Open side-bar Menu

Archive for the ‘Rhino’ Category

Danks and Bourke in Sydney, Australia by Tony Owen Partners

Saturday, February 9th, 2013

Article source: Tony Owen Partners 

The new Danks & Bourke commercial building is a refurbishment of a 1960’s concrete furniture warehouse. It is located in the former industrial area of Danks Street, which has lately become a trendy hub for the designer commercial set. The triple-frontage building contains 5,000sqm of office space over two levels, a supermarket and specialty retail stores on the ground floor.

Image Courtesy Tony Owen Partners 

  • Architects: Tony Owen Partners 
  • Project: Danks and Bourke
  • Location: Danks Street, Sydney, Australia
  • Software used: Autocad, Revit, 3-D Studio Max, Maya and Rhino

Darla Moore School of Business, University in Columbia, South Carolina by Rafael Vinoly Architects

Wednesday, February 6th, 2013

Article source: Rafael Vinoly Architects

Rafael Vinoly Architects is proud to announce that the University South Carolina celebrated the “Topping Out” of the new building for the Darla Moore School of Business in a ceremony today held at the construction site. The Darla Moore School of Business, globally renowned for its international business program, has until now been housed in a 1970s-era building located near the university’s historic Horseshoe, site of the original campus established in 1801. The new building—designed by Rafael Viñoly Architects and commissioned by alumna and namesake Darla Moore through a $70 million donation—will provide an environment well suited to answer the challenges of a 21st century business school.

Image Courtesy Rafael Vinoly Architects  

  • Architects: Rafael Vinoly Architects
  • Project: Darla Moore School of Business, University 
  • Location: Columbia, South Carolina
  • Software used: Rhino and Autocad

Podčetrtek Traffic Circle in Podčetrtek, Slovenia by ENOTA Architects

Wednesday, February 6th, 2013

Article source: ENOTA Architects

The Podčetrtek Traffic Circle is built on a regional road located between the municipal sports hall with open-air sports grounds on one side and a spa centre with numerous swimming pools and hotels on the other side. It is primarily intended to slow down the traffic in this consequently very busy area as the main accesses to both complexes also connect to the traffic circle. The design of the roundabout’s central island thus references the appearance of both facilities and marks the entrance points to the destinations of the visitors to either of the programme centers.

Image Courtesy Miran Kambič 

  • Architects: ENOTA Architects
  • Project: Podčetrtek Traffic Circle
  • Location: Podčetrtek, Slovenia
  • Photography: Miran Kambič 
  • Type: Commission 
  • Year: 2012 
  • Status: Completed 2012 
  • Size: 380 m2 
  • Budget: 33.000 EUR 
  • Client Terme Olimia 
  • Project team: Dean Lah, Milan Tomac, Alja Černe, Tjaž Bauer
  • Software used: AutoCAD and Rhino-grasshopper

Grundfos Dormitory in Aarhus, DK by CEBRA

Tuesday, February 5th, 2013

Article source: CEBRA

One of Grundfos Dormitory’s remarkable characteristics is providing student housings in the heart of Aarhus’ new harbour front development – that is, a low cost residential building on a very attractive site. Like many other industrial harbor fronts, the former container port of Aarhus is being transformed into a dynamic new neighborhood. Grundfos Dormitory is one of the first finished projects in the area that on completion will be home to 7,000 inhabitants and provide 12,000 workplaces. Its total site area amounts to 800,000 m2 making this development one of Europe’s largest harbor front city developments.

Image Courtesy Mikkel Frost

  • Architects: CEBRA
  • Project: Grundfos Dormitory
  • Location: Grethe Løchtes Gade, Aarhus, DK
  • Commission: Private
  • Type: Turnkey contract
  • Category: Residential
  • Client: Engineering College of Aarhus
  • Software used: AutoCAD, Revit, Rhinoceros, VRay for Rhinoceros, Adobe Photoshop and Illustrator

Pedras Salgadas Eco-Resort in Portugal by RA Architectural & Design Studio

Tuesday, January 29th, 2013

Article source: RA Architectural & Design Studio

The new Eco-resort of Parque de Pedras Salgadas, Portugal, consists of a set of seven small houses in perfect harmony with the surrounding outstanding nature.

Designed in a modular prefabrication system but flexible to adapt to the specific places within the park, these houses result in several different combinations of the same three modules (entrance/bathing – living – sleeping) creating different morphologies and different dialogues with the surrounding nature, wisely occupying the empty spaces between the trunksof large trees and, at the same time, allowing each home to be unique, special and worth visiting.

Image Courtesy FG + SG

  • Architects: RA Architectural & Design Studio
  • Project: Pedras Salgadas Eco-Resort
  • Location: Pedras Salgadas, Portugal
  • Architects: Luís Rebelo de Andrade & Diogo Aguiar
  • Collaborators:  Madalena Rebelo de Andrade, Raquel Jorge, João Jesus
  • Project Area: 1 EcoHouse — 52,92 m2 \ 12 EcoHouse2 — 635,04 m2
  • Client: UNICER
  • Constructor: Modular System
  • Photographs: FG + SG
  • Software used: ArchiCAD & Rhino


Qube in Amsterdam, Netherlands by NL Architects

Sunday, January 27th, 2013

Article source: NL Architects

Qube is a commission for an office building in Amsterdam. Qube is part of a development called IJpunt by G&S Vastgoed. IJpunt will consist of four blocks designed by Claus en Kaan, Dedato, MVSA and NL A.

The site is truly unique: the most western corner of the Minervahaven, overlooking the Mercuriushaven and the river IJ. Well connected to both the city center as the rest of the world, both by car, public transport and bike.

Image Courtesy NL Architects

  • Architects: NL Architects
  • Project: Qube
  • Location: IJpunt, Minervahaven, Amsterdam, Netherlands
  • Nl Architects: Pieter Bannenberg, Walter Van Dijk, Kamiel Klaasse
  • Team: Arne Van Wees With: Giulia Pastore, Gen Yamamoto, Gert Jan Machiels
  • Qube: Office Building, Ijpunt,Minervahaven, Amsterdam 2012 – 201?
  • Client: G&S Vastgoed
  • Size: Gross Floor Area 6560m², Net Floor Area 5940m², Plot 2430m²
  • Structural Engineers: Van Der Vorm
  • Installations: Wichers & Dreef
  • Software used: Autocad, Rhino 3D, 3dS Max, Adobe Illustrator


Bobigny School Complex in Paris, France by Mikou Design Studio

Friday, January 18th, 2013

Article source: Mikou Design Studio

This new building is a remarkable amenity in the city centre, visible by its façades and its roof, a founding element of the project. We designed it to be both welcoming and protective, turned inwards towards inner courtyards to ensure privacy.

Building’s aerial view : Image Courtesy Florian Kleinfenn

  • Architects: Mikou Design Studio
  • Project: Bobigny School Complex
  • Location: Bobigny, Paris, France
  • Program: Pre-school, Primary School, Sports And Recreation Center, Library
  • Client: City of Bobigny
  • Surface: 5 000 m²
  • Date: Completion septembre 2012
  • Photo Credits: Florian Kleinfenn
  • Software used: Autocad LT 2011, Rhinoceros, Adobe Photoshop, Adobe Illustrator


Interfaith Chapel at the University of North Florida, U.S.A. by Brooks + Scarpa with KZF Design Studio

Wednesday, January 16th, 2013

Article source: Brooks + Scarpa with KZF Design Studio

Brooks + Scarpa and KZF Design Studio have released their proposal for the new Interfaith Chapel at the University of North Florida in Jacksonville, FL The proposed 7000 square foot Interfaith Chapel is designed to be a special place where students and others can slow down their lives, re-focus on their spiritual needs and reflect. At the same time, the Chapel will support a variety of diverse religious services, student ceremonies, weddings, other intimate events, lectures, meditative practices and musical performances.

Image Courtesy Brooks + Scarpa with KZF Design Studio

  • Architects: Brooks + Scarpa with KZF Design Studio
  • Project: Interfaith Chapel at the University of North Florida
  • Location: Florida, U.S.A.
  • Software used: Rhino, Photoshop and AutoCAD


Camp at Cabot Beach in Prince Edward Island, Canada by Studio North

Saturday, January 12th, 2013

Article source: Studio North

Camp at Cabot Beach is designed to address the needs of children between the ages of 8-17 who are living in families that have been affected by chronic illness or disability. The camp was established 5 years ago and runs for 3 weeks every August. In 2009 they needed new facilities.

Frontview : Image Courtesy © Matthew Kennedy

  • Architects: Studio North
  • Project: Camp at Cabot Beach
  • Location: Malpeque, Prince Edward Island
  • Photography: Matthew Kennedy
  • Collaborators: Clayton Blackman, Andrew Choptiany, Sam Lock
  • Area: 3,900sq.ft.
  • Completed: 2009
  • Software used: Designed the camp by hand, drawings and modeling using rhino; also used illustrator for diagrams and lineweights.

St. Horto in Rome, Italy by OFL Architecture

Thursday, January 3rd, 2013

Article source: OFL Architecture

The project stems from the idea of creating a perfect synergy between architecture, nature and social technologies Jardimpu (Arduino and Paraimpu).

The name “St. Horto” is a pun, between Italian and English language. The two words “Horto” and “St” give at the same time the idea of a sacred, intimate garden and of something crooked, apparently disordered but full of life, just like a plant. Together they represent the irregular geometry (crooked or oblique) but highly controlled architectural design of the garden.

Image Courtesy OFL Architecture

  • Architects: OFL Architecture
  • Project: St. Horto
  • Location: Rome, Italy
  • Architecture and Landscape Design: OFL Architecture (Francesco Lipari, Vanessa Todaro, Federico Giacomarra)
  • Team: Mitchell Joachim (Consultant for Sustainability), Alberto Serra (Technology Strategies), Nicola Corona (Cultivation Cycle), DOF Engineers – Felice Allievi (Engineering)
  • Client: Lanificio 159
  • Area: 200 sqm
  • Year: 2012
  • Software used: Rhino, 3dS Max and V-ray


GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy