Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Plaza de “El Almendro” in Camas, Spain by abau

Wednesday, February 22nd, 2012

Article source: abau

The square is located at the confluence of several streets with different slopes, which generates a surface with different levels. Originally organized by stairs, pavement is badly deteriorated and the vegetation has emerged spontaneously with the participation of some neighbors. The wooded’s surface roots have generated many problems of flatness on the pavement.   The project tries to respond to the needs of accessibility caused by the considerable heights differences.

Plaza de "El Almendro"

  • Architect: abau
  • Name of Project: Plaza de “El Almendro”
  • Location: Camas, Spain
  • Software used: AutoCAD and CYPE Ingenieros

(more…)

Lev Office Building in Ljubljana, Slovenia by Studio Kalamar

Tuesday, February 21st, 2012

Article source: Studio Kalamar

Location: The building stands on the corner of the most frequented intersection in the city.
Urban context: Impact of heavy traffic, diversity of physical space.

Program: Visible part, housing offices and retail space, represents only a third of the entire structure. Below ground, three more levels accommodate parking and additional programs for the adjacent hotel.

Scheme: Protective against the impact of the intersection, the building is oriented within where, together with adjacent buildings, it forms an open atrium, a nucleus of public activities.

Exterior View (Images Courtesy Miran Kambič)

  • Architect: Andrej Kalamar – Studio Kalamar
  • Name of Project: Lev Office Building
  • Location: Ljubljana, Slovenia
  • Structural Engineering: Anton Berce, IZTR
  • HVAC Engineering: Lenassi
  • Photographs: Miran Kambič
  • Software used: AutoCAD

(more…)

Extension of primary-secondary school Stefanacci in Florence, Italy by Fabio Capanni Workshop

Tuesday, February 21st, 2012

Article source: Fabio Capanni Workshop

The extension of the primary and secondary school in San Piero a Sieve is located very close to the city of Florence.

The building consists of 630 square meters of new surfaces that will host the laboratories, the dean’s office, the offices for the scholastic staff, and an auditorium that works as an all-purpose space. Rooms and the gym will still be in the old buildings, built during the Sixties, and the new construction had also to connect to them.

Image Courtesy Christian Richters, Fabio Capanni

  • Architects: Fabio Capanni Workshop
  • Project: Extension of primary-secondary school Stefanacci
  • Location: Via Trifilò 2, San Piero a Sieve (Firenze)
  • Project and supervision of works: Fabio Capanni, Claudio Marrocchi
  • Collaborators: Daniele Buzzegoli, Stefano Servi
  • Structures : Riccardo Papi
  • Systems: Claudio Magni
  • Customer: Municipality of San Piero a Sieve
  • Builder: Edil F Due, Sacafati (SA)
  • Chronology: 2004-2006: project, 2006-2008: realization
  • Dimensional data: 1.300 mq lot surface, 630 mq building surface, 2.600 mc building volume
  • Photography: Christian Richters, © Fabio Capanni
  • Software used: AutoCAD, Rhinoceros, Maxwell, Photoshop, Primus, Microsoft Office

(more…)

Geschenke Gerdes in Darmstadt, Germany by Costas Koutsoftides Architects (designed with ArchiCAD and AutoCAD)

Saturday, February 18th, 2012

Article source: Costas Koutsoftides Architects

Create an interior within an existing shop that facilitates the process of making, displaying, and selling a variety of bombonieres. These items are gifts that are given out on special occasions, such as at weddings and christenings, to the guests. They usually come with 5 Jordan almonds, which for weddings, symbolises health, wealth, happiness, fertility and long life.

Image Courtesy Gerd Baum

  • Architects: Costas Koutsoftides Architects
  • Project: Geschenke Gerdes
  • Location: 28 Pfungstädter Street, Darmstadt, Germany
  • Client: Lisa Gerdes
  • Project Architect: Adam Wagg / Costas Koutsoftides of  Koutsoftides Architects
  • Photographer: Gerd Baum
  • Size: 56 sqm / 602 sqft
  • Software used: AutoCAD and ArchiCAD

(more…)

3 Whale Rock Lane Residence in East Hampton, New York by Eisner Design

Saturday, February 18th, 2012

Article source: Eisner Design

Its entrance sequence requires one to circulate along a raised stone planter wall that acts as a landscaped transition from the exterior to the interior of the house.  The entryway occurs at the juncture of the two wings of an L-shaped plan.  One enters into the taller, one-and-a-half storey public living area wing, an open loft space containing the kitchen, dining and living space. The smaller private wing consists of three bedrooms.

Image Courtesy Paul Warchol

  • Architects: Eisner Design
  • Project: 3 Whale Rock Lane Residence
  • Location: East Hampton, New York
  • Architect Design: Joe Eisner, AIA LEED AP
  • Photographer: Paul Warchol
  • Software used: Autocad and SketchUp

(more…)

G-M House in Apulia region, Italy by Bart Conterio Architect

Saturday, February 18th, 2012

Article source: Bart Conterio Architect

The G-M house is located in the South-Eastern extremity of Italy , and it is surrounded by the green typical olive trees and the blue Mediterranean Sea. The project is based on the principles of bio-climatic architecture and green building, through the perfect integration of architecture, landscape and micro climatic comfort. (consume less for a better life !!!).

G-M House

  • Architects: Bart Conterio Architect
  • Project: G-M house
  • Location: Capo di Leuca, province of Lecce, Apulia region, Italy
  • Software used: Energyplus, Autocad, Ecodesigner, Archicad, Google Sketchup, Maxwell Render EG

(more…)

PH Loft Arias in Ciudad Autónoma de Buenos Aires, Argentina by HM.Arquitectos

Saturday, February 18th, 2012

Article source: HM.Arquitectos

From to barbecue shed to loft. Construction was organized through a very specific set of needs from the owner. It had to be an area with independent access within the house, one that not only would solve the needs for leisure and recreation, but that would also have the asset of functioning along with the garden as a backing for those needs. This would result in a barbecue shed/playroom/office as well as the guest rooms.

Front View (Images Courtesy Mastepix)

  • Architect: HM.Arquitectos
  • Name of Project: PH Loft Arias
  • Location: Ciudad Autónoma de Buenos Aires, Argentina
  • Construction Managers: HM.Arquitectos – Fernando Hitzig & Leonardo Militello
  • Collaborators: Ruben Ruiz
  • Photography: Mastepix
  • Software used: Autocad, 3d Studio Max

(more…)

Port and Cruise Service Center in Taiwan by LOVE architecture and urbanism

Thursday, February 16th, 2012

Article source: LOVE architecture and urbanism

Concept

STEP 1: EXTEND THE URBAN GRID

….therefore the sandou 4th rd. and the lingnan rd. will be extended on the site. the road extensions will be connected by the new “seashore drive” which is parallel to the existing seashore rd. – but as close to the sea as possible (20m harbour facility zone).

Rendering

  • Architect: LOVE architecture and urbanism
  • Name of Project: Port and Cruise Service Center
  • Location: Taiwan
  • Type: International competition
  • Software used: AutoCAD

(more…)

Brian Road in Johannesburg, South Africa by Nico van der Meulen Architects (designed using AutoCAD and Revit)

Wednesday, February 15th, 2012

Article source: Nico van der Meulen Architects

Nico van der Meulen Architects transformed what was originally a 1970s house into a home ideal for the 21st century.  The architectural firm created an atrium and a moat around the hall and dining room, with a curtain of water falling past a cut-out in the atrium wall.  The end result is a beautiful breakfast garden to the east of the kitchen, overlooking the moat and water feature.  The family and dining room opens onto a spacious 13 m x 6 m lanai through frame less folding doors – an excellent idea as this doubles the space available for entertaining during the long South African summers.  The interior walls were removed to create a spectacular double volume living area and to form a more seamless floor plan.  The roof over the lanai is suspended from a two-storey-high beam traversing the pool.  The outcome is a contemporary home that is open-plan with north-facing layout ideal for family living and entertaining.

Image Courtesy Nico and Rudolph van der

  • Architects: Nico van der Meulen Architects
  • Project: Brian Road
  • Location: Johannesburg, South Africa
  • Software used: Autodesk Autocad and Autodesk Revit Architecture

(more…)

Vittra Telefonplan in Stockholm, Sweden by Rosan Bosch

Tuesday, February 14th, 2012

Article source: Rosan Bosch

How do you create a school without any walls? In the 30 schools of the Swedish free school organisation Vittra there are no classes or classrooms – instead, the students are taught in groups according to level based on the school’s pedagogical principles of ’the wateringhole’, ’the show-off’, ’the cave’, ’the campfire’ and ’the laboratory’ – didactic approaches that create different types of learning and teaching situations. In Vittra, they do not believe in regular classes and the school organisation’s vision is to create an everyday for the individual students where individual development, a living cultural work and challenging learning environments are most important.

The Lunch Club_ is both a place for working and eating (Images Courtesy Design RosanBosch and Photo Kim Wendt)

  • Architect: Rosan Bosch
  • Project Title: Vittra Telefonplan
  • Location: Hägersten, Stockholm, Sweden
  • Clients: Vittra A/B
  • Photographer: Kim Wendt
  • Software used: Autocad and Adobe Suite

(more…)

Graphisoft ARCHICAD  Download a 30-Day FREE trial
Canon
Bentley:Microstation License
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy