Open side-bar Menu

Archive for the ‘Autocad’ Category

Adequacy Of The Structures Of Archaeological Site Of The Roman City Clunia in Burgos, Spain by A3GM Arquitectos (designed using AutoCAD)

Thursday, October 27th, 2011

Article source: A3GM Arquitectos

The interventions are part of the Master Plan developed by the scientific team that leads the Archaeological Site and focus on two specific elements, the covering of the mosaic of the “craterae” and the consolidation of the basement of the Temple of Jupiter.

Image Courtesy a3gm

  • Architects: A3GM Arquitectos
  • Location: Clunia, Burgos, Spain
  • Project Architects:Jesús Alba Elías, Laura García Juárez, Jesús García Vivar, Smara Gonçalves Diez, Carlos Miranda Barroso
  • Collaborators:Ignacio Martínez Fernández, arquitecto técnico/quantity surveyor
  • Software used: AutoCAD


Villa at Amundön in Brottkärr, Gothenburg by Wingårdh Arkitektkontor (designed using AutoCAD)

Tuesday, October 25th, 2011

Article source: Wingårdh Arkitektkontor

In spite of its location by the sea Gothenburg has very few residences with sites by the water. This unique site therefore called for special care and treatment, and for various reasons Wingårdh has designed buildings on it on three different occasions and for three different clients. The house that has now been built is for a family consisting of two adults, two teenage daughters and a small son.

Image Courtesy Ake E son Lindman

  • Architects: Wingårdh Arkitektkontor / Gert Wingårdh, Karin Wingårdh, Lennart Gullberg, Kajsa Halldén.
  • Project: Villa at Amundön
  • Location:Brottkärr, Gothenburg
  • Project administrators: Wickenbergs Bygganalys AB.
  • Contractors: Bergman & Höök, Frillesås Mur o Puts, FP Glasmagasinet AB, Gryler Natursten.
  • Gross area: 470 sqm.
  • Built year: 2000.
  • Other consultants: K: FB Engineering AB., V: EPG Konsult, E: Per Schönbeck Elprojekt AB.
  • Software used: Autocad 14


The Patient Gardener in Politecnico di Milano, Italy by Visiondivision

Tuesday, October 25th, 2011

Article source: Visiondivision

Visiondivision was invited as guest professors by Politecnico di Milano for their week-long workshop MIAW2. The workshop, playing with the metaphor of forests, aimed to generate new visions to explain the contemporary and immediate future ways of being in the spirit of green design, resilience, recycling, and ethical consciousness. Our intention with our project was to construct a study retreat at the campus with patience as the main key for the design. If we can be patient with the building time we can reduce the need for transportation, waste of material and different manufacturing processes, simply by helping nature grow in a more architectonic and useful way. The final result can be enjoyed at Politecnico di Milano in about 60 years from now.

The Patient Gardener

  • Architects: Visiondivision
  • Project: The Patient Gardener
  • Location: Politecnico di Milano, Italy
  • Partners in charge: Anders Berensson & Ulf Mejergren
  • Curators: Laura Daglio & Oscar Bellini
  • Students/Architects/Builders: Rachele Albini, Giada Albonico, Jacopo Biasio, Sara Caramaschi, Elisa Carraro, Desislava Dimitrova, Cristina Gatti, Elisa Gulino, Mariya Hasamova, Nina Mikhailova, Ottavia Molatore, Joao Molinar, Azadeh Moradiasr, Mohyedin Navabzadeh Navabi, Giuseppe Maria Palermo, Riccardo Somaini, Bogdan Stojanovic
  • Organizers: Luca Maria Francesco & Fabris Efisia Cipolloni
  • Project area: 50 sqm
  • Project year: 2011-2090
  • Software used: A mix of Rhino, Autocad, Photoshop and some Maya


Front to Back Infill in Ottawa, Canada by Colizza Bruni Architecture (designed using AutoCAD and SketchUp)

Tuesday, October 25th, 2011

Article source: Colizza Bruni Architecture

Front to back infill is an animated, front to back semi-detached which boasts two small yet spacious light-filled homes. The design was a collaboration of two architects, each designing one of the homes, and working together to fuse the two designs seamlessly into one another. The approach was to situate the two homes front to back instead of the traditional side to side. One home would face the street and engage the public realm, while the other would inhabit the private realm of the rear yard. Each unit is designed to take advantage of its exclusive position on the site resulting in two unique homes with their own distinctive character and personality.

Exterior view

  • Architects: Colizza Bruni Architecture Inc. / James Colizza & Anthony Bruni
  • Project: Front to Back Infill
  • Location: Ottawa, Ontario, Canada
  • Project Year: 2008
  • Project Area: 111 sqm / house
  • Construction Cost: $150 / sqf
  • Site: 25’ x 80’ (7.6m x 24.3m)
  • Photographs: Peter Fritz
  • Software used: Autocad and Google SketchUp


ISMOF – International School – Museum of Flamenco in Jerez de la Frontera, Spain by MUS Architects (designed using AutoCAD and 3DS Max)

Friday, October 21st, 2011

Article source: MUS Architects

Movements and gestures of dancers are full of expression and tension. Dancers bring the fascinated viewer into an internal world of experience and emotion through the swinging movement of their hips, decorative arrangement of their fingers and smooth vibration of the ornamental frills. Rhythmic and dynamic music transmits the spectator into a world of incredible aesthetic feelings awakening all senses and inflaming the imagination…

….This is how architecture dedicated to the culture of feisty flamenco should look like….

ISMOF - International School - Museum

  • Architects: MUS Architects
  • Project: ISMOF – International School – Museum of Flamenco
  • Location: Jerez de la Frontera, Spain
  • Architect Design: arch. Adam Zwierzynski, arch. Anna Porebska
  • Software used: AutoCAD, 3dsmax, PhotoShop for post production


Housing Razgledi Perovo in Kamnik, Slovenia by Dekleva Gregoric Arhitekti (designed using AutoCAD)

Thursday, October 20th, 2011

Article source: Dekleva Gregoric Arhitekti

The houses on Perovo stand on an exposed location with an exceptional view of the Kamniško-Savinjske Alps in the background. However the view is not the only characteristic of this location, as the houses represent a dominant feature of the valley when viewed from below. Thus the architectural task at hand brings at least two important challenges. First, it is necessary to design and create a quality living environment for the future residents, and second, the project provides an opportunity to redefine the look of the settlement on Perovo which has a rather heterogeneous and inharmonious layout with its scattered individual houses.

Image Courtesy Miran Kambic

  • Architects: Dekleva Gregoric Arhitekti
  • Project: Housing Razgledi Perovo
  • Location: Perovo, Kamnik, Slovenia
  • Project Team: Aljoša Dekleva u.d.i.a., M.Arch. (AA Dist),Tina Gregorič u.d.i.a., M.Arch. (AA Dist), Martina Marčan m.i.a., Daniel Schwartz u.d.i.a., Tea Smrke u.d.i.a.
  • Client: SAVA IP d.o.o., Ljubljana
  • Software used: AutoCAD


Rehabilitation of a Civic Center in Lanzarote, Spain by MPC arquitectos (designed using AutoCAD)

Thursday, October 20th, 2011

Article source: MPC arquitectos

This reform Project for the existing Güime Civic Center (CCGU) is located in the Municipality of San Bartolomé in Lanzarote Island, Spain. The facility is located in a site of 2217m2 with an ‘L’ shape and oriented N-S in its longitudinal configuration.

Exterior View (Images Courtesy Jin Taira)

  • Architects: MPC arquitectos – Vicente Mirallave, Flora Pescador, Ángel Casas, Jin Taira
  • Name of Project: Rehabilitation of a Civic Center in Lanzarote
  • Location: Güime, Lanzarote Island, Spain
  • Collaborator: Santiago González (architect)
  • Structure: Lain Ingenieros Consultores+ ryg arquitectos
  • Photographs: Jin Taira
  • Software used: AutoCAD


House in Leiria, Portugal by ARX (designed using AutoCAD)

Thursday, October 20th, 2011

Article source: ARX

The house is located in a “typical” peripheric urbanization of Pousos, a parish of the municipality of Leiria. Situated east of the city and at high ground, it works as a sort of panoramic belvedere over Leiria.  So as to assure for more space and complete access to the faraway view, the owners bought the three lots ahead, over the “cliff”.

Image Courtesy FG+SG

  • Architects: ARX PORTUGAL, Arquitectos Lda.
  • Project: House in Leiria
  • Location: Leiria, Portugal
  • Project Date: 2006 – 07
  • Construction: 2008 – 09
  • Project Team: Sofia Raposo, Bruno Gonçalves, Pedro Jesus
  • Engineering: SAFRE, Projectos e Estudos de Engenharia Lda.
  • Photography: ARX
  • Gross Construction Surface: 1010  m2
  • Software used: AutoCAD


Stay Residence in Shinagawa, Japan by Studio Loop

Thursday, October 20th, 2011

Article source: Studio Loop

The 3 story house is located on a typical dense residential area in Tokyo and designed for a family with a newborn baby.  The 4.5m(15ft.) wide and 13.5m(45ft.) long narrow site was provided and sandwiched between 3-story houses.  The family requested following programs; a parking space, a powder room close to a master bedroom, two study rooms for a couple, a living room sharing a Japanese room for a housework, a pantry space for kitchen, a roof terrace, and lots of daylights and winds through space.

Image Courtesy Kai Nakamura

  • Architects: Studio Loop
  • Project: Stay Residence
  • Location:Shinagawa, Tokyo, Japan
  • Project Year: 2009-2010
  • Program: Residential
  • Structure: Wood Construction
  • Software used: vectorworks, autocad, 3dsmax for 3d rendering and photoshop for editing.


Social Incubating Center in Seoul, Republic of Korea by Hyunjoon Yoo Architects (designed using AutoCAD)

Wednesday, October 19th, 2011


This office is a social incubating center for venture businessmen. It is sponsored by the nonprofit organization Working Together Association. Anybody who wants to start their own business can apply for geting a space at this center. The Working Together Association supply the office space and free consulting for six months until they can start their own business. The initiating person starts from the open office area with couple of members. Once they get more detailed business plan, the team move to the individual cell office.

Interior View

  • Architect: Hyunjoon Yoo Architects
  • Name of Project: Social Incubating Center
  • Location: Seoul, Republic of Korea
  • Team: HyunjoonYoo, Yeongseop Yoon
  • Project Year: 2011
  • Project Area: 680 sqm
  • Software used: AutoCAD


GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley: YII 2016
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy