Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Spröjs Castle by Visiondivision

Tuesday, March 27th, 2012

Article source: Visiondivision

Spröjs Castle is the residence of choice for an opulent lifestyle where you can combine different modular towers into your very own magnum opus or chose from a premade composition that comes with the promise of excellence.

Towers with built-in fountains for unrivaled extravaganza

  • Architect: Visiondivision
  • Name of Project: Spröjs Castle
  • Software used: A mix of Rhino, Autocad, Photoshop and some Maya

(more…)

Spire in Våler, Norway by Visiondivision

Tuesday, March 27th, 2012

Article source: Visiondivision

The church in the small town of Våler in Norway burned down and a competition was held to build a new one. We joined the competition with the following entry. It is in the rural church that the people in a village is experiencing its most emotional moments; this is where the kids run out on the last day of school, it is here you get married and it is here you bid farewell to your loved ones.

Mountain

  • Architects: Visiondivision
  • Project: Spire
  • Location: Våler, Norway
  • Software used: A mix of Rhino, Autocad, Photoshop and some Maya

(more…)

PH house in El Salvador, Argentina by Estudio HMA

Sunday, March 25th, 2012

Article source: Estudio HMA

From the beginning of the project we understood the intrinsic qualities associated with this piece of urban fabric. We here deal with a rectangular space with measures that do not exceed 7.50 m x 12.00 m located practically in the heart of the square. This is a dwelling unit of the type of the row houses in the city of Buenos Aires. At the beginning of the last century it was common to build small houses with the conceptual characteristics of the “sausage house” multiplied for the depth of an urban lot. The project then rose as a challenge to customer demands whose programmatic needs far exceeded the possibilities offered by the nature of the terrain. We also had to be aware of the constraints brought by the responsibility of reforming a historic site that was protected by the law of the city of Buenos Aires.

Image Courtesy Esteban Lobo

  • Architects: Estudio HMA
  • Project: PH house
  • Location: El Salvador 4633, Buenos Aires, Argentina
  • Project Documentation Construction Managers: HM.Arquitectos. Fernando Hitzig & Leonardo Militello
  • Collaborators: Juliana Zorza, Rubén Ruiz, Carmela Zuleta
  • Structure consultant: Ing. Carlos Gandini
  • Construction: Estudio HMa
  • Photography: Esteban Lobo
  • Project Type: House + pool at the terrace
  • Built Area: 126 m2
  • Exposed Area: 63 m2
  • Software used: Autocad, 3d Studio Max

(more…)

Spröjs Cabin by Visiondivision

Sunday, March 25th, 2012

Article source: Visiondivision

Spröjs Cabin is a small 40 m2 summer house with a 20 m2 loft to host a normal family of a couple with two to three kids. Although it is fairly small the house includes a kitchen, a living room, a medium sized bathroom and an extra room plus a sleeping loft. The small size and the simple design of the house make it very easy to fit into almost any Scandinavian environment. The interior is however light and modern and very functional to serve the custom-made needs for any particular client.

Exterior black

  • Architects: Visiondivision
  • Project: Spröjs Cabin
  • Software used: A mix of Rhino, Autocad, Photoshop and some Maya

(more…)

Vdara Hotel & Spa at CityCenter in Las Vegas,Nevada by Rafael Vinoly Architects

Saturday, March 24th, 2012

Article source: Rafael viNoly architects

The CityCenter Condo-Hotel, a $510 million, 1,543- room condominium-hotel, is a key component of MGM/Mirage’s new flagship development. The 1.6 million-square-foot residential hotel includes three dining facilities, pool and spa areas, and additional retail and office space. The hotel tower will be 54 stories tall, rising up to 550 feet above street level. Located at a strategic junction between the new CityCenter hotel and casino and the existing Bellagio Hotel & Casino, the project will serve as the gateway between both buildings, connecting two of MGM/Mirage’s largest and most prominent properties in Las Vegas. The project is scheduled to be completed by winter 2009.

Vdara Hotel & Spa at CityCenter

  • Architects: Rafael Vinoly Architects
  • Project: Vdara Hotel & Spa at CityCenter, Las Vegas
  • Location: Las Vegas, Nevada
  • Budget: $ 527,000,000
  • Size: 1,610,000 gross square feet
  • Project status: Completed
  • Type: Hotel, Residential, Retail, Pool, Spa, Conference Center
  • Software used: Didn’t really use anything special. Just Autocad. Did a lot of modeling in Rhino and did some sun exposure studies and renderings in 3d Studio Max as well.

(more…)

SEA House in Esposende, Portugal by VA studio

Saturday, March 24th, 2012

Article source: VA studio

The outer look of this patch of territory, still showing signs of rural traits, is somehow maintained by making slight corrections along the wall and by putting a new set of site access gates, that will fully preserve which is already standing and assure that it fits the surroundings. The projects’ concept had urban and landscape integration thoroughly into account – it was intended to give the structure a contemporary look, intentionally contrasting with the rustic granite walls.

Image Courtesy Alberto Plácido

  • Architects: VA studio
  • Project: SEA House
  • Location: Esposende, Portugal
  • Project Team: VA studio
  • Construction Type: Housing
  • Client Fernando Silva
  • Project Date: 2005
  • Construction Date 2007/2010
  • Photography: Alberto Plácido
  • Software used: AutoCAD

(more…)

Alves Martins High School in Viseu, Portugal by Cândido Chuva Gomes, Arquitectos

Friday, March 23rd, 2012

Article source: Cândido Chuva Gomes, Arquitectos

The original building was designed by José Costa e Silva, and opened in April 1948. Two big classrooms volumes were positioned symmetrically, joined by a central body, which included an archway, where the covered recess area operated.

Through a gallery, and from the main hall, the two volumes (corresponding to the old male and female wings) linked themselves to another volume, corresponding to the gymnasium and the dining hall.

Image Courtesy FG+SG

  • Architects: Cândido Chuva Gomes, Arquitectos
  • Project: Alves Martins High School
  • Location: Viseu, Portugal
  • Management And Coordination Of The Studies: Cândido Chuva Gomes Arquitectos, Lda. / Ana Pestana, Unipessoal Lda.
  • Project Team – Architecture: Cândido Chuva Gomes, Sandra Amorim, Ana Florêncio, Ana Luísa Brandão, Bruno Bernardo, Bruno Ribeiro, Cristina Martinho, Paulo Melo, Vanda Vitorino, Luís Quaresma, Lénia Nobre, João Seabra
  • Stability / Water Supply And Sewage Network / Gas / Solid Waste: Proconsultores Ii, Projectos E Consultoria, Lda.,  Joaquim De Almeida
  • Electrical Equipment And Installation Project / Telecommunications Equipment Mechanical Equipment / Centralised Technical Management / Solar Power System / Safety Systems: Proconsultores Ii, Projectos E Consultoria, Lda., Hélder Reis
  • Hvac Systems: Proconsultores Ii, Projectos E Consultoria, Lda., José Marques
  • Accoustics Design: Artacústica, Engenharia Acústica, Carlos Fafaiol
  • Lighting Design: Eclipz, Rogério Oliveira
  • Landscape Design (Biodesign): Arquitectura Paisagista, Planeamento E Consultadoria Ambiental, Lda. / Lodo , Arquitectura Paisagista, Lda., Carlos Correia Dias, Elsa Barroso, Armando Conceição, Lúcia Barreto, Cristina Matias
  • Client: Parque Escolar, E.P.E.
  • Timeline: 2008-2011
  • Project Name: Projecto De Reformulação E Ampliação Da Escola Secundária Públia Hortênsia De Castro
  • Building Contractor: Lena Construções / Abrantina / Mrg Engenharia E Construção
  • Photography: José Campos
  • Software used: Autocad

(more…)

Sugarbug Dental Office in Oxnard, California by AB Design Studio Inc.

Friday, March 23rd, 2012

Article source: AB Design Studio Inc.

AB design studio creating a high-design | high-tech space for a new pediatric dental office in Southern California, named simply as “Sugarbug.”  Our client wanted a fun, explorative, out-of-the box designed interior to provide services to his dental clients. The design of the interior was mainly directed by focusing on the experience of the child patient. Also important in the process of designing this interior was a focus placed on branding. Like many of our commercial tenant improvement projects, this project focuses on enabling the architecture of the space to contribute directly to the Sugarbug brand that the client is creating. The finished product will blend together all the aspects of the business of running a contemporary dental office through a well thought out and comprehensively designed architectural, functional, informational and graphical experience.

Image Courtesy Ciro Coelho

  • Architects: AB Design Studio Inc.
  • Project: Sugarbug Dental Office
  • Location: Oxnard, California
  • Photography: Ciro Coelho
  • Software used: AutoCAD and SketchUp

(more…)

Kelly Residence in Los Angeles, California by Abramson Teiger Architects

Friday, March 23rd, 2012

Article source: Abramson Teiger Architects

Sustainable design is at the heart of this house without being overtly expressed in the external aesthetic. The house is designed with photovoltaic cells hidden on the roof, grey water reclamation, artificial lawn, and rainscreen facades to help thermal stability, as well as flash hot water heating, bamboo floors and ponds of water to promote evaporative cooling in front of large expanses of glass. The residence is articulated as  “boxes ” each finished in white plaster, and raised on steel pilotis.

Kelly Residence

(more…)

Loft Lloydkwartier by Rotterdam, The Netherlands by 123DV Modern Villas

Thursday, March 22nd, 2012

Article source: 123DV Modern Villas

In a former warehouse in the harbour of Rotterdam a loft is realised. The characteristic of the dwelling is its spaciousness, which exists because of a surplus of space. To maintain this quality, the program of the dwelling is placed into the space in two separate elements. The two elements both have their own materiality and are placed in the space on their own way.

Image Courtesy Christiaan de Bruijne

  • Architects: 123DV architecture & consult
  • Project: Loft Lloydkwartier
  • Location: Rotterdam, The Netherlands
  • Project architect: Liong Lie
  • Collaborators: Wies Nordman, Anne Harmsen
  • Sliding doors, whirlpool: Vincent de Rijk
  • Structure: Kees Willem Neeleman
  • Building physics: Cauberg Huygens
  • Gross floor surface: 145 m2
  • Completion: 2005
  • Pictures: Christiaan de Bruijne
  • Software used: AutoCad and Cinema 4D

(more…)

Graphisoft ARCHICAD  Download a 30-Day FREE trial
Bentley: Be Inspired Awards
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy