Open side-bar Menu

Archive for the ‘Autocad’ Category

Vijitha & Lalith Lokuge House in Sri Lanka by Channa Horombuwa

Thursday, July 5th, 2012

Article source:  Channa Horombuwa

This three storied, seven bedroom house, owned by Vijitha & Lalith Lokuge sits on a 23 perch land facing Abeyratne Mawatha in Boralesgamuwa. The owner being very fond of adopting modern technology into his day to day activities wanted the Architect to design a spacious, modern house to capture lot of day light into its interior.

Image Courtesy Channa Horombuwa

  • Architects: Channa Horombuwa
  • Project: Vijitha & Lalith Lokuge House
  • Location: Sri Lanka
  • Software used: AutoCAD



V4 House in Sao Paulo, Brazil by Studio mk27

Tuesday, July 3rd, 2012

Article source: Studio mk27

With each new project contemporary architecture is forced to optimize spaces and use the maximum of each square meter of the site.  V4 House is a rare anti-example.   Its occupation of the land is very far from the maximum coefficient.  Laws allow for much larger constructions. The solution adopted, however, dialogues with the dimension of the site, formulating an adequate relation between the scale of the construction and the site.

Image Courtesy Nelson Kon

  • Architects: Studio mk27
  • Project: V4 House
  • Location: São paulo . sp . Brazil
  • Project Date: April . 2009
  • Completion:  October . 2011
  • Site area: 653,00 sqm
  • Built area: 1.291,00 sqm
  • Software used: AutoCAD, Vectorworks and 3D max (besides other image editing softwares)


Villa Hendrikx in Almere-Haven, The Netherlands by 70F Architecture

Sunday, July 1st, 2012

Article source: 70F Architecture

The commission (September 2007) consisted of a detached house on a plot in residential area Overgooi in Almere, at the foot of the Gooimeer dike. The family wanted, except for transparency and privacy, a strong integration of the plot with the building as opposed to a block on a mound. The house is a two-story building with traditional planning, living on the ground floor and sleeping upstairs. The building is divided into three parts: a two-storey main entrance building facing the front garden, a patio and connecting hallway as an open area in between, and finally the living area in a one-story volume in the middle of the plot.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Villa Hendrikx
  • Location: Ludenbos 9, 1358 EL Almere, The Netherlands
  • Client: the Hendrikx family
  • Project architect: Carina Nilsson
  • Project leader: Bas ten Brinke
  • Engineer: van Rossum Almere
  • Contractor: REKO Uelsen (D)
  • Photographer: Luuk Kramer
  • Completed: September 2009
  • Software used: mix of Autocad/3D studio and Vectorworks


Skellefteå Kraft in Sweden by General Architecture

Sunday, July 1st, 2012

Article source: General Architecture

Local power production company, Skelleftea Kraft have a new headquarters building adjacent to their existing office building in the northern town of Skelleftea.

The strong structure and the articulated tectonic of the new building is based on an overall 3D order and relates to a classical rational tradition.  The aim has been to create a building that enables its users to appropriate it and at the same time strengthen the common identity.

Image Courtesy Åke E:son Lindmans

  • Architects: General Architecture
  • Project: Skellefteå Kraft
  • Location: Kanalgatan 71 , Skellefteå, Sweden
  • Function: Office building
  • Project start: 2006
  • Completion: 2009
  • Floor area/size: 9500 m2
  • Software used: AutoCAD


Rosa F. Keller Library & Community Center in New Orleans, Louisiana by Eskew+Dumez+Ripple

Sunday, July 1st, 2012

Article source: Eskew+Dumez+Ripple

This New Orleans neighborhood library is comprised of two buildings joined together with the intention that they function as a whole. One building is a historically significant bungalow built as a residence in 1917, sited prominently on the corner of South Broad Street and Napoleon Avenue. The other building, built in 1993 specifically to function as a library, was home to the main reading room and stock areas. Both buildings were severely flooded by levee breaks attributed to Hurricane Katrina. The bungalow was salvaged and raised for future flood prevention, but the modern addition was deemed necessary for replacement by the Federal Emergency Management Administration (FEMA).

Image Courtesy Timothy Hursley

  • Architects: Eskew+Dumez+Ripple
  • Project: Rosa F. Keller Library & Community Center
  • Location: New Orleans, Louisiana
  • Software used: majority of the design work done in AutoCAD and Sketch up. Some Rhino was used on the tail end of the project.


Abitare il sottotetto in Milan, Italy by Studio Arcadia Ego

Friday, June 29th, 2012

Article source: Studio Arcadia Ego

The design solution for the apartment started from the need to modify the original project that included the execution of a partition wall in front of the entrance; this wall delimited the area deputed to food preparation closed by sliding glass doors and furniture provided with angular. This solution, however, prevented a rational distribution of the residence, having an area of 30 square meters, could contain only a small table and a sofa. The project, planned to greatly reduce the wall of the kitchen until it becomes a shoulder retaining wall system of open living space which becomes a distinctive design element.

View of the dining area from the entrance of the apartment

  • Architects: Studio Arcadia Ego
  • Project: Abitare il sottotetto
  • Location: Milan, Italy
  • Software used: AutoCAD LT 2012 for 2D drawings, Sketch-up for 3D and Artlantis for renderings. The perspective is a handmade drawing  done by the architect.


Casa Mas by Rizoma Architetture

Thursday, June 28th, 2012

Article source: Rizoma Architetture

The design for the detached house CASA MAS has been designed with the aim of creating a state of great comfort at very high energy efficiency. The building includes a basement concrete open to a small patio and two floors made entirely of wood. The panels in X-LAM structure of the company ProholzEmilia, the external insulation, ceilings, roofing and finish are all designed in wood, this, combined with the plant design ensures a minimum standard of Class A, extended to Class A + with the completion of the PV system from 5 kWh.

Casa Mas

  • Architects: Rizoma Architetture
  • Project: Casa Mas
  • Software used: AutoCad, Rhinoceros and Cinema 4D


N.O.W. Green Icon by Rizoma Architetture

Thursday, June 28th, 2012

Article source: Rizoma Architetture

NOW (NO WATT) means a Zero Energy Building.vGreen Icon has an energy consumption of EPtot=0,00 kWh/mc per year so it reaches the enegy class A+.

The first work-unit GREEN ICON, designed by Rizoma Architetture in collaboration with ProholzEmilia, is placed in the new BIOENERGY system in Mantova’s plain.

N.O.W. Green Icon

  • Architects: Rizoma Architetture
  • Project: N.O.W. Green Icon
  • Completed: February 2012
  • Software used: AutoCAD, Rhinoceros and Cinema 4D


Casa poligonal in Bendinat, Mallorca by Juana Canet Arquitectos

Thursday, June 28th, 2012

Article source: Juana Canet Arquitectos

The site is located in a housing development area in Calvia coast, close to a pine forest overlooking  the sea. The client  wanted to have a house with views among the trees.

The building is fitted in the plot towards the buildable boundary enclosing itself in a half moon shape and focusing all the rooms towards the sea. In order to preserve the existing trees the shape of the building is adapted to their position, so the constructed area is understood as independent pavillions on the one side connected on the other through a common and ample area that allows people to move along.

Casa poligonal

  • Architects: Juana Canet Arquitectos
  • Project: Casa poligonal
  • Location: Housing development in Bendinat, Mallorca
  • Type: Single house with swimmingpool and garage
  • Team: Juana Canet arquitectos
  • Client: Private
  • Contractor: Eix 114 s.l.
  • Surface: 267,27  m2
  • Contract value: 257.824,19 €
  • Data: Under construction 30%
  • Software used: Autocad,3d max, Photoshop, Rhino


The Twins Science Park in Amsterdam, The Netherlands by 24H Architecture

Thursday, June 28th, 2012

Article source: 24H Architecture

Within in de urban scheme of KCAP – Kees Christiaanse for the Science Park in Amsterdam, 24H>architecture was commissioned to make a proposal for one of the five housing projects, called ‘the Twins’. The location is situated between the Oosterringdike and the Caroline Mac Gillavrylaan.

Image Courtesy Boris Zeisser

  • Architects: 24H Architecture
  • Project: The Twins Science Park
  • Location: Amsterdam, The Netherlands
  • Client: Heddes Vastgoed
  • Construction: ABT bv
  • Fire/building physics/noise advisor: Peutz bv
  • Installation: ILEX Installatiemanagement bv
  • Contractor: Heddes Bouw & Ontwikkeling B.V.
  • Software used: AutoCad


GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley: YII 2016
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy