Open side-bar Menu

Archive for the ‘Artlantis’ Category

Hans Klotz limited company in Bolzano, Italy by Monovolume Architecture + Design (designed using ArchiCAD and Atlantis)

Saturday, January 14th, 2012

Article source: Monovolume Architecture + Design

Hans Klotz Ltd. is a long-established and successful wholesale company for fruit and vegetables with headquarter in Bozen-Sigmundskron. The new offices should be integrated into an existing building on the company area. To confer an independent character, the necessary spaces were added as an autonomous, two storey volume above the existing ground floor as a kind of architectural parasite. The new building takes up the roof lines of the old, then distorting them to open the volume on the north and west side, towards huge apple plantations. Hence the new construction allows an optimal orientation of the office spaces to the north, combined with a great outlook.

Image Courtesy Urlich Egger

  • Architects: Monovolume Architecture + Design
  • Project: Hans Klotz limited company
  • Location: Bolzano, Italy
  • Client: Hans Klotz limited company
  • Architectural staff: Arch. Simon Constantini / Arch. Heidi Morandell
  • Structural engineers: PlanPunkt GmbH
  • Photographer: Urlich Egger
  • Program: commercial building
  • Realisation: 2010/11
  • Volume: 1.200 m³
  • Building area: 280 m²
  • Software used: ArchiCAD for modeling and design and Artlantis for rendering


The Capitol Rainbow – Sacramento in California by meridian 105 architecture

Saturday, November 19th, 2011

Article source: meridian 105 architecture

Meridian 105 Architecture submitted this proposal to the City of Sacramento as a concept for the redesign of Capitol Mall, the entry boulevard and view corridor to the California State Capitol building. The proposal reconsiders vehicular circulation, activates a grassed median running through the center of the street, and integrates a network of bike and pedestrian circulation connecting the mall to the cultural and historical components of the City.


  • Architect: meridian 105 architecture
  • Name of Project: The Capitol Rainbow – Sacramento
  • Location: Sacramento, California
  • Year: 2011
  • Client: The City of Sacramento
  • Software used: Revit, Photoshop, Artlantis


CASA G in Iceland by Gudmundur Jonsson Arkitektkontor Designed using ArchiCad and Artlantis

Sunday, September 18th, 2011

Article source: Gudmundur Jonsson Arkitektkontor

The concept of Casa G is based on reading and feedback to the landscape it exists on.  The characteristic landscape situation and view differences distinctively in each direction. Towards south the view to the sea and islands, towards north the characteristic triangular mountain, towards east the glacier and towards west the river and canyon.

Exterior View


Family House in Braskiu street, Lithuania by UAB Architektu biuras G.Natkevicius ir partneriai

Thursday, August 18th, 2011

Article source: UAB Architektu biuras G.Natkevicius ir partneriai

The building is in Lithuania and is located in the second largest city with the population of 400 000. The customer chose to live on the hill at the center of the city with a view of the confluence of a two largest rivers in Lithuania.

Exterior View (Images Courtesy G.Česonis )

  • ARCHITECT: UAB Architektu biuras G.Natkevicius ir partneriai
  • NAME OF PROJECT: Family House in Braskiu street
  • LOCATION: Braškių(Strawberry) st., Kaunas, Lithuania
  • COMPLETED: 2011
  • BUILDING AREA: 272 m2
  • TEAM OF ARCHITECTS: G.Natkevičius, M.Mickevičius
  • PHOTOGRAPHS: G.Česonis
  • Software used: AutoCAD and Artlantis


Villa Eindhoven II in Netherlands by De Bever Architecten

Tuesday, July 19th, 2011

Article source: De Bever Architecten

On a quiet spot near the river dommel, in downtown Eindhoven, a town villa from 1930 is located, designed by Louis Kooken, founder of the 110 year existing architecture office De Bever Architecten. The interior of one of the dwellings in the villa has now been refurbished by the current architects of the office, Stefan de Bever and Heleen van Heel.

Image Courtesy Merel van Beukering

  • Architects: De Bever Architecten
  • Project:Villa Eindhoven II
  • Location: Eindhoven, Netherlands
  • Client: private
  • Surface: 220m²
  • Team: Stefan de Bever, Heleen van Heel, Jan Smits, Thomas van Weert
  • Software used: Autocad architecture 2010 for the drawings and Artlantis Atudio 3 for the render of the kitchen


V Tower in Denver, Colorado by Meridian 105 Architecture (designed using Artlantis and Revit)

Wednesday, June 8th, 2011

Article source: Meridian 105 Architecture

V Tower is a residential high rise positioned atop of a base of retail, restaurant, cafe, and parking.  The project establishes a new ‘ground’ plane above this volume by providing residents with an urban park occupying the full dimensions of the site and building footprint, creating a sense that the tower is built at grade. Among the amenities provided at this level are generous open areas of grass, a pool, and community garden.

Night View

  • Architects: Meridian 105 Architecture
  • Project: V Tower
  • Location: Denver, Colorado
  • Design Year: 2011
  • Anticipated Completion: 2011
  • Quanity of Units: 240
  • Software used: Modeled in Revit 2011 and rendered in Artlantis


V-HOUSE in Leiden, The Netherlands by GAAGA

Wednesday, June 1st, 2011

Article source: GAAGA

V- HOUSE is designed for a private client and is located in the urban planning area “Nieuw Leyden”, a high dense area in the city of Leiden (The Netherlands).

Front View (Images Courtesy Marcel van der Burg)

  • Architect: GAAGA
  • Name of Project: V-HOUSE
  • Location: Leiden, The Netherlands
  • Team: Esther Stevelink and Arie Bergsma
  • Client: private
  • Realisation: 2008 – 2010
  • Contractor: Verbeij Bouw, Boskoop.
  • Structural Engineering: IMD,  Rotterdam
  • Energy performance & building physics: GAAGA – Arie Bergsma
  • Photographs: Marcel van der Burg
  • Software used: Autocad and Artlantis software for rendering


Tall Emblem Structure in Za’abeel Park, Dubai, UAE by Marco Acerbis Architetto

Sunday, May 15th, 2011

Article source: Marco Acerbis Architetto

XI ThyssenKrupp Elevator Architecture Award

The location of this new tower is a beautiful green area surrounding a lake and very close to the city. The proximity to the airport will give the new building an opportunity to be seen from the sky and not only from the earth. The landscape of the city area is mainly flat and with very strong sunlight. Climate conditions are typical of this latitude and are certainly extreme in some months of the year. A lot of time was spent thinking about what the best gesture for such a scenario would be. So that in one building I could respond to all area conditions and social expectations required by a new iconic tower. A particular thought was given to the experience that children shall obtain from a contemporary building.

Tall Emblem Structure

  • Architect: Marco Acerbis Architetto
  • Name of Project: Tall Emblem Structure
  • Location: Za’abeel Park, Dubai, UAE
  • Software used: Rhino and Artlantis


Villa Belvedere in Cuneo, Italy by Marco Acerbis Studio

Thursday, May 12th, 2011

Located in one of the most beautiful northern Italian landscapes, Villa Belvedere literally conveys the astonishing surroundings in one simple yet animated object.  Its lightness reminds of the wings of a plane and the way it plays with light and shadows enhances what at first sight might appear as an elementary geometry. It is not. The whole house, located on one single floor and covered by one big statement roof is articulated to create an architectural experience of constantly changing views, lights and colours while walking through internal gardens, huge living spaces, a sixty meter long and top lit corridor, independent spacious private rooms and a secret hidden garden with plunge pool.

Villa Belvedere

  • Architects: Marco Acerbis Studio
  • Project: Villa Belvedere
  • Location: Cuneo, Italy
  • Completion: 2008
  • Area: 1000 mq
  • Client: Private
  • Software used: Rhino and Artlantis


Polins in Portogruaro, Italy by Marco Acerbis Studio designed using Rhino and Artlantis

Tuesday, May 10th, 2011

Within the development of Eastgate Park, namely the largest logistic and industrial masterplan in the North East of Italy and covering an area of 1,8 million of square meters, the new Polo per l’Innovazione Strategica has been completed. This new multifunctional building is generated by the cooperation between Portogruaro Council and Portogruaro Campus (Ca’ Foscari University, Venice) and has the objective of developing new business strategies by merging the university world, the business consulting world and the entrepreneurial world.

Exterior View

  • Architect: Marco Acerbis Studio
  • Name of Project: Polins
  • Location: Portogruaro, Venezia, Italy
  • Completion time: 2008-2010
  • Area: 800 mq superficie coperta / covered area
  • Client: Pirelli Re / Fondo Spazio Industriale / Comune di Portogruaro
  • Certifications: Casa Clima Classe A+, Klima Haus Class A+
  • Software used: Rhino and Artlantis


Canon: oce crystalPoint
Kenesto: 30 day trial
Bentley: RealityModeling - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise