Open side-bar Menu
 ArchShowcase

Archive for the ‘Revit’ Category

Casa_SSM in Monferrato, Italy by Diego Bortolato Architetto

Saturday, December 21st, 2013

Article source: Diego Bortolato Architetto

This was a project for a New Villa developed on the northwest of Italy, Monferrato Coutryside Area, Piedmont, that follow principle of bioarchitecture.

The development of the new private residence , is based on the juxtaposition of two main bodies , the master house and an annex of service, united by a single large roof , oriented and designed to maximize solar gain during the winter and to protect and reduce the penetration of the same during the summer. A third building , detached from its predecessors is thegarage.

Image Courtesy © Daniela Bortolato

  • Architects: Diego Bortolato Architetto
  • Project: Casa_SSM
  • Location: Monferrato, Italy
  • Photography: Daniela Bortolato
  • General Contractor: LIgnoalp DAMIANIHOLZ&CO S.p.A. Brixen
  • Concrete and Logistic con construction site: Agest Costruzioni
  • Concrete: Ing. Claudio and Sofia Valenzano
  • Concrete Pavings: Capodicasa Sas.
  • Parquet Floorings: Bonardi Matteo per CP Parquet
  • Lights: Sacchi Giuseppe S.p.A. Resp. sig. Mauro Stanchi
  • Project: Luglio 2010
  • Construction: Settembre 2011 Luglio 2012
  • House Surf.: 350 Mq. Land
  • Area: 5.000 Mq
  • Software used: Sketchup, Vectorworks and Revit

A Palace For Nature in Doha, Qatar by sanzpont [arquitectura]

Thursday, December 19th, 2013

Article source: sanzpont [arquitectura]

”An Oasis is a miracle of life in the desert.” sanzpont [arquitectura] has being awarded 3rd place in an international restricted competition for a VIP Palace in Qatar for its innovative and ecologic response to the project brief of this private residence: “The purpose of the competition was to stimulate innovative and creative ideas to create high end luxurious Palace to achieve relaxation and luxury for its VIP users.”

Image Courtesy © sanzpont [arquitectura]

  • Architects: sanzpont [arquitectura]
  • Project: A Palace For Nature
  • Location: Doha, Qatar
  • Status: Idea
  • Architectural & Design Project: sanzpont [arquitectura], Arq. Sergio Sanz Pont, Arq. Victor Sanz Pont, Arq. Tania Cota, Jose Miguel Cano
  • Software used: 3dsmax, VRay Render, Space Planning,  Revit.

HIGHRISE OFFICE BUILDING by Rossetti Architects

Thursday, December 19th, 2013

Article source: Rossetti Architects

Clear, effervescent + in-line with a risk-taking, entrepreneurial spirit was the client vision that inspired this eye-popping, yet sophisticated environment for the Rock Companies Executive Suite. ROSSETTI translated the “live, work, play” lifestyle into offices that are executive, yet don’t take themselves too seriously. This office interior ignited a downtown city’s resurgence, bringing life and energy into the once tired and gray city. The vibrant offices mimic the owner’s vision for the city; high-energy and elegant.  Dominate design inspirations include spaces that are clear, effervescent, and executed in eye-popping color and playful design elements.

Exterior of Detroit’s Compuware Building located in Downtown Detroit, Michigan. ROSSETTI was part of the original architecture team that designed the building in 2000 (completed 2003), Image Courtesy © Rossetti Architects

  • Architects: Rossetti Architects
  • Project: HIGHRISE OFFICE BUILDING
  • Software used: Illustrator, AutoCad and Revit

Campus WU – Master Plan and Landscaping in Vienna, Austria by BUSarchitektur

Friday, December 6th, 2013

Article source: BUSarchitektur

OPEN SPACE AT THE CAMPUS WU

The Campus is a sequence of intertwining open spaces. Buildings on the different zones qualify these spaces from an architectural point of view. The Master Plan model determined the design of these open areas; a fabric of interior and exterior spaces, defined by the location of the buildings’ entrances in relation to the plazas, brings life to the intended environment.

Image Courtesy © BOAnet.at

  • Architects: BUSarchitektur
  • Project: Campus WU – Master Plan and Landscaping
  • Location: Vienna, Austria
  • Photography: BOAnet.at
  • CLIENT: Projektentwicklungsgesellschaft Wirtschaftsuniversität Wien Neu GmbH
  • PROJECT BY: BUSarchitektur & BOA office for the advanced randomness in cooperation with Landschaftsarchitektur
  • SERVICES: Comprehensive Master Plan in collaboration with international experts, Executive Project of the Landscape Architecture
  • INITIATION (beginning) OF THE PROJECT: 2008
  • PROJECT COMPLETION: 2013
  • TYPE OF WORK: New construction
  • PARK AREA: 67.000m²
  • AWARDS: 1st Prize in the International Competition for the Master Plan and Executive Project for Campus WU
  • Book about the Campus WU: www.holiwu.at
  • Software Used: Revit Architecture, Modulcad, 3ds Max, Rhino

LAKEHOUSE RECORDING STUDIOS in ASBURY PARK, NJ

Friday, November 29th, 2013

Article source: Walters-Storyk Design Group

In a world where dreams come easy, but are tough to fulfill, producer/songwriter Jon Leidersdorff has caught a golden ring.  Committed to building a cohesive infrastructure for the music scene in his hometown, Leidersdorff discovered an abandoned warehouse in downtown Asbury Park, and envisioned it as a multi-purpose center for a collective of music business locals. Investing his own savings and securing a Small Business Association (SBA) loan from the local Asbury Park Community Bank, Leidersdorff called the Walters-Storyk Design Group to create his Lakehouse Recording Studios as the lynchpin for the complex.

Lakehouse Studios South Control, Image Courtesy © Holtz Photography

  • Project: LAKEHOUSE RECORDING STUDIOS
  • Location: ASBURY PARK, NJ, U.S.A
  • Photography: Holtz Photography
  • Software used: Revit, AutoCAD, Insul, B&K 2250 sound level meter

Commercial Area in San Jose del Cabo Airport, Mexico by sanzpont [arquitectura]

Thursday, November 21st, 2013

Article source: sanzpont [arquitectura]

AeroShops: Commercial Area inside the Airport.

The recognized Grupo Aeroportuario del Pacifico with a total of 12 airports in Mexico selected the architecture and design firm sanzpont [arquitectura] to carry out the project for the Commercial Area of its new International Terminal at San Jose del Cabo with a total of 7,500 m2.

Image Courtesy © Arq. Victor Sanz Pont

  • Architects: sanzpont [arquitectura]
  • Project: Commercial Area
  • Location: San Jose del Cabo Airport, Mexico
  • Photography: Arq. Victor Sanz Pont
  • Status: Built.
  • Year: 2013.
  • Architectural & Design Project: sanzpont [arquitectura], Arq. Victor Sanz Pont, Arq. Sergio Sanz Pont, Arq. Tania Cota, Jose Miguel Cano, Arq. Erika Martinez, Arq. Claudia Kauil Xix, Eder Jafet Hernández, Elizabeth Valencia, Melissa Chávez, DI. Oscar Sanz Pont, Gerard Delgado
  • Graphic Design & Branding: LDG. Miguel Angel Mendez + sanzpont [arquitectura]
  • MEP Engineering: Edificaciones Arbibe, Ing. Bierge
  • Software used: Revit, 3dsmax.

Construction Team:

  • Commercial Premises Construction & VIP Lounge: Gran Visión, Bernardo Cristerna, Arq. Osvaldo Castrejon
  • AeroMarket Construction: JAY Construcciones, Jesús Alatorre Yeomans
  • Glass and Aluminium Panels in Commercial Premises & VIP Lounge: Vidriera Calvalum, Martin Armenta
  • Glass and Aluminium Panels in Kioskos: Crisal ARTEKPANEL, Javier A. Garcia Martinez
  • Carpentry: Diseño de Maderas y Mas, Ing. Edgar Angulo
  • Sheet Rock: YETCA, Ing. Mario Martinez

136-Engineer Syndicate Office Building in Latakia, Syria by Ark-Kassam Architects

Sunday, November 10th, 2013

Article source: Ark-Kassam Architects

ARK architects proposal project design “Engineers’ Syndicate” for the new architect’s organisation building in Lattakia/Syria.

The design concept is based on different intersections between lines which have been stimulated from the movement of a human carrying a rock as an indication of the labour and toil being a builder, an architect.

Image Courtesy © Ark-Kassam Architects

  • Architects: Ark-Kassam Architects
  • Project: 136-Engineer Syndicate Office Building
  • Location: Latakia, Syria
  • Architect: Abdalrahim Kassam
  • Client: Engineer Syndicate
  • Size: 10000 m2
  • Year: 2013-2016
  • Software used: Revit, Max.

QueensCare Health Centers in East Los Angeles by RBB Architects Inc

Wednesday, October 30th, 2013

Article source: RBB Architects Inc

Consolidated Contracting Services, Inc., a leading Southern California commercial builder, has construction under way for a new 24,000-square-foot QueensCare Health Centers (QHC) facility in East Los Angeles, located at 4816 E. 3rd Street, Los Angeles, Calif. 90022.

Image Courtesy © RBB Architects Inc

  • Architects: RBB Architects Inc
  • Project: QueensCare Health Centers
  • Location: East Los Angeles, U.SA
  • Civil engineer: KPFF Consulting Engineers
  • Electrical engineer: N A Cohen Group, Encino
  • Environmental engineer: Applied Earth Sciences, Los Angeles, is the
  • Landscape Architects: Carter Romanek
  • Software used: Autodesk Revit

(more…)

Queen Elizabeth II Courts of Law in Brisbane, Australia by Architectus

Wednesday, October 30th, 2013

Article source: Architectus

The Queen Elizabeth II Courts of Law have opened to much acclaim. The building is a radical departure from traditional court design. It exhibits a high degree of transparency and lightness appropriate to the expression of contemporary justice and to its sub-tropical locale.

Image Courtesy © Architectus

  • Architects: Architectus
  • Project: Queen Elizabeth II Courts of Law
  • Location: Brisbane, Australia
  • Client: Department of Public Works, Queensland Government
  • Approx. Value: $570m
  • Floor Area: 64 000m2
  • Completion: 2012
  • Software used: REVIT, Autocad, Adobe Photoshop and Indesign

Awards

  • 2013 AIA State Award
  • Public Buildings Category

The Kalamazoo Nature Center Camp in Michigan

Wednesday, October 23rd, 2013

KALAMAZOO, Mich. – One of the country’s older nature-based day camps has undergone a significant facilities makeover to enhance its mission to provide safe experiences that allow children to grow into active and respectful community members through exploration of the natural world.

Image Courtesy © Curt Clayton

  • Project: The Kalamazoo Nature Center Camp
  • Location: Michigan
  • Photography: Curt Clayton
  • Software Used: Revit

The project team

  • Co-master planner, design architect: Lord, Aeck & Sargent, Inc. (Ann Arbor, Mich. office)
  • Co-master planner, landscape architect: The Johnson Hill Land Ethics Studio (Ann Arbor)
  • Architect of record, consulting engineer (structural, civil and MEP/FP): Byce & Associates (Kalamazoo, Mich.)
  • Construction manager: Miller-Davis Company (Kalamazoo, Mich.)
Graphisoft ARCHICAD  Download a 30-Day FREE trial
Bentley:YII2017 Register Now
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy