Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Cafe Lolita in Ljubljana, Slovenia by Trije arhitekti

Tuesday, June 19th, 2012

Article source: Trije arhitekti

Materials: preserved old parquet, exposed painted brick wall, spatolato, laquered iron, textile and custom designed ceiling print
Concepts: Lolita is the latest fruit of long term collaboration between architectural office Trije arhitekti and client Kaval Group

Occupying the former warehouse in the central historic palace in Ljubljana, Lolita gives a tribute to a tradition of cafes and the richness of living on the crossroads where one enjoys listening to a variety of everyday stories while brewing one’s own behind a newspaper at the same time.

Image Courtesy Miran Kambič

  • Architects: Architectural office Trije arhitekti – led by architect Andrej Mercina
  • Project: Cafe Lolita
  • Location: Historic center of Ljubljana, Slovenia
  • Completed date: January 2011
  • Gross area: 160m2
  • Photographer: Jagoda Jejčič, Miran Kambič
  • Awarded or not: Nominee: Best Hospitality Interior 2012; Restaurant and Bar Design Awards 2012 (comment:  results Autumn 2012)
  • Software used: AutoCAD 2010 and 2011

(more…)

ECO-Sport Facility in Puerto Rico by Ramirez-Gonzalez Studio, PSC

Tuesday, June 19th, 2012

Article source: Ramirez-Gonzalez Studio, PSC

Proposed by Ramirez-Gonzalez Studio architecture firm, the ECO-Sport Facility is a novel design, which accomplishes the re-engineering of the typical basketball court architecture in Puerto Rico into a sustainable building. The concept was based on the firm’s own philosophy by conceiving ‘Architecture as an Adapted Product’ which permits the project architects to improve the structure environmental output within cost-efficiency parameters from early stages of the design development.

ECO-Sport Facility

  • Architects: Ramirez-Gonzalez Studio, PSC
  • Project: ECO-Sport Facility
  • Location: Puerto Rico
  • Design Team: Emmanuel Ramirez, AIA (principal) and Wilfredo Mendez, AIT
  • Cost: 320,000 USD
  • Status: Preliminary Development
  • Software used: AutoCAD & SketchUp

(more…)

Port and Cruise Service Center International Competition in Kaohsiung, Taiwan by Gianluca Milesi Architecture

Saturday, June 16th, 2012

Article source: Gianluca Milesi Architecture

Architecture as an expression of changing times

Kaohsiung city is a port and, as many other ports is in a situation of changing. The reasons of this changing have been very well analysed by many.. factories that move their production somewhere else. the decreasing of the traffic on the sea.. and many others depending on the particular locations. New York and London already provided, at least partially, to reconvert the unused piers or the part of the city close to the sea or the river previously dedicated to the maritime traffic to other destinations and a different life. The case of Kaohsiung is somehow similar, but there is a difference in the conception of the changing and the strategy related. Many cities just dismissed their piers and their warfs because they were useless and decided to dedicate these part of the city to new and different destinations.

Port and Cruise Service Center

  • Architects: Gianluca Milesi Architecture
  • Project: Port and Cruise Service Center International Competition
  • Location: Kaohsiung, Taiwan
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

A054 Dwellings Blaricummermeent in Blaricum, The Netherlands by Casanova+ Hernandez Architects

Friday, June 15th, 2012

Article source: Casanova+ Hernandez Architects

The project “Black & White Twins” experiments with the spatial and visual integration of compact collective housing solutions in the new exclusive urban development of Blaricummermeent, which is mainly formed by single-family houses and villas. The twin buildings provide affordable apartments within small-scale housing blocks, four levels high, minimizing the footprint of the intervention, the volume of the buildings and therefore their physical impact in the residential area.

Image Courtesy Christian Richters

  • Architects: Casanova+ Hernandez Architects
  • Project: A054 Dwellings Blaricummermeent
  • Location: Blaricum, The Netherlands
  • Programme: 29 Apartments
  • Client: Blauwhoed Eurowoningen
  • Project By: casanova + hernandez architects
  • Main Architects: Helena Casanova, Jesus Hernandez
  • Main Responsible For The Development: Thomas Been
  • Design Team: Robert Taapken, Rutger Huiberts, Marta Marotta, Isabel Illanes Yerón, Robbert van de Straat, Pablo Viña
  • Software used: Autocad, Skechtup and Photshop.

(more…)

Deck over a roman site in Cartagena, Spain by Amann-Canovas-Mauri

Thursday, June 14th, 2012

Article source: Amann-Canovas-Mauri

The building is essentially a cover protecting the remains of a Roman assembly (thermal baths, forum and domus) in the archaeological site of Molinete Park in Cartagena, Spain.

This cover is certainly another piece in the historic area of Cartagena whose main architectural challenge is to reconcile very different architectures; from the roman time, passing through baroque to nowadays, making all the interventions vibrate together in the neighborhood. It is a transition element, between very diverse urban conditions: in size, material and structure; from the dense city centre to the sloping park.

Image Courtesy David Frutos

  • Architects: Amann-Canovas-Mauri
  • Project: Deck over a roman site
  • Location: Cartagena, Spain
  • Situación: PARQUE DEL MOLINETE. CARTAGENA MURCIA
  • Dates: Project: October2008.-July2009
  • Construction: september2010-november2011
  • Authors: Atxu Amann, Andrés Cánovas, Nicolás Maruri
  • Team: Nacho Álvarez-Monteserín, Javier Gutiérrez, Ana López, Pablo Sigüenza, José López
  • Photographer: David Frutos
  • Promoter: Cartagena Puerto de Culturas
  • Software used: autocad and photoshop and 3d studio

(more…)

My Cousin´s House in Oberpullendorf, Austria by Martin Mostböck Design Development

Thursday, June 14th, 2012

Article source: Martin Mostböck Design Development

A Single-family residence with garden. 150 m2 living area, terrace, office, carport. House with controlled living space ventilation (passive house).
The residence was designed for doing-it-yourself. Shape, geometry and internal organisation are inspired by the movement of the inhabitants, the sun and the moon. The body and shape of the house are designed on one hand to open up big and broad windows on two facades to the garden to bring in as much light as possible to the living areas.

My Cousin’s House

  • Architects: Martin Mostböck Design Development
  • Project: My Cousin´s House
  • Location: Oberpullendorf, Austria
  • Floor area: app. 150,0 M2
  • Planning time: 2004 – 2005
  • Completion: 2010
  • Plot area: 665 m²
  • Building area: 128 m²
  • Building volume: 875 m³
  • Sustainability: Energy system: gas-calorific value boiler, Solar collector panels for warm water and heating Controlled living space ventilation – passive house
  • Type: Terrace, carport, office spaces
  • Budget: app. 225.000.- €
  • Software used: AutoCAD

(more…)

Prismatic Colours in Montreal, Canada by Jean Verville Architecte

Wednesday, June 13th, 2012

Article source: Jean Verville Architecte

In downtown Montreal, a loft for an artist who collects contemporary art and design objects is intended to be a tribute to creativity. Architect Jean Verville designed this unusual interior, which is both playfully colourful and sometimes a calm, peaceful white.

To satisfy a client who wants his home life to stimulate creativity and lead him to explore new avenues of work, Verville offers an environment that distils the essence of its owner. Using minimal interventions and simple materials, the architect awakens the senses and blurs the perception of the space.

Prismatic Colours

  • Architects: Jean Verville Architecte
  • Project: Prismatic Colours
  • Location: Montreal, Canada
  • Typology: Dwelling (loft)
  • Area: 1400 square feet
  • Year designed: 2011
  • Year built: 2011
  • Colours and finishes: M.F.B.B.
  • Architectural cabinetmaker: Pierre Daigle
  • Upholsterer: Salomon Del-Cid
  • Acrylic mirrors: Judith Lamour
  • Software used: Hand drawing, sketchup and autocad — with a very strong surveillance and coordination of work site.

(more…)

Confederação Nacional de Municípios in Brazil by OSPA

Wednesday, June 13th, 2012

Article source: OSPA

Since its inauguration, Brasília is present in the imagination of all of the modern architects. Besides all of the inherent symbolism, designing in Brasília presupposes a contextualization with its monumental scale. The architecture that makes Brasília unique, sometimes also makes it distant from the human being and its needs.

Confederação Nacional de Municípios

  • Architects: OSPA
  • Project: Confederação Nacional de Município
  • Location: Brazil
  • Software used: Autodesk AutoCAD, Autodesk 3ds max, Adobe Photoshop.

(more…)

Rain Architecture, Multiproposal gallery in Valdivia, Chile by Mauricio Silva Arquitectos

Wednesday, June 13th, 2012

Article source: Mauricio Silva Arquitectos

From the evolution that squares have experienced, there is a new way to use and exploit its inside: the galleries. The main function of these is to link the exterior and interior of the block from the gallery as a space for mediation and where public space is mixed with the commercial one. In Valdivia, a city where it rains most of the time, this type of space is an opportunity to experience the city throughout the year and revitalize the public space and local business.

Multiproposal gallery

  • Architects: Mauricio Silva Arquitectos
  • Project: Rain Architecture, Multiproposal gallery
  • Location: Valdivia, Chile
  • Site Building Area Size: 2500 mt 2
  • Type: mixed use (commercial, office, housing)
  • Area: 15300 mt2
  • Software used: Autocad and sketchup used for modeling, Artlantis, photoshop and illustrator for rendering and schemes. Ecotect addition to the building thermal modeling

(more…)

National Creative Cluster in Beijing, China by Sasaki Associates

Tuesday, June 12th, 2012

Article source: Sasaki Associates

Since the beginning of the 21st century, Beijing has made huge strides to solidify its position as one of the world’s great cities. It is a city that is modernizing rapidly—skyscrapers are rising out of fallow fields, a new transportation system is extending the reach of the city, and environmental initiatives are improving air and water quality. Fresh ideas are also emerging, while still embracing the rich traditions of the past. Near Songzhuang, a quiet village on the outskirts of Beijing, a unique opportunity exists to create a new urban district dedicated entirely to the cultivation of new ideas.

Public plazas and parks are also used for large gathering spaces for product launches, concerts, and other events

  • Architects: Sasaki Associates
  • Project: National Creative Cluster
  • Location: Beijing, China
  • Software used: AutoCAD, Sketch-Up, 3D Studio Max (with the VRay plug in), Photoshop, Illustrator, InDesign

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy