelo, Ignacio Degani, Mauricio Bartocci
  • Architects in charge: Garnerone Nicolás, Ramos Martín
  • Structure Calculation: Eduardo García
  • Area: 500 m2
  • Project Year: 2015

(more…)

House MV in Paine, Chile by CRISTIAN ALVARADO ESPINOZA

Friday, April 20th, 2018

Article source: CRISTIAN ALVARADO ESPINOZA

A Break on the hill

The order is a second home for a family on the slopes of a hill located in the southern sector of Laguna Aculeo, Paine.

The conditions of the terrain with an angle of 30 degrees create the following problem: How, in addition to accommodating the traditional program, is the family reunion generated and possible?

Image Courtesy © CRISTIAN ALVARADO ESPINOZA

  • Architects: CRISTIAN ALVARADO ESPINOZA
  • Project: House MV
  • Location: PiedraMolino, Rangue, Laguna De Aculeo, Paine ,Chile
  • Software used: SketchUp, Autocad and Artlantis
  • Collaborators: 
    • Construtión: Sergio Contreras
    • Estructural Proyect: Pablo Romero
    • Interior and Kitchen Design: OhDa Diseño, Carla Valenzuela
  • Square Meters: 230 m2
  • Year: 2017

(more…)

Villa Poorkan in Chalous Road, Iran by ZAV Architects

Friday, April 13th, 2018

Article source: ZAV Architects

The Poorkan villa used to be an abounded building. Our clients (Mojdeh Ghodousi and Ali Kamran) decided to build a villa on their inherited land. Instead we encouraged the proposition of renovating the existing building on the on.

We intended to recycle the space, in order to bring it back to the cycle of useful, contemporary spaces.

Image Courtesy © Soroush Majidi

  • Architects: ZAV Architects
  • Project: Villa Poorkan
  • Location: Kalna – Chalous Road, Iran
  • Photography: Parham Taghiof (photo agency), Soroush Majidi
  • Software used: Autodesk, Autocad, Photoshop, SketchUp
  • Lead Architects: Mohamadreza Ghodousi
  • Site Area: 917sqm
  • Completion Year: 2015

(more…)

Brunswick House in Australia by Chan Architecture

Wednesday, April 11th, 2018

Article source: Chan Architecture

Renovating a semi-detached, single fronted Edwardian terrace house always poses a unique set of challenges.  The sites are often long and narrow with a shared party wall on one side and an existing house which can be over 100 years old.  The main challenge is always how to create modern, flexible, light-filled spaces with limited site access and a tight budget.

Image Courtesy © Tatjana Plitt

  • Architects: Chan Architecture
  • Project: Brunswick House
  • Location: Brunswick, Melbourne, Australia
  • Photography: Tatjana Plitt
  • Software used: Autocad, SketchUp
  • Project Team: Anthony Chan, Meyvin Puspita
  • Structural Engineer: Greer Consulting Engineers
  • Building Surveyor: Wilsmore Nelson Group
  • Completed: 2017

(more…)

House interior in Richmond, London by Roselind Wilson Design

Wednesday, April 11th, 2018

Article source: Roselind Wilson Design

All the rooms started as a blank canvas and careful consideration was given to the architectural style of the property. On the upper floor, the house has a chic modern bathroom, a study and several bedrooms. The design of the children’s rooms incorporates their favourite colours, and hints at their hobbies and interests. Both rooms include brilliant bespoke storage furniture.

Image Courtesy © Richard Waite

  • Architects: Roselind Wilson Design
  • Project: House interior
  • Location: Richmond, United Kingdom
  • Photography: Richard Waite
  • Software used: Autocad, SketchUp, Photoshop
  • Area: 5,500 square foot

(more…)

Pompejus in Halsteren, The Netherlands by RO & AD Architecten

Tuesday, April 10th, 2018

Article source: RO & AD Architecten 

Pompejus is a watchtower on Fort de Roovere in Halsteren, West Brabant. The tower looks out over the West Brabant Water Defence Line, the oldest part of the Zuiderwaterlinie running from Bergen op Zoom to Grave. Pompejus is a watchtower, an open-air theatre and an information point for tourists. Pompejus is named after the first commander of the fortress, Pompejus de Roovere.

Image Courtesy © Katja Effting

  • Architects: RO & AD Architecten (Bergen op Zoom)
  • Project: Pompejus
  • Location: Halsteren, The Netherlands
  • Photography: Katja Effting
  • Software used: Autocad, Rhinoceros, TEKLA
  • Design Team: Ad Kil, Ro Koster and Martin van Overveld
  • Commissioner: Municipality of Bergen op Zoom / Municipality Bergen op Zoom
  • Constructeur / Structural Engineer: Adviesbureau Luning, Velp
  • Contractors: Berghbouw, De Kok Bouwgroep, Nijs Soffers, VKP
  • Start-End Construction: 02-2017, 12-2017
  • Height: 26 meters

(more…)

Open House in Bangkok, Thailand by Klein Dytham architecture

Thursday, April 5th, 2018

Article source: Klein Dytham architecture

Open House is located in the Central Embassy complex 50m above Bangkok. Within this vast 4,600sqm double-height interior, a village of spaces has been created, each with a familiar human scale –  restaurants, lounges, bars, galleries, stores, pop-ups, libraries and workspaces that all seamlessly fit together. A space that anyone can feel comfortable in, feel at home in, spend all day in, relax in and be inspired in. A place to hang out, a place to play, a place to catch up on work and a place to eat and drink.

Image Courtesy © Klein Dytham architecture

  • Architects: Klein Dytham architecture
  • Project: Open House
  • Location: Bangkok, Thailand
  • Software used: Autocad, SketchUp
  • Client: Central Embassy Hotel Ltd
  • Local Architect: Design M&A Co, Ltd
  • Lighting Designer: Inverse Lighting Design
  • Landscape Designer: P landscape Co, Ltd
  • Structural Engineer: PSAA Consulting Engineers Co Ltd
  • Mech. & Elec. Engineer: MITR technical consultant co, Ltd
  • General Contractor: Asa Furdec Co, Ltd
  • Total Floor Area: 4,600 sqm
  • Design Period: Oct 2015 – Feb 2017
  • Construction Period: Sept 2016 – Apr 2017

(more…)

A Two-Family House OGLE in Riga, Latvia by NRJA

Wednesday, April 4th, 2018

Article source: NRJA

Two separate apartments for two families make up the volume which complies with the strict regulations of Riga historical center. The height of the volume corresponds to the buildings across the street; the varying slopes of the roof react to the geometry of the nearby roofscape. The materials used for facades – black brick, painted timber boards and Rheinzink tin sheets – respond to the surrounding context of historical buildings. The tonality of used materials corresponds symbolically to the location – Ogļu (from latvian – Coal) Street.

Image Courtesy © Gatis Rozenfelds and Zigmārs Jauja

  • Architects: NRJA
  • Project: A Two-Family House OGLE
  • Location: Riga, Latvia
  • Photography: Gatis Rozenfelds – Zigmārs Jauja
  • Software used: Autocad, SketchUp
  • Lead Architects: Uldis Lukševics, Ivars Veinbergs, Zigmārs Jauja, Linda Leitāne-Šmīdberga
  • Area: 400.0 m2
  • Project Year: 2017

(more…)

Habitat for Orphan Girls, in Khvansar, Iran by ZAV ARCHITECTS

Tuesday, April 3rd, 2018

Article source: ZAV ARCHITECTS

Habitat for orphan girls

The habitat for foundling girls is located in the historical fabric of Khansar, a small town in the heart of Iran. Before evolving into a residence for orphan girls, our charitable client had intentions of building a public clinic. We came up with a proposal of a welfare institution since the site’s location could eventually come to help its future deprived users. The orphans can find shelter under the protection of history: they will be surrounded by three of the city’s historical monuments that could serve as parents.

Image Courtesy © Soroush Majidi

  • Architects: ZAV ARCHITECTS
  • Project: Habitat for Orphan Girls
  • Location: Rayisan Kouy, 22 Bahman st., Khansar, Iran
  • Photography: Soroush Majidi, Aidin Gilandoost, Fateme Rezaie Fakhr-e-Astane
  • Software used: Autocad, SketchUp, Photoshop
  • Client: The Late Ahmad Maleki, Parvin Maleki
  • Design Team: Mahshid Gharibi, Seyed Hossein Hejrati, Golnaz Bahrami, Sara Jafari
  • Civil Engineer: Nader Shokoufi
  • Electrical and Mechanical Engineer: Ali Ghanizadeh
  • Graphic: Golnaz Bahrami

(more…)

Canon: oce crystalPoint
Bentley: -YII 2018 Awards
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise