Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

SEA House in Esposende, Portugal by VA studio

Saturday, March 24th, 2012

Article source: VA studio

The outer look of this patch of territory, still showing signs of rural traits, is somehow maintained by making slight corrections along the wall and by putting a new set of site access gates, that will fully preserve which is already standing and assure that it fits the surroundings. The projects’ concept had urban and landscape integration thoroughly into account – it was intended to give the structure a contemporary look, intentionally contrasting with the rustic granite walls.

Image Courtesy Alberto Plácido

  • Architects: VA studio
  • Project: SEA House
  • Location: Esposende, Portugal
  • Project Team: VA studio
  • Construction Type: Housing
  • Client Fernando Silva
  • Project Date: 2005
  • Construction Date 2007/2010
  • Photography: Alberto Plácido
  • Software used: AutoCAD

(more…)

Alves Martins High School in Viseu, Portugal by Cândido Chuva Gomes, Arquitectos

Friday, March 23rd, 2012

Article source: Cândido Chuva Gomes, Arquitectos

The original building was designed by José Costa e Silva, and opened in April 1948. Two big classrooms volumes were positioned symmetrically, joined by a central body, which included an archway, where the covered recess area operated.

Through a gallery, and from the main hall, the two volumes (corresponding to the old male and female wings) linked themselves to another volume, corresponding to the gymnasium and the dining hall.

Image Courtesy FG+SG

  • Architects: Cândido Chuva Gomes, Arquitectos
  • Project: Alves Martins High School
  • Location: Viseu, Portugal
  • Management And Coordination Of The Studies: Cândido Chuva Gomes Arquitectos, Lda. / Ana Pestana, Unipessoal Lda.
  • Project Team – Architecture: Cândido Chuva Gomes, Sandra Amorim, Ana Florêncio, Ana Luísa Brandão, Bruno Bernardo, Bruno Ribeiro, Cristina Martinho, Paulo Melo, Vanda Vitorino, Luís Quaresma, Lénia Nobre, João Seabra
  • Stability / Water Supply And Sewage Network / Gas / Solid Waste: Proconsultores Ii, Projectos E Consultoria, Lda.,  Joaquim De Almeida
  • Electrical Equipment And Installation Project / Telecommunications Equipment Mechanical Equipment / Centralised Technical Management / Solar Power System / Safety Systems: Proconsultores Ii, Projectos E Consultoria, Lda., Hélder Reis
  • Hvac Systems: Proconsultores Ii, Projectos E Consultoria, Lda., José Marques
  • Accoustics Design: Artacústica, Engenharia Acústica, Carlos Fafaiol
  • Lighting Design: Eclipz, Rogério Oliveira
  • Landscape Design (Biodesign): Arquitectura Paisagista, Planeamento E Consultadoria Ambiental, Lda. / Lodo , Arquitectura Paisagista, Lda., Carlos Correia Dias, Elsa Barroso, Armando Conceição, Lúcia Barreto, Cristina Matias
  • Client: Parque Escolar, E.P.E.
  • Timeline: 2008-2011
  • Project Name: Projecto De Reformulação E Ampliação Da Escola Secundária Públia Hortênsia De Castro
  • Building Contractor: Lena Construções / Abrantina / Mrg Engenharia E Construção
  • Photography: José Campos
  • Software used: Autocad

(more…)

Sugarbug Dental Office in Oxnard, California by AB Design Studio Inc.

Friday, March 23rd, 2012

Article source: AB Design Studio Inc.

AB design studio creating a high-design | high-tech space for a new pediatric dental office in Southern California, named simply as “Sugarbug.”  Our client wanted a fun, explorative, out-of-the box designed interior to provide services to his dental clients. The design of the interior was mainly directed by focusing on the experience of the child patient. Also important in the process of designing this interior was a focus placed on branding. Like many of our commercial tenant improvement projects, this project focuses on enabling the architecture of the space to contribute directly to the Sugarbug brand that the client is creating. The finished product will blend together all the aspects of the business of running a contemporary dental office through a well thought out and comprehensively designed architectural, functional, informational and graphical experience.

Image Courtesy Ciro Coelho

  • Architects: AB Design Studio Inc.
  • Project: Sugarbug Dental Office
  • Location: Oxnard, California
  • Photography: Ciro Coelho
  • Software used: AutoCAD and SketchUp

(more…)

Kelly Residence in Los Angeles, California by Abramson Teiger Architects

Friday, March 23rd, 2012

Article source: Abramson Teiger Architects

Sustainable design is at the heart of this house without being overtly expressed in the external aesthetic. The house is designed with photovoltaic cells hidden on the roof, grey water reclamation, artificial lawn, and rainscreen facades to help thermal stability, as well as flash hot water heating, bamboo floors and ponds of water to promote evaporative cooling in front of large expanses of glass. The residence is articulated as  “boxes ” each finished in white plaster, and raised on steel pilotis.

Kelly Residence

(more…)

Loft Lloydkwartier by Rotterdam, The Netherlands by 123DV Modern Villas

Thursday, March 22nd, 2012

Article source: 123DV Modern Villas

In a former warehouse in the harbour of Rotterdam a loft is realised. The characteristic of the dwelling is its spaciousness, which exists because of a surplus of space. To maintain this quality, the program of the dwelling is placed into the space in two separate elements. The two elements both have their own materiality and are placed in the space on their own way.

Image Courtesy Christiaan de Bruijne

  • Architects: 123DV architecture & consult
  • Project: Loft Lloydkwartier
  • Location: Rotterdam, The Netherlands
  • Project architect: Liong Lie
  • Collaborators: Wies Nordman, Anne Harmsen
  • Sliding doors, whirlpool: Vincent de Rijk
  • Structure: Kees Willem Neeleman
  • Building physics: Cauberg Huygens
  • Gross floor surface: 145 m2
  • Completion: 2005
  • Pictures: Christiaan de Bruijne
  • Software used: AutoCad and Cinema 4D

(more…)

Warming Huts v.2012 in Manitoba, Canada by Mjölk Architects (designed with Rhino and AutoCAD)

Thursday, March 22nd, 2012

Article source: Mjölk Architects

Our winning entry to an international arts & architecture competition in Winnipeg, MB, Canada. Warming Huts v.2012 was an open competition, endorsed by the Manitoba Association of Architects.

Image Courtesy Polar Hen

 

  • Architects: Mjölk Architects
  • Project: Warming Huts v.2012
  • Location: Winnipeg, MB, Canada
  • Software used: AutoCAD and Rhinoceros

(more…)

House on Fire Island in New York by Studio Twenty Seven Architecture (designed with Rhino, AutoCAD, and Photoshop)

Thursday, March 22nd, 2012

Article source: Studio 27 Architecture

This is a summer beach house in the resort community of the Pines on Fire Island New York. The typology of the homes in the Pines is recognizable to anyone who has visited an East Coast Shoreline resort town. It is a builderdriven typology reflecting the pragmatism of the inhabitants of these coastal communities. Almost always the “good sense” pragmatism that allows these homes to be built affordably overtakes the inherent liveliness and natural spirit of the place and creates structures that are a bit dull. This project inserts some of the “spirit of the shore” into this “Yankee thriftiness” residential typology. Common detail and material remain, but the volume of the house is expressed as a skin, rather than as a box-like container. The skin keeps the heat in. Over time, the skin of woven cedar boards will assume the same patina as neighboring houses. Large windows are introduced to reveal a luxurious light interior.

Pool

(more…)

Hotel Ayre Rosselló in Barcelona, Spain by Johannes K. Wortmann

Sunday, March 18th, 2012

Article source: Johannes K. Wortmann

To be confronted with a building site in the shadow of the “Sagrada Familia“ a key work of  the Catalan master Antoni Gaudí, is an unique opportunity in the life of an architect.

We were perfectly aware that the particular modernist style – to be read as a Catalan version of Art Nouveau – influenced by surrealism, the colorful ornaments reflecting organic elements taken out of nature, as well as the daring structure of the cathedral, represents for the city of Barcelona the same overwhelming attraction as the Frank Gehry`s Guggenheim Museum for Bilbao.

Image Courtesy Stefan Müller

  • Architects: Johannes K. Wortmann
  • Project: Hotel Ayre Rosellón. 4* and 105 rooms
  • Location: Rosellón, 390, Barcelona, Spain
  • Promoter: ALCOTAS S.L (Operated by: Ayre Hoteles)
  • Project year: 2009
  • Co-authors: Guillermo Bañares, Carlos Narváez
  • Consultants: Juan Almendro Ferrer (HVAC), BOMA (Structure), TRAM (executive site management), José Luís Vázquez (client project management), Michela Mezzavila (lighting), Lucho Marcial + AVA Studio (Interior Design)
  • Collaborators: Serenella di Dio, Ava Costa, Laia Capellades
  • Construction company: COPCISA
  • Surface: 5.208 m2 (above ground level)
  • Photographs: Stefan Müller
  • Software used: AutoCAD

 

(more…)

The Multi-Use Complex in Distrito Federal, Brazil by FGMF Arquitetos

Saturday, March 17th, 2012

Article source: FGMF Arquitetos

The multi-use complex proposed for this 32.000m² lot aims at creating not only a new architectural reference for the region, but also a new destination for the city. Adding three different uses – retail, office buildings and modular offices – the new complex creates a landmark in the landscape, values the surroundings, and establishes a new shopping destination.

Image Courtesy FGMF Arquitetos

  • ARCHITECTS: Forte, Gimenes & Marcondes Ferraz Arquitetos
  • PROJECT: The Multi-Use Complex
  • LOCATION: Brasília – DF – Brazil
  • TYPE OF CONSTRUCTION: Multiuse Building
  • SITE AREA: 37,000.00 m²
  • BUILT AREA: 85,000.00 m²
  • DATE OF PROJECT: 2011
  • AUTHORS: Fernando Forte, Lourenço Gimenes e Rodrigo Marcondes Ferraz
  • COORDINATOR: Ana Paula Barbosa
  • ARCHITECTS: Carolina Matsumoto, Marina Almeida e Fábio Pittas
  • TRAINEES: Mayara Benegas
  • Software used: Autodesk AutoCAD, Adobe Illustrator and Google SketchUp for development and 3DSMax for the render images and videos.

(more…)

Windswept in San Francisco, California by Charles Sowers Studios

Friday, March 16th, 2012

Article source: Charles Sowers Studios

Windswept consists of 612 freely rotating wind direction indicators mounted parallel to the wall creating an architectural scale instrument for observing the complex interaction between wind and the building. The wind arrows serve as discrete data points indicating the direction of local flow within the larger phenomenon. Wind gusts, rippling and swirling through the sculpture, visually reveal the complex and ever-changing ways the wind interacts with the building and the environment.

Image Courtesy Bruce Damonte

  • Architects: Charles Sowers Studios
  • Project: Windswept
  • Location: Randal Museum, 199 Museum Way, San Francisco, CA
  • Size: 35’ length / 20’ height
  • Client: San Francisco Arts Commission/Randall Museum
  • Contractor: Rocket Science
  • Engineer: Hom-Pisano Engineers
  • Project Completion: 11/19/2010
  • Photography: Bruce Damonte
  • Architectural metal wall panels: Provided by QC Facades Rainscreen Solutions, Salt Lake City, UT
  • Software used: Autocad and Autodesk Inventor

(more…)

Graphisoft ARCHICAD  Download a 30-Day FREE trial
Bentley: Be Inspired Awards
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy