Archive for the ‘Autocad’ Category
Sunday, May 17th, 2015
Article source: Delution Architect
BDDO is an agency engaged in the field of large-scale Global advertising based in New York. When this project tendering brief began, the client wanted a very different and dynamic office shades which can provoke creative ideas from the employees. Thus we made a very unique, eye-catching and philosophically creative design that is applied to almost all the elements in the interior design of this Indonesia BBDO Office. Starting from the work table, floor, furniture, lights, doors, wall elements, to the lighting concept, each area has a unique and different lighting concept with warm white tone.
Image Courtesy © Fernando Gomulya
- Architects: Delution Architect
- Project: BBDO Indonesia Office
- Location: Kota Kasablanca, Office 88, South Jakarta, Indonesia
- Photography: Fernando Gomulya
- Software used: Sketchup and AutoCAD
- Staff Table Designer: MISC Indonesia
- Project Type: Interior Office
- Principal Designer: Muhammad Egha ST, Hezby Ryandi ST, Sunjaya Askaria ST, Fahmy Desrizal ST
- Interior Designer: Delution Architect (more…)
Wednesday, May 13th, 2015
Article source: Eduardo Souto de Moura / Adriano Pimenta
This project consists of 27 single-family dwellings built under a controlled-price regime, and the basic aim was therefore to optimize its costs effectiveness. The design seeks to enhance the versatility of uses and subsequent potential modifications to the physical features of the spaces.
Image Courtesy © Luis Ferreira Alves
- Architects: Eduardo Souto de Moura / Adriano Pimenta
- Project: 27 DWELLINGS IN SETE CIDADES
- Location: Lagoa das Sete Cidades, Portugal
- Photography: Luis Ferreira Alves
- Software used: Autocad
- Client: Região Autónoma dos Açores – Secretaria Regional da Habitação e Equipamentos, Direcção Regional da Habitação
- Houses Promotor: AFAVIAS Engenharia e Construções
- Colaborators: Ana Ferreira, Carolina Salcedo, Maria Vasconcelos, Tiago Coelho
- Landscape: ARQT.OF
- Structural Consultants: AFA CONSULT
- Electrical Consultants: AFA CONSULT
- Mechanical Consultants: AFA CONSULT
- General Contractor: Allotment – Couto & Couto, Houses – AFAVIAS Engenharia e Construções
Thursday, May 7th, 2015
Article source: BO LANDSCAPE
About two weeks after construction was complete on the Rakafot School, for which we were the landscape architects, and the opening of the school year, we received a surprising phone call: “I wanted your opinion on adding frogs to the school’s ‘Winter Pond.’ It was the agriculture teacher “We received complaints about mosquitoes, and it seems to be the right way to stop them is by using frogs. Besides, it will be wonderful to hear their croaks along with the children’s loud and cheerful voices.” “It’s a great idea,” we hastened to assure her, with a fantastic inner feeling, “yes, that works.”
Image Courtesy © Amit Haas
- Architects: Knafo-Klimor Architects
- Landscape Architects: BO- Landscape Architects: Landscape Arch. Orna Ben-Ziony& Landscape Arch. Beeri Ben-Shalom, partners/owners of. Associate designer: Landscape Arch. IditIsrael.
- Project: Rakafot school grounds
- Location: Kiryat Bialik, Israel
- Photography: Amit Haas
- Software used: Autocad & Sketchup
- Developer: Kiryat Bialik Municipality, Engineering Head Department: Landscape Arch. Noam Massad, Israel.
- Development contractor: Hisham Khmeisi, Hisham Group.
- Project management and supervision: Shirley Gazit and Gonen Pinhas, Nativ Engineering and Management Ltd.
Thursday, May 7th, 2015
Article source: TAAV Arquitectos
The building is located within a manufacturing plant, in that context; it situates a testing laboratory and an exhibition space.
The design seeks to establish an emphasis between the new construction and the existing facilities. The result is a solid and sleek object that distinguishes from its spatial context by the use of a dynamic geometry.
Image Courtesy © Studio KM
- Architects: TAAV Arquitectos
- Project: Dickies Showroom
- Location: Parras de la Fuente, Mexico
- Photography: Studio KM
- Software used: AutoCAD, SketchUp, Arlantis, Photoshop and Illustrator
- Design Team: Aldo Villarreal, Mario Flores, Antonio Flores, Alfredo Lopez, Julio Ramirez
- Construction: Constructora CONCRETA
- Area: 110 square meters
- Project Year: 2014
Thursday, May 7th, 2015
Article source: CCM2 architectes + Onico Architecture
Located in the center of the town Stoneham, surrounded by a mountainous and wooden environment, the new pavilion of the elementary school of Stoneham-Tewkesbury is built near the existing one. The new school can accommodate an extra of 240 students in order to fill the growing needs of the municipality. The Municipality’s expansion is caused by the arrival of young families in the new residential developments. The pavilion regroups fourteen classrooms, a library, a gymnasium, a computer laboratory, a daycare and all the services related to maximize the development and the global learning of the children.
Image Courtesy © Stéphane Groleau
- Architects: CCM2 architectes + Onico Architecture
- Project: HARFANG-DES-NEIGES PRIMARY SCHOOL
- Location: Stoneham, Québec, Canada
- Photography: Stéphane Groleau + Dave Tremblay
- Software used: FormZ and AutoCad
- Completion: 2013
- Client: Commission scolaire des Premières-Seigneuries
- Structural / Civil: WSP Group
- Mechanical /Electrical: Genecor inc.
- Contractor: Constructions Béland-Lapointe inc.
- Project Area: 30 730 pi2 | 12 855 m2
- Budget: 6,5 M$ | CAN
Wednesday, May 6th, 2015
Article source: Burobill
Architecture and music share a mathematical principle : the golden section.This principle is used to arrange and order the existing house as a spine running through it.The music room was designed and constructed from scratch using the golden section as a tool to design the facades, the plan, the height of the ceiling, the section of the beams etcetera…All elements of the music chamber are generated by the same principle.
Image Courtesy © Nick Van Goubergen
- Architects: Burobill
- Project: Section
- Location: Hoogstraten, Belgium
- Photography: Nick Van Goubergen
- Year of completion: 2012
- Software used: Sketchup, Autocad, Vectorworks
Wednesday, May 6th, 2015
Article source: Arch Js
Introducing itself to the local market in the early 90’s, Nino has developed a reputation for its sleek and funky interiors. Arch JS was provided the task of re branding and redesigning Nino’s future branches to meet the contemporary market today.
Image Courtesy © Nelson Garrido
- Architects: Arch Js
- Project: NINO Restaurant
- Location: Arabella food court, Al Bidaa area, KUWAIT
- Photography: Nelson Garrido
- Software used: AutoCAD & 3ds Max
- Construction year: 2014
- Built area: 480m2
- Collaborators: Contractors – International Interiors contracting co.
Sunday, May 3rd, 2015
Article source: Selim Senin
The Calgary CMA is home to the second most corporate head offices in Canada among the country’s 800 largest corporations.Many employees are outside feels the need to use the computer.In a quiet environment outside the company must work (sending mail, prepare presentations, video conference etc).In case you can not reach the company immediately tries to deal with this in the corner cafe.Short-term is difficult to find a quiet environment.Come to work in this situation you can take care of business in the WORKING CLOUD single mini office.
Image Courtesy © Selim Senin
- Architects: Selim Senin
- Project: CALGARY WORKING CLOUD
- Location: Canada
- Software used: Autocad, Sketchup, Vray, Photoshop
Friday, May 1st, 2015
Article source: Lab32 architecten
This villa in the Dutch village of Haelen was built for a couple with a child. It resides on the grounds of an out-dated ninety sixties bungalow. The villa anticipates the family’s love for outdoor living. The box shaped part of the villa seems to float above the sloping landscape. On both sides, it is fitted with windows that offer a panoramic view. The windows optimise the relationship between the in- and outdoor environment. They make both worlds transparent. The low-lying terrace is situated at the rear side of the villa and holds a swimming pool and koi pond. The terrace runs into the covered terrace. Both terraces strengthen the relationship between the in- and outdoor living space. The interior was designed in harmony with the villa. It perfectly fits the minimalist aesthetics the clients aspire. The austere and pure design was combined with warm materials. We designed everything and left nothing to chance. Because of this, we can truly say that the villa is like a tailor-made suit that offers optimal comfortable living.
Image Courtesy © Lab32 architecten
- Architects: Lab32 architecten
- Project: Contemporary Bungalow
- Location: Haelen, Netherlands
- Software used: Autocad, Autodesk
Thursday, April 30th, 2015
Article source: Murman arkitekter ab
This is a Sauna and relax building in Saltsjöbaden just outside Stockholm.
Saltsjöbaden community was founded in the 1890’s with the goal of creating a society close to nature following the example of central European spas, but near the nature and the sea with the possibility of boat and outdoor activities.
The villas built there was relatively large to fit the growing group of people with a good economy around the turn of the century.
Image Courtesy © Åke E-son Lindman
- Architects: Murman arkitekter ab, Hans Murman och Ulla Alberts, Frida Gustafsson
- Project: Sauna Saltsjöbaden
- Location: Saltsjöbaden, Sweden
- Photography: Åke E-son Lindman, Hans Murman
- Software used: AutoCAD
- Building complete: 2011