Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Flower Power in Sydney, Australia by Lacoste+Stevenson Architects

Wednesday, August 24th, 2016

Article source: Lacoste+Stevenson Architects

The refurbishment of the Reg Bartley Oval Grandstand required restoration of the existing grandstand and the construction of new public amenities and ground staff facilities. The brief included demolition of three buildings that surrounded and attached to the grandstand, cutting it off from the street and parkland behind.

Image Courtesy © Brett Boardman

Image Courtesy © Brett Boardman

  • Architects: Lacoste+Stevenson Architects
  • Project: Flower Power
  • Location: Sydney, Australia
  • Photography: Brett Boardman
  • Software used: AutoCAD

(more…)

Masseria Moroseta in Ostuni, Italy by Andrew Trotter

Sunday, August 21st, 2016

Article source: Andrew Trotter 

Masseria Moroseta: a white stone farmhouse standing proudly on the ridge with views across the olive trees to the sea.

Built using traditional techniques and local materials, the modern architecture is influenced by masserie (farmhouses) of the past. Set in five hectares of olive groves with trees up to 500 years old, Masseria Moroseta is an enclave of pared-down relaxation and rural simplicity.

Image Courtesy © Salva Lopez

Image Courtesy © Salva Lopez

  • Architects: Andrew Trotter
  • Project: Masseria Moroseta
  • Location: Ostuni, Italy
  • Photography: Salva Lopez
  • Software used: Autocad

(more…)

Zilker Residences in Austin, Texas by Clark Rrichardson Architects

Friday, August 19th, 2016

Article source: Clark Rrichardson Architects

This contemporary architectural design, located just blocks from the Barton Springs Pool and the Umlauf Sculpture Garden, features two residences in the heart of Austin’s Zilker Neighborhood. Both units open out to private landscaped interior courtyards as well as second floor balconies with views to downtown. The exterior material palette consists of a vertical standing seam siding contrasted against a white washed, vertical cypress tongue and groove siding.  The rear unit is the builder / developer, Tim Mccabe’s own residence featuring prints from noted photographer David Hume Kennerly and sculpture from his travels in Asia as the development manager for the Pero Family in Dallas.  Tim’s brings his sensibilities from living in Dallas in cannonical modern urban residences by the likes Bud Oblesby and Frank Welch of the O’Neil Ford School here to Austin’s own growing modern tradition.  The building as a whole is a focused on elegant, urban living through a simple edited material palette, amazing framed views to the Zilker’s mature tree canopy and ample outdoor gathering spaces.

Image Courtesy © Bardagjy Photography, Paul Bardagjy

Image Courtesy © Bardagjy Photography, Paul Bardagjy

  • Architects: Clark Rrichardson Architects
  • Project: Zilker Residences
  • Location: Austin, Texas, USA
  • Photography: Bardagjy Photography, Paul Bardagjy
  • Software used: Autocad 2015, Sketchup Pro and Maxwell Render
  • Project Team: Edward Richardson and April Clark
  • Builder: McCabe Development, Tim McCabe
  • Project Area: 3615 SF
  • Completed: May of 2015

(more…)

Cottage Restoration in Parma, Italy by Studio Contini

Wednesday, August 17th, 2016

Article source: Studio Contini

This construction is located in Tufi d’Agna, a small settlement in the mountain town of Corniglio, inside of the Tuscan-Emilian Appenine recently recognized by the UNESCO as a MAB (Man and the Biosphere Programme) reserve.

The small building, a farm building once used to shelter the shepherds and animals, was recovered as a refuge where the residential use, considering the remote location and the difficulties to achieve it, is sporadic and linked to the summer period.

Image Courtesy © Sandro Tessoni, Alessio Brugnoli, Rosi Filippo, Juza

Image Courtesy © Sandro Tessoni, Alessio Brugnoli, Rosi Filippo, Juza

  • Architects: Studio Contini (Marco Contini)
  • Project: Cottage Restoration
  • Location: Tufi d’Agna di Corniglio, Parma, Italy
  • Photography: Sandro Tessoni, Alessio Brugnoli, Rosi Filippo, Juza
  • Renders: Artlantis Studio
  • Software used: Autocad, Google SketchUp
  • Collaborators: Sara Chiari, Matteo Zaccarelli
  • Structure: Ing. Simone Leoni
  • Photovoltaic system: Aleo
  • Mechanical systems: CD Studio
  • Contracting companies: Impresa edile Barbieri Danilo; Aleo solar
  • Covered area: 68.0 sqm
  • Project: 2014
  • End of works: 2015

(more…)

Arvindh and Priya’s house in Bangalore, India by Biome Environmental Solutions Pvt.Ltd.

Tuesday, August 16th, 2016

Article source: Biome Environmental Solutions Pvt.Ltd.

The house sits in the context of a densely built residential area in North Bangalore. A substantial area of the plot along the road edge is occupied by the expansive canopy of a beautiful African Tulip.

The design takes the tree into consideration at every stage in an attempt to unite it with the built space, factoring in daylight and ventilation. The resulting home is marked by a sedate atmosphere, hints of the tree and the sky mingling with sober earth walls, which then contrast with oxide floors and painted steel windows.

Image Courtesy © Vivek Muthuramalingam

Image Courtesy © Vivek Muthuramalingam

  • Architects: Biome Environmental Solutions Pvt.Ltd.
  • Project: Arvindh and Priya’s house
  • Location: Sahakaranagar, Bangalore, India
  • Photography: Vivek Muthuramalingam
  • Softwares used: Autocad, Google sketchup
  • Design Team: Sharath Nayak, Maitri Dore, Ramya Ramesh, Sayan Chaterjee, Sukhraj Singh Sehgal
  • Consultants: Mesha Structural Consultants
  • Contractors: Ranganath.L
  • Site Area: 111.52 sqm
  • Built up Area: 119.61 sqm
  • Year of completion: 2016
  • Status: Built

(more…)

Monverde in Amarante, Portugal by FCC Arquitectura + Paulo Lobo

Sunday, August 14th, 2016

Article source: FCC Arquitectura

The project aimed to adapt the space that Quinta da Lixa uses to produce wine through the construction of a Rural Hotel devoted to wine tourism.

Image Courtesy © Fernando Guerra | FG+SG

Image Courtesy © Fernando Guerra | FG+SG

  • Architects: FCC Arquitectura + Paulo Lobo
  • Project: Monverde
  • Location: Telões, Amarante, Portugal
  • Photography: Fernando Guerra | FG + SG
  • Software used: Autocad
  • General contractor: MC Meireles
  • Frames: Jofebar
  • Woods: José Nuno Carpintaria
  • Electricity: Costa Alves Electricidade
  • Avac: Pritérmica
  • Construction area: 5200 m²
  • Site: 30 Hectares
  • Project starts: May 2008
  • Starts of works: July 2012
  • End of the works: Jun 2015

(more…)

Mummy Mountain Residence in Paradise Valley, Arizona by Chen + Suchart Studio, LLC

Sunday, August 14th, 2016

Article source: Chen + Suchart Studio, LLC

The project proposes an architecture that responds to the inherent qualities of the site, privileged views, and the larger context of the Sonoran Desert.  The language of the house draws upon these inherencies and allows for a greater understanding of the project’s circumstances.

Image Courtesy © Bill Timmerman

Image Courtesy © Bill Timmerman

  • Architects: Chen + Suchart Studio, LLC (Szu-Ping Patricia Chen Suchart and Thamarit Suchart)
  • Project: Mummy Mountain Residence
  • Location: Paradise Valley, Arizona, USA
  • Photography: Bill Timmerman
  • Software used: AutoCAD 2005 and 3DS max 6
  • Structural Engineering:   AED Structural Engineers, Inc. – Christopher J. Sosnowski, P.E.
  • Construction Company: Cuff Custom Homes – Hugh Cuff
  • Construction Area: 3,968 sf or 368.64 sqm
  • Project Year: 2004 – 2008

(more…)

Mato in Oliveira de Azeméis, Portugal by Fcc arquitectura

Friday, August 12th, 2016

Article source: Fcc arquitectura 

Of the need for an exhibition space came the “MATO – Art Gallery”, next to Paulo Neves sculptor’s atelier.

Looking for inspiration in their own work of the sculptor, the organic design mirrors the trace of Paulo Neves. Whole body develops without straight surfaces. As if a strange animal has born on site, mixed with the surrounding vegetation.

Image Courtesy © Fernando Guerra | FG+SG

Image Courtesy © Fernando Guerra | FG+SG

  • Architects: Fcc arquitectura
  • Project: Mato
  • Location: Cucujães, Oliveira de Azeméis, Portugal
  • Photography: Fernando Guerra | FG+SG
  • Software used: Autocad, Revit, Photoshop
  • Main contractor: Vieira Construções
  • Structure: Serralharia M. Peixoto & Aires
  • Plasterboard: Jonitecto
  • Exterior coating: Revesnunes
  • Tint: Lacca
  • Construction area: 48 m²
  • Project: Dec. 2011
  • Starts of works: May 2012
  • End works: Jun 2012

(more…)

Nötkärnan in Göteborg, Sweden by Wingårdhs

Friday, August 12th, 2016

Article source: Wingårdhs

“Paradise is the term for a place of timeless harmony”

In Somalia a simple flue often means death. Especially if you are young or newborn. The death-rate among children is the highest in the world.

Sweden has a high influx of Somalian refugees.

Image Courtesy © Wingårdhs

Image Courtesy © Wingårdhs

  • Architects: Wingårdhs
  • Project: Nötkärnan
  • Location: Göteborg, Sweden
  • Software used: AutoCad, Photoshop, Vectoraster and Illustrator
  • Client: Nötkärnan Bergsjön Vc & Bvc AB
  • Total area in square meters: 1 580 m²
  • Completion date: May 2016

(more…)

CellaBar in Azores, Portugal by FCC Arquitectura + Paulo Lobo

Friday, August 12th, 2016

Article source: FCC Arquitectura

The building is the result of a regenerative transformation and expansion of a small pre-existing structure that had been abandoned for many years.

Image Courtesy © Fernando Guerra | FG+SG

Image Courtesy © Fernando Guerra | FG+SG

  • Architects: FCC Arquitectura + Paulo Lobo
  • Project: CellaBar
  • Location: Madalena, Pico, Azores, Portugal
  • Photography: Fernando Guerra | FG+SG
  • Software used: Revit, Autocad
  • General contractor: Esfalto Britas
  • Locksmithing: Estraga Ferro
  • Catering equipment: Arco Hotel
  • Construction area: 407 m²
  • Useful area: 322 m²
  • Project starts: August 2012
  • Starts of works: September 2013
  • End of the works: May 2015

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy