Open side-bar Menu
 ArchShowcase

Archive for the ‘MAXON’ Category

M house in Tychy, Poland by RS+ Robert Skitek

Sunday, January 8th, 2012

Article source: RS+ Robert Skitek

The house is located in the district of detached houses, among the chaotic and varied building which is a typical for the majority of contemporary Polish suburbs. The client’s request was a bungalow – the utility program has a living area a private night area and separated space which serves as a cabinet and a spare room. In the future it can be a room for senior.

 

Night View (Images Courtesy Tomasz Zakrzewski)

  • Architect: RS+ Robert Skitek
  • Name of Project: M house
  • Location: Tychy, Poland
  • Structure: PROBEX Marian Urbanik
  • Project Team: Robert Skitek, Robert Wilczok, Barbara Kotas, Dawid Marszolik
  • Completion: 2011
  • Project area: 371 sqm
  • Model: Piotr Witański
  • Photographs: Tomasz Zakrzewski
  • Software used: Allplan (Nemetschek) and Cinema 4d (Maxon)

(more…)

Villa Veth in Hattem, The Netherlands by 123DV (designed using AutoCAD and Cinema 4D)

Sunday, December 11th, 2011

Article source: 123DV

Floating from time to time

Villa Veth is a modern, customized villa, a private residence for a family of four. It is situated on a large parcel of land by a forest near the idyllic town of Hattem in the eastern part of the Netherlands.

The driveway on the entrance side leads to a carport situated below the house. This places the cars out of sight and gives the impression of the house partially hovering. It is a simple architectural approach with a great visual effect. The house looks sleek and abstract on the outside, but has a warm and cozy interior.

Front View (Images Courtesy Christiaan de Bruijne)

  • Architect: Liong Lie – 123DV
  • Name of Project: Villa Veth
  • Location: Hattem, The Netherlands
  • Design Team: Berry van Empel, Andrea Sollazzo, Robin Rook
  • Contractor: Building company Felix
  • Photography: Christiaan de Bruijne
  • Software used: AutoCAD and Cinema 4D

(more…)

Factory Business Center in Braga, Portugal by Simpli Design

Tuesday, December 6th, 2011

Article source: Simpli Design

Factory Business Center (http://www.factoryworkstyle.com) is a business center located on the out-skirts of Braga (north of Portugal), with a bright ‘POP-ART’ decorative style within an industrial pavilion which rents ‘turn-key’ office spaces.

Reception & Entrance

  • Architects: Simpli Design (Designer Jeremy Hugh Aston & Architect João Carlos Ferreira)
  • Project: Fy – Factory Business Center
  • Location: Braga, Portugal
  • Engineering & Building: BEC – Braga Construction Equipment, Inc.
  • Project Area: 700 sqm
  • Type of Building: Office / Business center
  • Project date: 2010
  • Photography: Rui Pires
  • Office Furniture: Iduna, S.A.
  • Software used: The concept, design and interiors are designed with Google SketchUp Pro; The technical development and Plans with Vectorworks; The 3D visuals and renders with Cinema 4D.

(more…)

IWC Museum in Schaffhausen, Switzerland by Smolenicky & Partner Architektur

Sunday, November 13th, 2011

Article source: Smolenicky & Partner Architektur

Two phenomena were important in the project for the IWC museum:

  1. The clock. This museum is a place to showcase the IWC-clock as a small and precious object.
  2. The aesthetic context. In which world in terms of Interior Design do the customers want who purchase an IWC watch want to live?

 

View historical building

  • Architects: Smolenicky & Partner Architektur
  • Project: IWC Museum
  • Location: Baumgartenstrasse 15, CH-8201, Schaffhausen, Switzerland
  • client: IWC Schaffhausen, Branch of Richemont International SA
  • Architect Team: Joseph Smolenicky, project management: Philipp Röthlisberger; collaborators: Christoph
  • Herr, Simon Krähenbühl, Juan-Carlos Smolenicky; site manager: Christof Keller
  • kind of project:
  • Invited study commission 2005
  • Opening: june 2007
  • Floor area: 350 m2
  • Software used: ArchiCAD, Adobe Photoshop, Indesign, Cinema 4D

(more…)

Interwoven landscape in Veneto, Italy by Mirco Bianchini

Friday, November 11th, 2011

Article source: Mirco Bianchini

The project of an environmental enhancer for the Nogara mare highway in Veneto (Italy) provides the unique chance to bring together ecological thinking, host interaction and active materials. Its location (an open country planar area among cultivated fields) enucleates as critical variables the impact of pollutants and the phenomenon of dazzling.

Chemistry

  • Architect: Mirco Bianchini
  • Name of Project: Interwoven landscape
  • Location: Veneto, Italy
  • Thesis supervisors: Alessio Erioli, and co-supervisors Mirko Daneluzzo, Enrico Fontanari and Alberto Bertagna
  • Software used: Rhinoceros, Grasshopper, Script c#, Cinema4d, illustrator and photoshop

(more…)

A Wood Screen for Dinant Road in Belgium by Corbacreative Designed using Vectorworks and Cinema 4D

Friday, September 30th, 2011

Article source: Corbacreative

Customer’s program was clear and well defined. The building should include an exhibition hall at the ground floor and a loft on the first level; as well as become the image of Maison Passion. The location near by a highly frequented artery inspired the project’s dynamic. The sequence of the vertical wooden boarding became a noise shield frontage designed along the road. The extension,s screen frontage made of thin and spaced out wood, give homogeneity to the existing volumes, heterogeneous and obsoletes, creating a succession of plans more or less translucent. It let see though the background shapes and lift up like a curtain to create the principal entrance of the exposition hall.

A Wood Screen for Dinant Road

  • Architects: Corba Philippo
  • Project: A Wood Screen for Dinant Road
  • Location: Belgium
  • Software used: VectorWorks for CAD and Cinema 4D for 3d and rendering

(more…)

Dr.S House in Sendai, Japan by SOY source Architects Designed using Vectorworks, FormZ and Cinema4D

Friday, September 16th, 2011

Article source: SOY source Architects

The composition of volumes and steps is the main theme of this house. We place interior and exterior volumes three-dimensionally.   Series of the volumes overlap each other and create several interior spaces separated loosely without having walls and doors between them.   Utility zone is swelled from floor, a kids’ room is protruded from a wall, and a loft is dangled from a ceiling.   Rests of the spaces are distributed to necessary functions following their special demands.

Image Courtesy SOY source Architects

  • Architects: SOY source Architects
  • Project: Dr.S House
  • Location: Sendai, Miyagi, Japan
  • Structural Engineer: SOY source Architects
  • Construction: Koyugiken Construction
  • Photographer: SOY source Architects
  • Site area: 176 sqm
  • Software used: Vectorworks, FormZ, Cinema4D

(more…)

The Traders’ Commune in Brighton, UK by Alexander Cotterill designed using Cinema 4D and Photoshop

Thursday, September 15th, 2011

Article source: Alexander Cotterill

The Traders’ Commune envisages a society of total self-sufficiency that aims to embrace and regenerate the surrounding area. In reaction to the current economic climate and deterioration of outer cities, the project acts as a critique of the development and decline of a failed planning model in Brighton’s suburbia.

 

The Traders' Commune

  • Architect: Alexander Cotterill
  • Name of Project: The Traders’ Commune
  • Location: Moulsecoomb, Brighton, UK
  • Software used: Cinema 4D and Photoshop

(more…)

Atrium Housing Block bremen Neue Vahr in Germany by Atelier Kempe Thill designed using Vectorworks and Cinema4D

Thursday, September 8th, 2011

Article source: Atelier Kempe Thill

Atelier Kempe Thill has recently won the housing competition „living exceptionally“ at the site Undeloher Straße in Bremen – Neue Vahr. The competition was organized by GEWOBA Bremen – a firm specialized in social housing. The task of the competition was to offer within the usual limited budgets of social housing new innovative strategies that would allow the realisation of more attractive and affordable homes.

Outside-View

  • Architects: Atelier Kempe Thill
  • Project: Atrium Housing Block bremen Neue Vahr
  • Location: Bremen, Germany
  • Client: Gewoba Aktiengesellschaft Wohnen und Bauen, Bremen
  • Site: Bremen – Neue Vahr
  • Task: Apartments for families and singles incl. a parking garage
  • Software used: Vectorworks and Cinema4D

(more…)

Decameron store in São Paulo, Brazil by studio mk27

Wednesday, August 24th, 2011

Article source: studio mk27

The showroom of the Decameron furniture store is located on a rented site in the furniture commercial alley in São Paulo. To make the quick and economic construction viable, the project worked with the premise of a light occupation of the lot, basically done with industrial elements, which could easily be assembled.

Front View (Images Courtesy Pedro vannucchi)

  • Architect: studio mk27 – marcio kogan
  • Project: Decameron store
  • Location: São Paulo, Brazil
  • Project: janeiro ,2010
  • Conclusion: janeiro ,2011
  • Photographer: Pedro vannucchi
  • Software used: AutoCAD, Vectorworks and 4D-Cinema

Side View (Images Courtesy Pedro vannucchi)

  • Site area: 540 m2
  • Built area: 250 m2
  • Co-architect: mariana simas
  • Interior design: diana radomysler, mariana simas
  • Collaborator: pedro tuma . Oswaldo pessano
  • Team: Beatriz meyer, Carolina Castroviejo, Eduardo chalabi, Eduardo glycerio, Eduardo gurian, Elisa friedmann, Gabriel kogan, Lair reis, Luciana antunes, Maria cristina motta, Renata furlanetto, Samanta cafardo, Suzana glogowki
  • Landscape: Renata tilli
  • Contractor: Terra gaia
  • Structure engineer: Pouguett engenharia e projetos
  • Visual identity: nó design

Perspective (Images Courtesy Pedro vannucchi)

The space was constructed through a mixed solution, with maritime transport containers and a specifically designed structure. Despite the spatial limitation imposed by the pre-determined dimension of the containers, the piece has impressive structural attributes that makes piling them possible. Two stories of containers form tunnels where products are displayed side by side.

Perspective (Images Courtesy Pedro vannucchi)

The ample span, necessary to show furniture in relation with each other, is constructed by a metallic structure. This space is closed, in front and in back, by double-height metal casements with alveolar polycarbonate. At the back of the lot, there is a patio filled with trees and a pebbled-ground. When both doors are simultaneously opened, the whole store becomes integrated with its urban context. At rush stressful hours, by opening only the back doors, the store becomes self-absorbed, ruled by the presence of the inner-garden.

Exterior View (Images Courtesy Pedro vannucchi)

On the back of the site is the office, closed by a glass wall that enables the designers to take part on the sales life. Two edges of the design process in contact through the inner patio as other opposing strengths also meet at this small project: The intensity of the urban life and a small nature retreat, the power of the containers and the lightness of the metallic structure and finally, the linearity of the tunnels and the cubic volume.

Images Courtesy Pedro vannucchi

Interior View (Images Courtesy Pedro vannucchi)

Images Courtesy Pedro vannucchi

Containers front View (Images Courtesy Pedro vannucchi)

Exterior View (Images Courtesy Pedro vannucchi)

Interior View (Images Courtesy Pedro vannucchi)

Exterior View (Images Courtesy Pedro vannucchi)

Interior View (Images Courtesy Pedro vannucchi)

Images Courtesy Pedro vannucchi

Interior View (Images Courtesy Pedro vannucchi)

Interior View (Images Courtesy Pedro vannucchi)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy