Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Marina Bay Cruise Centre Singapore by RSP Architects Planners & Engineers (Pte) Ltd

Tuesday, August 13th, 2013

Article source: RSP Architects Planners & Engineers (Pte) Ltd 

Marina Bay Cruise Centre Singapore (MBCCS) at Marine South, it is designed for operational efficiency to ensure a smooth and seamless visitor experience. The terminal has the facilities to accommodate the world’s largest cruise ships including Oasis-class vessel currently in service. The terminal building at 28300 m2, will have the ability to handle 6,800 cruise passengers at any one time, effectively doubling Singapore’s current berth capacity. The facilities included spacious arrival and departure halls and a large ground transportation area to efficiently and expeditiously process a large volume of passenger traffic expected.

Image Courtesy © RSP Architects Planners & Engineers (Pte) Ltd

Faux Pli – Spar in Gmunden, Austria by Archinauten Dworschak + Mühlbachler ZT Gmbh

Tuesday, August 13th, 2013

Article source: Archinauten Dworschak + Mühlbachler ZT Gmbh

the spar supermarket on the bank of the lake traunsee, in the center of the town of gmunden is to be enlarged. the expanded space results from a new design of the surrounding public space. an urban furnishing in the form of a “sunbed” presents a new attraction for the passers-by along the esplanade.

Image Courtesy © m.dworschak

  • Architects: Archinauten Dworschak + Mühlbachler ZT Gmbh
  • Project: Faux Pli – Spar
  • Location: Gmunden, Austria
  • Photography: m.dworschak
  • Building area: 1.033m²
  • Area of use: 680m²
  • Structural engineer: heintzel steinbichl & partner
  • Haustechnik: projectbureau plankenauer
  • Planning phase:  april,  juli 2012
  • Start of construction: september 2012 , dezember 2012
  • End of construction: dezember 2012
  • Software used: Autocad Architecture 2013

Westboro Home in Ottawa, Canada by Kariouk Associates

Saturday, August 10th, 2013

Article source: Kariouk Associates

DESIGN CHALLENGE:

The site for this home was a narrow lot in a downtown neighborhood, which carried with it extensive code limitations on side windows. A further challenge was negotiating the difference in grade between the two neighbouring lots:an already steeply sloping site, the neighbours to the West raised their rear yard an additional 1.5m, ultimately creating a difference in neighbouring lot heights of approximately 2.5m

Image Courtesy © John Kealey

  • Architects: Kariouk Associates
  • Project: Westboro Home
  • Location: Ottawa, Canada
  • Photography: John Kealey
  • DESIGN: Paul duBellet Kariouk (Principal), Chris Davis (Senior Design Associate), Sarah McMurtry (Design Associate), David King (Design Associate)
  • GENERAL CONTRACTOR: Westboro Homes (Nicholas Heins)
  • MILLWORK: Gruber Furniture (Robert Gruber)
  • LANDSCAPE: Empire Enterprises (Brad Beerwort)
  • PROJECT DATES: 2011-2013
  • Software used: Auto-Cad, Sketch-Up and Photoshop

Trish House in Yalding, England by Matthew Heywood

Saturday, August 10th, 2013

Article source: Matthew Heywood

The design of the house developed in direct response to the site and its location within the beautiful village of Yalding in Kent. The building’s structure is composed to reflect the surrounding woodland with the raking columns representing the irregular angles of tree trunks and branches. Large expanses of glass fill the gaps between the structure and allow you to appreciate the landscape and setting as if you were peering out from between the trunks and branches of the trees.

Image Courtesy © Matthew Heywood

  • Architects: Matthew Heywood
  • Project: Trish House Yalding
  • Location: Yalding, Kent, England
  • Engineer: Fothergill & Company
  • Main Contractor: Ecolibrium Solutions
  • Software used: Autocad LT and Rhino 3D

CHARGING STATIONS FOR ELECTRICAL VEHICLES in Gothenburg, Sweden by KKA Designs

Wednesday, August 7th, 2013

Article source: KJELLGREN KAMINSKY ARCHITECTURE 

More and more electrical vehicles travel the streets of Gothenburg, Sweden. Therefore the city asked KKA to design three charging stations serving electrical cars, bikes, mopeds and trucks. The loading stations should not only provide a practical function, they should also stand as symbols for a new more sustainable city.

Image Courtesy © KJELLGREN KAMINSKY ARCHITECTURE

  • Architects: KJELLGREN KAMINSKY ARCHITECTURE
  • Project: CHARGING STATIONS FOR ELECTRICAL VEHICLES
  • Location: Gothenburg, Sweden
  • Status: Idea
  • Kund: Gothenburg Traffic Office
  • Hållbart: Electric car, solar panels, sustainable materials
  • Program: Loading Station
  • Byggnadsinfo: Several places in the Gothenburg area
  • Team: Fredrik Kjellgren, Joakim Kaminsky, Helder Pinto, Kay Chang, Michele Pascucci
  • Software used: Autocad, 3ds Max, Sketchup and Photoshop

K11 Art Mall in Shanghai, China by Kokaistudios

Tuesday, August 6th, 2013

Article source: Kokaistudios

Kokaistudios is proud to announce the opening of the K11 Art Mall in June, 2013. Located in the heart of Shanghai’s central shopping street, Huai Hai Lu, this innovative commercial project has re-vitalized the podium levels of the landmark New World Tower, an icon of the 1990’s commercial renaissance of Shanghai.

Image Courtesy © Charlie Xia

  • Architects: Kokaistudios
  • Project: K11 Art Mall
  • Location: Shanghai, China
  • Photography: Charlie Xia
  • Client: New World Development
  • Designers: Andrea Destefanis, Filippo Gabbiani, Pietro Peyron, Li Wei, Carmen Lee, Wang Yun, Coco Cheng.
  • Complete: February, 2013(soft open), June, 2013(grand open)
  • Interior Gross Floor Area: Retail 35,500 sqm
  • Local Architect: Tong Ji Architecture Design Research Institute
  • LEED Consultant: Arup
  • Software used: AutoCAD

MEB Campus in Milas, Turkey by Tamirci Architects

Tuesday, August 6th, 2013

Article source: Tamirci Architects

In line with its new policies on pre-college education, Republic of Turkey’s Ministry of Education is planning to build 33 new campuses on various locations all around the country, with a capacity of approximately 12.000 students each. The plan is to combine a number of longstanding educational facilities in inner-cities that either expended their lifespan or don’t have the room for further expansion, and move them to designated sites on the periphery of the related towns.

Image Courtesy © Tamirci Architects

  • Architects: steb (studio evren başbuğ) +  Tamirci Architects
  • Project: MEB Campus in Milas
  • Location: Milas, Muğla , Turkey
  • Client: Ministry of Education
  • Construction Area: 110.000 sqm
  • Competition Date: December 2012 , May 2013
  • Project Team: Özlem Arvas, Düşra Korkmaz, Sezin Taner, Duygu Hevesli
  • Consultants: Assoc. Prof. Güven İncirlioğlu, Umut Başbuğ, Dilşad Kurtoğlu, Özcan Kaygısız
  • Software used: Autocad, Rhinoceros, 3dsmax, Vray and Photoshop

NYC Tower Proposal in South Street Seaport, New York by MA2

Saturday, August 3rd, 2013

Article source: MA2

The concept proposal is located in Manhattan’s South Street Seaport as an office tower with an adjacent parking structure. In its inception the tower is a product of preserving angles within a complex plane grid, which has been interfered by a Mobius geometric transformation. By manipulating a two-dimensional grid using asymptotic developments, it generates a series of automorphing patterns and higher dimensional structures.

Image Courtesy © MA2

  • Architects: MA2
  • Project: NYC Tower Proposal
  • Location: South Street Seaport, New York
  • Software used: Maya, Photoshop, Illustrator, AutoCAD

(more…)

KAMI SPA AT PARIOLI in Rome, Italy by CARLO BERARDUCCI ARCHITECTURE

Saturday, August 3rd, 2013

Article source: CARLO BERARDUCCI ARCHITECTURE

In the heart of the Parioli neighborhood in Rome, we are bringing to completion the project for a luxury oriental day-spa, contained within a wood volume suspended and projecting over the street. A small traditional pre-existing two-floor villa without special quality has been completely transformed in a contemporary key throught simple but strong transformations.

Image Courtesy © CARLO BERARDUCCI ARCHITECTURE

  • Architects: CARLO BERARDUCCI ARCHITECTURE
  • Project: KAMI SPA AT PARIOLI
  • Location: Rome, Italy
  • PROJECT DATE: 2006, 2011
  • COMPLETION DATE: 2013
  • PROGRAM: ORIENTAL LUXURY DAY SPA
  • BUILDING AREA: MQ 900
  • CLIENT: KAMI SPA Srl  Rome, Bangkok
  • DESIGN TEAM: Tommaso Marchioni, Davide Marchetti, Rossella Lanari, Gino Altobelli
  • GENERAL CONTRACTOR: G.I.A. Srl  ROME
  • Software used: Autocad and 3dstudio max

The fountain in Lithuania, Mažeikiai by JPI architektai

Thursday, August 1st, 2013

Article source: JPI architektai

The idea of the project – the water rised concrete slab.

Image Courtesy © S.Strazdauskas

  • Architects: JPI architektai (L.Putniene, V.Putna)
  • Project: The fountain
  • Location: Lithuania, Mažeikiai
  • Software used: Autocad

Co-authors

  • Sculptor: T.Vosylius
  • Constructor – V.P. Čyras
  • Photographer – S.Strazdauskas

(more…)

Graphisoft ARCHICAD  Download a 30-Day FREE trial
Canon
Bentley:Microstation License
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy