Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Mother & Child welfare center in Paris, France by Rh+ architecture

Sunday, October 26th, 2014

Article source: Rh+ architecture

The project is located in the south of Paris, in a small curved street, surrounded by historical and typical french buildings of the industrial period. The low density of the neighborhood, the street shape in addition to a 2.5m difference in height give the impression of a small provincial town. In fact, the curve of the Gustave Geoffroy street gives this execeptional site several constraints that have to be used to generate a well-integrated project to its urban fabric.

Image Courtesy © Luc Boegly

Image Courtesy © Luc Boegly

  • Architects: Rh+ architecture
  • Project: Mother & Child welfare center
  • Location: 17 Gustave Geffroy street, Paris 13th arrondissement, France
  • Photography: Luc Boegly
  • Software used: Autocad for the 2D drawings and the Adobe photoshop and Indesign 
  • Contracting authority: Ville de Paris
  • Cost: 5 400 000€ HT
  • Surface: 1800m²
  • Year: mars 2014
  • Project team: 
  • Eng. all trad and economists: Betom
  • Eng. HQE: Cap Terre
  • Building contractors: Capaldi Construction
  • Environnement: Certification Habitat & Environnement, Profi l A + BBC Effi nergie, Consommation 45 kWh/m² shon.an

(more…)

Unboxed – 100% recycable prefab wooden house in Polignano a Mare Town, Italy by Barberio Colella ARC

Friday, October 24th, 2014

Article source: Barberio Colella ARC

Description: “Unboxed”, designed by Micaela Colella and Maurizio Barberio, is the wooden transposition of the typical characters of the Mediterranean house, as a valid alternative to masonry or frame structure buildings. The house is think to be placed in the beautiful town of Polignano a Mare, Apulia. The high standardization of the modules and their total prefabrication, allow to study various solutions easily. This goal is achieved by splitting the building in several basic structural elements designed to be mounted with all the finishes and without thermal bridges. The house is 100% recyclable. It is also completely removable – thus movable – thanks to an innovative foundation made of steel, which allows to reduce or eliminate the excavation. A low inclination roof on the top (5%) allows the installation of solar roof tiles (Tegosolar technology), capable of producing electricity and heat. The house has a clear division between the living and the sleeping area with a glazed corridor/entrance in the middle: a journey in the nature, able to re-establish the contact with the surrounding environment (flow of time) at each passage.

Image Courtesy © Micaela Colella

Image Courtesy © Micaela Colella and Maurizio Barberio

  • Architects: Barberio Colella ARC
  • Project: Unboxed
  • Location: Polignano a Mare Town, Italy
  • Photography: Micaela Colella, Maurizio Barberio
  • Software used:
    • Desing: Autocad and Rhinoceros
    • Rendering: Vray for Rhino and Photoshop
  • Credits: Micaela Colella (Project Leader), Maurizio Barberio (Principal Architect)

(more…)

CHEGS CAMPUS CANTEEN in Baoding, China by KNOWSPACE

Friday, October 24th, 2014

Article source: KNOWSPACE

The reorganization of the Center for Hydro-geology and Environmental Geology Survey’s campus includes several different interventions in 2 phases: phase 1 comprises of a 2-storey canteen and activity center building and the renovation of the doorman house, while phase 2 includes a 10-storey laboratory building and the refurbishment of the office building facade from the 1980s.

Image Courtesy © Lv Hengzhong

Image Courtesy © Lv Hengzhong

  • Architects: KNOWSPACE
  • Project: CHEGS CAMPUS CANTEEN
  • Location: Baoding, China
  • Photography: Lv Hengzhong
  • Software used: AutoCAD
  • Client: Center for Hydrogeology and Environmental Geology Survey (CHEGS), Baoding
  • Consultants: Baoding Institute for Architecture Design Co., Ltd (Structure, HVAC and site supervision)
  • Area: 660 m2 GFA
  • Time: 2012-2014

(more…)

ZA’ABEEL PARK OBSERVATION TOWER in Dubai by XTEN Architecture

Wednesday, October 22nd, 2014

Article source: XTEN Architecture

This project is for a recent competition organized by ThyssenKrupp Elevator for the creation of an Observation Tower located in a cultural park just off axis from the main skyscraper boulevard in Dubai, Sheikh Khalifa Bin Zayed Road.

Image Courtesy © XTEN Architecture

Image Courtesy © XTEN Architecture

  • Architects: XTEN Architecture
  • Project: ZA’ABEEL PARK OBSERVATION TOWER
  • Location: Dubai
  • Software used: We model in Rhino, and render in Maxwell. Drawings are in AutoCad.
  • Team: Austin Kelly AIA, Monika Haefelfinger, Scott Utterstrom, Jae Rodriguez, Dana Nishimura Bryan, Stephanie Sent
  • Landscape: Coen + Partners – Shane Coen, Stephanie Grotta, Bryan Kramer, Travis VanLiere
  • Structural Engineering: Thornton Tomasetti – Steve Ratchye PE SE, senior associate

(more…)

Izakaya Kinoya in Montréal, Canada by Jean de Lessard

Wednesday, October 22nd, 2014

Article source: Jean de Lessard

For its latest Kinoya, interior designer Jean de Lessard has tapped into the sources to emulate in his design the primary spirit, function and aesthetics of the izakaya[1], as the latter was originally an informal place where people drank beer and sake. The transformation is particularly unusual that it explores through extreme design  intimacy in relationships between people, making of Kinoya a true representation of the unique approach the designer has developed about the different ways of occupying a space.

Image Courtesy © Adrien Williams

Image Courtesy © Adrien Williams

  • Architects: Jean de Lessard
  • Project: Izakaya Kinoya
  • Location: Montréal, Canada
  • Photography: Adrien Williams
  • Software used: Autocad and 3D max
  • Client: Kinoya
  • General contractor: Pure Renovation
  • Woodworking: Dominic Samson, Solution durable
  • Overall surface area: 1,500 square feet (23 feet x 75 feet)
  • Dining area surface: around 800 square feet
  • Capacity: 60 places

(more…)

Komachi Building in Tokyo, JAPAN by Akira Koyama + KEY OPERATION INC.

Friday, October 17th, 2014

Article source: Akira Koyama + KEY OPERATION INC.

Facing a street near the JR Ebisu Station circle, the property is a restaurant building principally envisioned for tenants purveying Japanese cuisine. A compact lot of 76 m2 called for securing the most possible tenant floor space. The sky occupancy factor, which would limitthe permitted obstruction of visible sky from land around the lot, was utilized in a study to determine how to gain the most cubic volume for a building. Consequently, the building configuration was set at six levels: tenant space of 48 m2 per level up to the fourth floor with a setback of 50 cm, andan additional setback for the fifth and sixth floors.

Image Courtesy © Akira Koyama + KEY OPERATION INC.

Image Courtesy © Akira Koyama + KEY OPERATION INC.

  • Architects: Akira Koyama + KEY OPERATION INC.
  • Project: Komachi Building
  • Location: Shibuya-ku, Tokyo, JAPAN
  • Software used: AutoCAD
  • Client∕Developer: Time Zone Limited.
  • Construction: Kuboco
  • Site Area: 76.30 m2
  • Construct Area: 50.57 m2
  • Gross Floor Area: 258.51 m2

(more…)

ZAC du Coteau in Arcueil, France by ECDM Architectes

Saturday, October 11th, 2014

Article source: ECDM Architectes  The idea was to extend the surface of the apartments by balconies representing a minima 50% of the living area with a drastic construction cost : 1350 € / sq.m. The project implements objective values where all the constructive and architectural aspects are drafted for their practical value and their economic performance.

Image Courtesy © M. Benoit Fougeirol

Image Courtesy © M. Benoit Fougeirol

  • Architects: ECDM Architectes
  • Project: ZAC du Coteau
  • Location: Arcueil, France
  • Photography: M. Benoit Fougeirol
  • Software used: Autocad

(more…)

V HOUSE in Puerta Plata Zapopan, Jalisco, México by Agraz Arquitectos

Thursday, October 9th, 2014

Article source: Agraz Arquitectos

The first child of this young family was born while this house was under construction making it the place where all the strategies the firm has come up to, took place. The project is developed in three levels, using the basement as garage, for man must be above automobiles at all times. This cellar is also the place for storerooms, equipment and service rooms, allowing the existence of these two alternate worlds for the dwellers.

Image Courtesy © Mito Covarrubias

Image Courtesy © Mito Covarrubias

  • Architects: Agraz Arquitectos/ Ricardo Agraz
  • Project: V HOUSE
  • Location: Puerta Plata Zapopan, Jalisco, México
  • Photography: Mito Covarrubias
  • Software used: 
    • Autocad – floor plans
    • Skethcup -3d model
    • 3dMax – render
  • Date: Project: 2011
  • Construction: 2013
  • Manager project: Brenda Barron
  • Collaborators: Juan Antonio Jaime, Humberto Dueñas, Blanca Moreno, Miguel Sánchez, Marc Steven Fernández, Javier H. Aguirre, Gabriela Villarreal, Javier Gutiérrez, Erick Martínez, Jessica Magaña, Gabriel Gómez, Fernanda Palma,
  • Construction: Arq. Rubén Álvarez Alfaro
  • Renders: RM3 Studio
  • Site area: 416.24 m2
  • Construction area: 354.21 m2

(more…)

Entre Deux Rives in L’Île-Saint-Denis, France by PHILIPPON – KALT

Wednesday, October 8th, 2014

Article source: PHILIPPON – KALT

The Entre Deux Rives housing project, developed by the agency Philippon-Kalt, announces the start of the new Ile-Saint-Denis riverside green neighbourhood. The development will revitalize a former industrial wasteland. It includes 165 homes in 8 buildings ranging from 3 and 7 floors, spread over 3 small blocks.

Image Courtesy © Hervé Abbadie

Image Courtesy © Hervé Abbadie

  • Architects: PHILIPPON – KALT
  • Project: Entre Deux Rives
  • Location: 7 Quai du Chatelier, 93450 L’Île-Saint-Denis
  • Photography: Hervé Abbadie
  • Software used: AUTOCAD
  • Client: ICADE
  • Social housing: CAPS
  • Thermal engineering consultant: ALTO
  • Engineering consultant: LGX
  • Total area: 11 100 m² SP/12 200 m² SHON
  • Cost: 16,5 M€ HT
  • Architectural Project: 2008
  • Work in two stages: July 2011 to March 2014

(more…)

TherMitte by Nissen & Wentzlaff Architects BSA SIA AG

Wednesday, October 1st, 2014

Article source:  Nissen & Wentzlaff Architects BSA SIA AG

Competition, 2004 – first place: There are three structures: a four-storey residential building along the Hauptstrasse, with a walkway which reduces noise levels, a separate structure within this unit to house the banking premises, and a three-storey residential unit parallel to the first at the rear of the plot. This layout creates an internal courtyard, which can be accessed through two generous entrances from the two neighboring streets, which also serve as entrances to the residential units behind and to the services housed on the ground floor. The buildings are enclosed in wooden latticework, creating a filigreed and calm membrane between the internal and external spaces.

Image Courtesy © Nissen & Wentzlaff Architekten

Image Courtesy © Nissen & Wentzlaff Architekten

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise