Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Intertwining Walks 2007 in Water Mill, NY by studio a/b Architects

Saturday, February 25th, 2012

Article source: studio a/b Architects

Awarded AIA Peconic Jurors Award for Architecture 2011

A pool house for an existing residence. Wrapped with tall hedges, the site is in a coastal, residential area on eastern Long Island. The main house is a barn-like wooden building, approached from the north, opening only to the east and west yards. The east yard incorporates a Japanese-influenced, stone garden. The west yard is an open lawn surrounded by trees; a large deck attached to the house, and a swimming pool at the southern end of the yard. Having no openings on the south of the house, the south yard was a non-distinctive back yard. The owner wanted the pool house to be located in this yard where it could naturally become a connecting point for the yards. Taking these micro contexts of the site, this project explores a device to generate “outdoor walking connections”.

View from West yard

  • Architects: studio a/b Architects
  • Project: Intertwining Walks 2007
  • Location: Water Mill, NY 11976
  • Contractor: Richard Roesel
  • Structure: 2X6 Platform Framing
  • Site Area: 40,000 sq. ft.
  • Floor Area: Enclosed area: 470 sq. ft.
  • Deck and porch: 469 sq. ft.
  • Photo Credit: studio a/b architects
  • Software used: AutoCAD

(more…)

Climate Protection Supermarket in Graz, Austria by Love Architecture

Friday, February 24th, 2012

Article source: Love Architecture

The first energy self‐sufficient store that produces more energy than it uses. Organic products and a healthy lifestyle are mega trends in our society and therefore in the food industry as well. When building supermarkets, environmental friendliness and sustainability are becoming increasingly important. Economically and ecologically sustainable construction and operation minimize the ecological footprint and reduce the life‐cycle cost of buildings.

Image Courtesy Jasmin Schuller

  • Architects: Love Architecture
  • Project: Climate Protection Supermarket
  • Location: Graz, Austria
  • Area: NSF 1,100m2, GFA 1,500m2
  • Date of completion: December 2011
  • General planner: LOVE architecture
  • Software used: AutoCAD

(more…)

Center for Social Services in Camas, Spain by Antonio Blanco Montero

Wednesday, February 22nd, 2012

Article source: Antonio Blanco Montero

The functions that contain a center for social services can classify in a wide and varied spectrum from the administrative processing, beyond the psychological attention. All of them are characterized with a residue of uncertainty and instability. It offers the possibility to investigate relationships between uses. Give certain properties of spaces through the honesty of materials. Capture life and keep it inside the building, but not limited to certain functions harboring fleeing to build a container detached from the outside world, the one that causes and solve.

Center for Social Services

  • Architects: Antonio Blanco Montero
  • Project: Center for Social Services
  • Location: Camas, Sevilla, Spain
  • Software used: AutoCAD and CYPE Ingenieros

(more…)

Public Space in Calle Ferrocarril, Spain by abau

Wednesday, February 22nd, 2012

Article source: abau

The intervention is located in a residual area, product from the regularization contained in the Master Plan, which realization depended on the public intervention. The extension in time of this precarious situation generated spontaneous ways of occupation, in some cases incompatible with each others, just as game area, pets walking and the one which finally reach to prevail, parking area. This situation supposes a conflict with the adjacent houses and, of course, with the transit of people in a walking area. The site area is about 580 m².

Night View

  • Architect: abau
  • Name of Project: Public Space in Calle Ferrocarril
  • Location: Ferrocarril Camas, Spain
  • Software used: AutoCAD and CYPE Ingenieros

(more…)

Plaza de “El Almendro” in Camas, Spain by abau

Wednesday, February 22nd, 2012

Article source: abau

The square is located at the confluence of several streets with different slopes, which generates a surface with different levels. Originally organized by stairs, pavement is badly deteriorated and the vegetation has emerged spontaneously with the participation of some neighbors. The wooded’s surface roots have generated many problems of flatness on the pavement.   The project tries to respond to the needs of accessibility caused by the considerable heights differences.

Plaza de "El Almendro"

  • Architect: abau
  • Name of Project: Plaza de “El Almendro”
  • Location: Camas, Spain
  • Software used: AutoCAD and CYPE Ingenieros

(more…)

Lev Office Building in Ljubljana, Slovenia by Studio Kalamar

Tuesday, February 21st, 2012

Article source: Studio Kalamar

Location: The building stands on the corner of the most frequented intersection in the city.
Urban context: Impact of heavy traffic, diversity of physical space.

Program: Visible part, housing offices and retail space, represents only a third of the entire structure. Below ground, three more levels accommodate parking and additional programs for the adjacent hotel.

Scheme: Protective against the impact of the intersection, the building is oriented within where, together with adjacent buildings, it forms an open atrium, a nucleus of public activities.

Exterior View (Images Courtesy Miran Kambič)

  • Architect: Andrej Kalamar – Studio Kalamar
  • Name of Project: Lev Office Building
  • Location: Ljubljana, Slovenia
  • Structural Engineering: Anton Berce, IZTR
  • HVAC Engineering: Lenassi
  • Photographs: Miran Kambič
  • Software used: AutoCAD

(more…)

Extension of primary-secondary school Stefanacci in Florence, Italy by Fabio Capanni Workshop

Tuesday, February 21st, 2012

Article source: Fabio Capanni Workshop

The extension of the primary and secondary school in San Piero a Sieve is located very close to the city of Florence.

The building consists of 630 square meters of new surfaces that will host the laboratories, the dean’s office, the offices for the scholastic staff, and an auditorium that works as an all-purpose space. Rooms and the gym will still be in the old buildings, built during the Sixties, and the new construction had also to connect to them.

Image Courtesy Christian Richters, Fabio Capanni

  • Architects: Fabio Capanni Workshop
  • Project: Extension of primary-secondary school Stefanacci
  • Location: Via Trifilò 2, San Piero a Sieve (Firenze)
  • Project and supervision of works: Fabio Capanni, Claudio Marrocchi
  • Collaborators: Daniele Buzzegoli, Stefano Servi
  • Structures : Riccardo Papi
  • Systems: Claudio Magni
  • Customer: Municipality of San Piero a Sieve
  • Builder: Edil F Due, Sacafati (SA)
  • Chronology: 2004-2006: project, 2006-2008: realization
  • Dimensional data: 1.300 mq lot surface, 630 mq building surface, 2.600 mc building volume
  • Photography: Christian Richters, © Fabio Capanni
  • Software used: AutoCAD, Rhinoceros, Maxwell, Photoshop, Primus, Microsoft Office

(more…)

Geschenke Gerdes in Darmstadt, Germany by Costas Koutsoftides Architects (designed with ArchiCAD and AutoCAD)

Saturday, February 18th, 2012

Article source: Costas Koutsoftides Architects

Create an interior within an existing shop that facilitates the process of making, displaying, and selling a variety of bombonieres. These items are gifts that are given out on special occasions, such as at weddings and christenings, to the guests. They usually come with 5 Jordan almonds, which for weddings, symbolises health, wealth, happiness, fertility and long life.

Image Courtesy Gerd Baum

  • Architects: Costas Koutsoftides Architects
  • Project: Geschenke Gerdes
  • Location: 28 Pfungstädter Street, Darmstadt, Germany
  • Client: Lisa Gerdes
  • Project Architect: Adam Wagg / Costas Koutsoftides of  Koutsoftides Architects
  • Photographer: Gerd Baum
  • Size: 56 sqm / 602 sqft
  • Software used: AutoCAD and ArchiCAD

(more…)

3 Whale Rock Lane Residence in East Hampton, New York by Eisner Design

Saturday, February 18th, 2012

Article source: Eisner Design

Its entrance sequence requires one to circulate along a raised stone planter wall that acts as a landscaped transition from the exterior to the interior of the house.  The entryway occurs at the juncture of the two wings of an L-shaped plan.  One enters into the taller, one-and-a-half storey public living area wing, an open loft space containing the kitchen, dining and living space. The smaller private wing consists of three bedrooms.

Image Courtesy Paul Warchol

  • Architects: Eisner Design
  • Project: 3 Whale Rock Lane Residence
  • Location: East Hampton, New York
  • Architect Design: Joe Eisner, AIA LEED AP
  • Photographer: Paul Warchol
  • Software used: Autocad and SketchUp

(more…)

G-M House in Apulia region, Italy by Bart Conterio Architect

Saturday, February 18th, 2012

Article source: Bart Conterio Architect

The G-M house is located in the South-Eastern extremity of Italy , and it is surrounded by the green typical olive trees and the blue Mediterranean Sea. The project is based on the principles of bio-climatic architecture and green building, through the perfect integration of architecture, landscape and micro climatic comfort. (consume less for a better life !!!).

G-M House

  • Architects: Bart Conterio Architect
  • Project: G-M house
  • Location: Capo di Leuca, province of Lecce, Apulia region, Italy
  • Software used: Energyplus, Autocad, Ecodesigner, Archicad, Google Sketchup, Maxwell Render EG

(more…)

Graphisoft ARCHICAD  Download a 30-Day FREE trial
Bentley: Be Inspired Awards
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy