Open side-bar Menu
 ArchShowcase

Archive for the ‘Rhino’ Category

New Taipei City Museum of Art in Taiwan by DCPP Arquitectos

Saturday, September 24th, 2011

Article source: DCPP Arquitectos

Our proposal for the New Taipei City Museum of Art is an open and welcoming design that erases the barrier of exclusivity normally surrounding the world of art, patrons, and experts.  As such, the architecture of the New Taipei City Museum of Art is one that embodies this idea of erasure through eliminating the traditional borders between exhibition space and circulation, as well as exterior and interior. Every part of the museum is represented by a space without limits that can hold any type of expression.

Render View

  • Architects: DCPP Arquitectos
  • Project: New Taipei City Museum of Art
  • Location: Taipei, Taiwan
  • Date: 2011
  • Built Surface: 59,740 m2
  • Software used: 3D max, Rhino, V-Ray, Photoshop and AutoCad

(more…)

A New Norris House by University of Tennessee

Sunday, September 18th, 2011

Article source: University of Tennessee

In 1933 the Tennessee Valley Authority constructed a model community, Norris, Tennessee, as part of the Norris Dam construction project. A key feature of this New Deal village was the Norris House, a series of homes built as models for modern and efficient living. In light of the 75th anniversary of the Norris Project, an evolving interdisciplinary team of UT students and faculty are reinterpreting the Norris paradigm and creating a New Norris House – a sustainable home designed for the 21st century. In 2009 the New Norris House was one of six winners nationally of the Environmental Protection Agency’s People Prosperity and the Planet (P3) Competition. It offers a replicable model for contemporary sustainable living that holds the promise of significant benefit across East Tennessee.

Image Courtesy University of Tennessee College of Architecture and Design

  • Architects: University of Tennessee
  • Project: A New Norris House
  • Location: Norris, Tennessee
  • Builders: University of Tennessee, College of Architecture and Design; Clayton Homes; Johnson and Galyon
  • Project Year: 2011
  • Project Area: 768 sq.ft.
  • Landscape Architect: University of Tennessee, College of Architecture and Design
  • Structural Engineer: University of Tennessee, College of Engineering, in collaboration with Mallia Engineering Company
  • Mechanical/Electrical/Plumbing Engineer: University of Tennessee, College of Architecture and Design
  • Photography: University of Tennessee College of Architecture and Design, Ken McCown
  • Software used: AutoCAD, Ecotect, FormZ, Rhino, Adobe Creative Suite

(more…)

Busan Opera House Proposal in South Korea by solus4

Saturday, September 17th, 2011

Article source: solus4

ELEGANT MOTION IN A BUILDING FORM – THE BUSAN METROPOLITAN CITY OPERA HOUSE PROPOSED DESIGN BY solus4

Solus4 of Kittery Maine and Jamestown Rhode Island proposed a design solution for the Busan Opera House that flows with the elements of culture and history of Korea.

Alfonso Lopez, lead designer for Solus4 describes the origins of their design: “A very special characteristic of Korean heritage is the linked uniformity of the art, history, culture and language. Much of this is based on the beauty and the pleasure that each element of culture gives to the individual and the community”.

Dusk View

  • Architect: solus4
  • Name of Project: Busan Opera House Proposal
  • Location: Busan, South Korea
  • Software used: Designed using Rhino & ACAD and  used 3dsMax for all cg renderings

(more…)

Lamar Advertising Headquarters in Baton Rouge, Louisiana by Eskew+Dumez+Ripple

Thursday, September 15th, 2011

Article source: Eskew+Dumez+Ripple

This new corporate headquarters for a local advertising agency is a reaction against the standard issue office environment. People require interaction in today’s workplace as they go to work to collaborate, to brainstorm, to do research, to do a range of activities they don’t necessarily think of as “work” in the traditional sense of the word. Much of what we observe in creative environments is a more informal interaction in settings not typical or traditional, such as chance meetings in corridors or conversations around the coffee pot.

Our design is structured to reinforce that culture of openness. To accomplish this, we have radically altered the internal configuration of a 1970’s era data center while leaving the exterior essentially unchanged.

 

Renderings (Courtesy of Eskew+Dumez+Ripple)

  • Architect: Eskew+Dumez+Ripple
  • Name of  project: Lamar Advertising Headquarters
  • Location: Baton Rouge, Louisiana
  • Client: Lamar Advertising
  • Project Size: 115,000 square feet
  • Year of Completion: 2011

(more…)

Twin Houses in California by Predock Frane Architects designed using Rhino and Autocad

Wednesday, September 14th, 2011

Article source: Predock Frane Architects

This project is located in the Pacific Palisades, a hilly region between the Pacific Ocean and the Santa Monica Mountains within an existing 1950\’s housing development. The project consists of twin houses sited adjacent to each other on a steep slope above a seasonal watershed. In this project we were interested in exploring the intersection of two classic California building typologies; the courtyard house and the hillside house.

Front View (Images Courtesy Jason Predock)

  • Architect: Predock Frane Architects
  • Name of Project: Twin Houses
  • Location: Pacific Palisades, California, USA
  • Size: Two Houses, Each approximately 4,500 SF (455 square meters)
  • Year completed: 2008
  • Photos: Jason Predock
  • Software used: Rhino and Autocad

(more…)

The Diamondhouse by XTEN Architecture designed using AutoCAD and Rhino

Wednesday, September 14th, 2011

Article source: XTEN Architecture

The Diamondhouse is a music studio extension to a house located deep in a canyon, set against a severely sloping hillside, with minimal access and little space upon which to build. Direct sunlight reaches the site for only a few hours a day. The geotechnical conditions on site were challenging, requiring 30-foot caissons to underpin new walls and foundations. A complex web of regulations governed the height, width, depth and specific configuration of the retaining walls needed to build the project.

The Diamondhouse

  • Architects: XTEN Architecture
  • Project: Studio Extension to Residence
  • Project Date: 2006 – 2010
  • Project Size: 1,500 Square Feet
  • Program: Studio Extension to Residence
  • Software used: AutoCAD and Rhino

(more…)

Busan opera House in South Korea by TASK Architects designed using 3dsmax, Rhino and Grasshopper

Thursday, September 8th, 2011

Article source: TASK Architects

Busan is one of the most important Korean cities and its largest port. The project is located in the newly developed area of north port. We wanted to create an Icon. A monument that would shift the vision of the locals and international visitors alike and create new experiences for each visitor while on the same time is welcoming and inviting. And can be the city’s vision of future development.

Exterior rendering

  • Architect: TASK Architects
  • Name of Project: Busan opera House
  • Location: Busan, South Korea
  • Team: Taymour Senbel, Khaled ElAshry , Ahmad Badr ElDin, Aya Ibrahim
  • Theory: A New Paradigm of Contemporary Korean Design
  • Software used: 3dsmax, Rhino and Grasshopper

(more…)

Serlachius Museum Gösta Competition Entry in Mänttä, Finland by Eero Lunden Studio (Helsinki, Finland) + Eric Tan of PinkCloud.DK

Thursday, September 8th, 2011

Article source: Eero Lunden Studio (Helsinki, Finland)  + Eric Tan of PinkCloud.DK

Can the experience of art be enhanced through architecture?

White walls + Isolated Rooms = Good museum? Our design of the Serlauchius Museum extension seeks to deviate from that mantra by developing an architecture that directly facilitates human interaction with art. It is our firm belief that the experience of art can be enhanced through innovative architecture and new spatial experiences.The design of the Maison Promino seeks to achieve two main goals: to create an inspiring piece of architecture that will enhance the image of Serlachius Art Musuem globally and to provide a truly unique museum experience by connecting visitors with the art like never before.

Exterior View

  • Architect: Eero Lunden Studio (Helsinki, Finland)  + Eric Tan of PinkCloud.DK
  • Name of Project: Serlachius Museum Gösta Competition Entry
  • Location: Mänttä, Finland
  • Software used: Maya, 3D Studio Max, Rhino

(more…)

Nakahouse in Hollywood Hills, California by XTEN architecture designed using AutoCAD and Rhino

Sunday, September 4th, 2011

Article source: XTEN architecture

Nakahouse is an abstract remodel of a 1960’s hillside home located on a West facing ridge in the Hollywood Hills, just below the Hollywood sign. To the South and West are views of the Beechwood Canyon; to the East is a protected natural ravine, with a view of Griffith Park Observatory in the distance.

Exterior View (Images Courtesy Steve King)

  • Architect: XTEN architecture
  • Name of Project: Nakahouse
  • Location: Hollywood Hills, California
  • Photography: Steve King
  • Software used: AutoCAD, Rhino

(more…)

(RE)Configured-Assemblage in Long Beach, CA by Wendy W Fok Architect designed using Rhino and Grasshopper

Thursday, August 25th, 2011

Article source: Wendy W Fok Architect

(RE)Configured-Assemblage is a developmental landmark proposal composed of reconfigured traces of shipping containers, through diligently reconnecting, revitalising, and humanizing the accessibility of the City of Long Beach, Long Beach Blvd and Broadway Area. Through proposing three types of innovatively reconstructed modular shipping containers, the overall construct leads to open courtyards, interlocking units, and playfully generated programs that introduce a new innovative topological design that regenerates and reconnects the community.

Render Interior 01

  • Architects: Wendy W Fok Architect
  • Project: (RE)Configured-Assemblage
  • Location: Long Beach, CA
  • Software used: Rhino 3D / Panelling Tools / Grasshopper. Renderer Vray.

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy