Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

1028 Natoma Street in CA, USA by Stanley Saitowitz / Natoma Architects

Thursday, July 24th, 2014

Article source: Stanley Saitowitz / Natoma Architects

This project, on a twenty-five-by-eighty-foot lot next to 1022 Natoma Street, continues the investigation of San Francisco infill buildings. At the street level are parking and entrance lobby; above are four stacked units. One thickened party wall provides vertical access and a light court. The other acts as a service zone, condensing kitchens, bathrooms, laundry, and storage behind sliding glass doors.

Image Courtesy © Stanley Saitowitz / Natoma Architects

Image Courtesy © Stanley Saitowitz / Natoma Architects

(more…)

Touguinhó II House in Vila do Conde, Portugal by Raulino SILVA ARCHITECT, Lda

Wednesday, July 23rd, 2014

Article source: Raulino SILVA ARCHITECT, Lda

If we climb through the narrow streets to the place called \”hill\” of the village Touguinhó, we can observe the sea from afar, near the town of Vila do Conde.

The implantation of the house took into account the local landscape and a significant slope of the terrain.

Image Courtesy ©  Raulino SILVA ARCHITECT, Lda

Image Courtesy © Raulino SILVA ARCHITECT, Lda

  • Architects: Raulino SILVA ARCHITECT, Lda
  • Project: Touguinhó II House
  • Location: Vila do Conde, Portugal
  • Photography: Raulino SILVA ARCHITECT, Lda
  • Software used: AUTOCAD LT 2013
  • Engineering: Engave – Engenharia
  • Construction: Silfermat, Lda

(more…)

4 Springs Lane in Rappahannock County, VA by Robert M. Gurney, FAIA Architect

Wednesday, July 23rd, 2014

Article source: Robert M. Gurney, FAIA Architect 

Rolling topography, open fields and woodlands comprise a 24 acre site in Rappahannock County, Virginia where this new house is located. Extensive site investigation, including erecting scaffolding at various locations, resulted in the placement of the house high on one of the hills, overlooking a meadow at the base of woodlands.  The house is organized as a series of volumes, arranged linearly and positioned to optimize distant views of the Blue Ridge Mountains.

Image Courtesy ©  Maxwell MacKenzie

Image Courtesy © Maxwell MacKenzie

  • Architects: Robert M. Gurney, FAIA Architect
  • Project: 4 Springs Lane
  • Location: Rappahannock County, VA, U.S.A
  • Photography: Maxwell MacKenzie
  • Software used: Autocad, SketchUp, and Photoshop 
  • Project Architect: Brian Tuskey
  • Contractor: Erwin Opitz, Opitz Construction Consulting, Inc.
  • Engineer: D. Anthony Beale LLC
  • Landscape Architect: Kevin Campion, Campion Hruby Landscape Architects
  • Interior Designer: Therese Baron Gurney, ASID – Baron Gurney Interiors
  • Completion Year: 2013

(more…)

ARTIAGOITIA HOUSE in Santiago, Chile by Raimundo Anguita

Wednesday, July 23rd, 2014

Article source: Raimundo Anguita

The area is located in Vitacura’s commune, in a residential zone of the 80s where it has begun a renovation of the constructions The order consisted of a modern house for a large family

Image Courtesy © Oliver Yaneza

Image Courtesy © Oliver Yaneza

  • Architects: Raimundo Anguita
  • Project: ARTIAGOITIA HOUSE
  • Location: Santiago, Chile
  • Photography: Oliver Yaneza
  • Software used: Auto cad
  • Design year: 2010
  • Construction year: from 2011 to 2012
  • Site area: 1100 m2
  • Building area: 260 m2
  • Total floor area: 440 m2

(more…)

Wavehouse (400 Grove) in Hayes Valley, San Francisco by Fougeron Architecture

Saturday, May 24th, 2014

Article source: Fougeron Architecture

400 Grove Street/Parcel H is a 33-unit market-rate development in the heart of Hayes Valley. This prominent site at the corner of Grove and Gough Streets is one of the parcels left vacant by the demolition of the Central Freeway, and is in a dynamic, urban San Francisco neighborhood.

Image Courtesy © Fougeron Architecture

Image Courtesy © Fougeron Architecture

  • Architects: Fougeron Architecture
  • Project: Wavehouse (400 Grove)
  • Location: Hayes Valley, San Francisco
  •  Software used:  Rhino and AutoCad.

(more…)

Casa 7A in Villeta, Colombia by Arquitectura en Estudio + Natalia Heredia

Friday, May 23rd, 2014

Article source: Arquitectura en Estudio + Natalia Heredia

The challenge was to design a country house in the surroundings of the town of Villeta (Colombia), 1.5 hours to the west of Bogotá; at 967 meters above sea level, with a predominantly hot and dry weather all year round. The site’s constraints were very clear; a very steep land that starts at the top of a hill going all the way down to the stream “El Cojo”. The brief asked for a built area of 550m2, including 3 rooms, studio, service and social areas, a terrace and a swimming pool, all this under one essential demand: the house must be able to be completely closed whenever it’s not in use.

Image Courtesy © David Uribe

Image Courtesy © David Uribe

  • Architects: Arquitectura en Estudio + Natalia Heredia
  • Project: Casa 7A
  • Location: Villeta, Colombia
  • Photography: David Uribe
  • Software used: Autocad and 3d sketchup model
  • Design team: Carlos Nuñez, talia Heredia
  • Designed and built: 2012 – 2014
  • End of construction: January 2014
  • Area: 550 m2

(more…)

Apartment Refurbishment in Lisbon, Portugal by Henrique Barros-Gomes

Friday, May 23rd, 2014

Article source: Henrique Barros-Gomes

Complete refurbishment of a late 60´s apartment in Lisbon.

Facing 3 streets, the apartment has great sun exposure and nice views to the surrounding areas. However, its original condition showed a very spacious, but also poorly divided and unbalanced interior, with many partitions, resulting in a needlessly intricate and dark plan. Social and private areas arrangement did not make much sense either – It was felt from the first moment that the house would gain if its organization was completely reversed. Nevertheless, it was a solid construction with a generous ceiling height, and great potential for intervention.

Image Courtesy © Henrique Barros-Gomes

Image Courtesy © Henrique Barros-Gomes

  • Architects: Henrique Barros-Gomes
  • Project: Apartment Refurbishment
  • Location: Lisbon, Portugal
  • Photography: Henrique Barros-Gomes
  • Software used: CAD software
  • Date of project: 2013
  • Date of completion: 2013
  • Status: Built
  • Built Area: 210m2
  • Construction: A Renovadora

(more…)

Nihat Bey Apartment Building by MANCO ARCHITECTS INC.

Friday, May 23rd, 2014

Article source: MANCO ARCHITECTS INC.

The project was designed to reconstruct Nihat Bey Apartment proven to be not structurally resistant against an earthquake and needs to be demolished according to the Urban Regeneration Law.

Each one of the 12 units to be included in the new building were individually designed according to the special needs of their owners.

Image Courtesy © MANCO ARCHITECTS INC.

Image Courtesy © MANCO ARCHITECTS INC.

  • Architects: MANCO ARCHITECTS INC.
  • Project: Nihat Bey Apartment Building
  • Software used: AutoCAD LT, SketchUp and V-Ray

(more…)

Union Square Loft in New York by Paul Cha Architect

Thursday, May 22nd, 2014

Article source: Paul Cha Architect

Located in the bustling Union Square area, the 2500 SF trapezoid shaped loft is housed in a former department store, with original cast iron columns and tin ceilings. The client, an educational consultant, requested a tranquil residence for daily living as well as receiving frequent guests.

Image Courtesy © Paul Cha Architect

Image Courtesy © Paul Cha Architect

  • Architects: Paul Cha Architect (Ali Koluman)
  • Project: Union Square Loft
  • Location: New York, USA
  • Software used: Autocad.
  • Material: Cherry wood(cabinetry), granite slab in absolute black honed finish(kitchen counter) & milk glass

(more…)

“SANTA MADRONA” – 62 SOCIAL DWELLINGS in Barcelona, Spain by PICHARCHITECTS

Friday, May 16th, 2014

Article source: PICHARCHITECTS

The project of  “Santa Madrona” deals with an urban space, where two apartment blocks with an affordable renting price have to be placed, nearby a small public square of the Gracia neighbourhood of Barcelona. The intervention had to place also, a public equipment on its ground floor, with a specific area and  some specific leisure spaces. So then, the project had this interesting challenge to propose in one hand apartment blocks with an affordable renting price, with all the facilities that were needed, an urban space intimately bounded to the block’s life and an equipment that will promote the so necessary mixture of uses.

Image Courtesy © Simón García

Image Courtesy © Simón García

  • Architects: PICHARCHITECTS
  • Project: SANTA MADRONA”. 62 SOCIAL DWELLINGS
  • Location: Barcelona, Spain
  • Photography: Simón García
  • Software used: AUTOCAD
  • Volume of the construction: 5.704,10 m²
  • Final Cost: 3.106.091,92€
  • Authors: Felip Pich-Aguilera Baurier and Teresa Batlle i Pagès. Architects.
  • Group Directors: Angel Sendarrubias. Pau Casaldáliga
  • Project Director: Ute Müncheberg
  • Specialists: INDAGSA, structure. RP GRUP, facilities. GPCAT, measurements and estimates.
  • Building company: INBISA

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon
Graphisoft ARCHICAD  Download a 30-Day FREE trial
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy