Open side-bar Menu

Archive for the ‘3dS Max’ Category

Contemporary Japanese Garden in London, U.K by MyLandscapes LTD

Wednesday, April 9th, 2014

Article source: MyLandscapes LTD

The 250sqm site runs east to west and is surrounded by two buildings, a perimeter wall and open on the western side. Initially the ground was pretty level and laid to paving blocks, allowing access to the buildings but serving not much purpose and fairly static. The project took 3 months to build during the wettest winter in the British Isles at a cost of £140,000.

Image Courtesy © Amir Schlezinger

  • Architects: MyLandscapes LTD
  • Project: Contemporary Japanese Garden
  • Location: London, U.K
  • Photography: Amir Schlezinger
  • Software used: 3-D Max and Photoshop

THE EL PINAL KINDERGARTEN in Medellín, Colombia by Felipe Bernal Henao + Javier Castañeda Acero + Alejandro Restrepo Montoya

Thursday, April 3rd, 2014

Article source: Felipe Bernal Henao + Javier Castañeda Acero + Alejandro Restrepo Montoya

Background and Context

Since 2008, 21 new kindergartens have been built in Medellín in barrios with problems of insecurity and social inequality.  The El Pinal Kindergarten was awarded through a public architectural tender and has been conceived as a space for education, culture and life.  The project is located on the slopes of the central – eastern area of Medellín, in a sector of unplanned settlements and informal housing.

Image Courtesy © Juan Felipe Gómez Tobón

  • Architects: Felipe Bernal Henao + Javier Castañeda Acero + Alejandro Restrepo Montoya
  • Location: Medellín, Colombia
  • Photography: Juan Felipe Gómez Tobón
  • Software used: Autocad 2014, Sketch up and 3D-Max. 
  • STRUCTURAL DESIGN: Jorge Arbeláez
  • HYDROSANITARY DESIGN: Caudales y Presiones S.A.
  • ARCHITECTURAL DESIGN CONSULTANT: Carlos Mario Rodríguez Osorio
  • BIOCLIMATIC AND ERGONOMIC DESIGN: Ader Augusto González, PVG Arquitectos
  • YEAR: 2012
  • SURFACE AREA: 850 m2
  • ARCHITECTURAL – DESIGN AND PROJECT – DEVELOPMENT GROUP: Juan David, Cerón Betancur, Luis Felipe Cardona, Juan Esteban Parra Henao, Pablo Rico Álvarez, Parmenio Bedoya Aguirre, Maritza Mejía, Sebastián Vallejo Palacio, Eugenio Lara Rodríguez, Martina Centeno, Carlos Ossa, Steven Yepes, Camilo Arenas, Maida González, Alejandro Vanegas, Yuri Rosero, David Hernández, Santiago Bedoya Macías, Felipe Valencia Herrera

House P+G in Weinheim, Germany by Architekten Wannenmacher + Möller GmbH

Wednesday, April 2nd, 2014

Article source: Architekten Wannenmacher + Möller GmbH

This detached house with a self-contained flat is being built on a plot of approximately 2,000 square metres in a prime residential area of Weinheim (Bergstrasse) for a family of five. The design is for a building that is split into individual volumes and that has two storeys facing Weinbergstrasse in the northeast and three storeys facing the garden in the southwest due to the extreme slope of the plot. A detached house, built in 1999, which still exists on the plot, is to be retained and included in the design.

Image Courtesy © Jose Campos

  • Architects: Architekten Wannenmacher + Möller GmbH (Andreas Wannenmacher)
  • Project: House P+G
  • Location: Weinheim, Germany
  • Photography: Jose Campos
  • Software used: Archicad and 3D studio max.
  • Construction: 2012
  • Area (sqm): 2170
  • Constructed Area (sqm): 425

FIFTYTHREE, INC. in 60 Hudson Street Suite 1810, NEW YORK by +ADD

Thursday, March 27th, 2014

Article source: +ADD 

FiftyThree is a space to create – a combination between work space, library, home and a forest. Honest materials and understated confidence. Under this creed – that we never lost sight of – we created a space that involved a very honest and open layout that promoted teamwork and collaboration.

Image Courtesy © Matthew Williams

  • Architects: +ADD  (Laura Gonzalez Fierro )
  • Project: FIFTYTHREE, INC.
  • Location: 60 Hudson Street Suite 1810, NEW YORK 10013
  • Photography: Matthew Williams
  • Software used: Autocad 2013, 3D Max, Rhino, Illustrator and Photoshop
  • Collaborator: Carolina Rivera
  • Structural Engineer: Anthony Gennaro P.E.
  • General Contactor: Northern Bay Contractors, Inc
  • Project Year: 2014
  • Area: 6,600 sq ft

FEEL FOOD LLC in New York by +ADD

Wednesday, March 26th, 2014

Article source: +ADD

Gastronomic LAB – A series of chambers infused by a varying gastronomical experiences – display of produce, court to enjoy, and laboratory. The later one composed of a hot and cold sections complemented by the cold pressed juice section. Smells, colors, taste and nature will intervene to create one single space that can be fragmented into self sufficient parts but at the same time work as a whole. A laboratory that studies, preserves and maintains the natural active ingredients, minerals, flavors and aromas in food.

Image Courtesy © Matthew Williams

  • Architects: +ADD
  • Project: FEEL FOOD LLC
  • Location: New York
  • PhotographyMatthew Williams
  • Software used: Autocad 2013, 3D Max, Rhino, Illustrator and Photoshop
  • Collaborator: Carolina Rivera / Germain Chan
  • Structural Engineer: Anthony Gennaro P.E.
  • General Contactor: C & A Seneca Construction LLC
  • Project Year: 2013
  • Area: 2,000 sq ft

Alkhozama Desert House in Riyadh Desert, Saudi Arabia by Ark-Kassam Architects

Saturday, March 15th, 2014

Article source: Ark-Kassam Architects

Ark-Kassam Architects have created a contemporary residence design concept which is to be allocated on a knoll in the middle of a private Oasis palm, Al-Riyadh Desert.

Three Masses are forming the design of the house and defining the entry lobby with the Arcade courtyard and the interior garden. These volumes are the Service Mass, Living Mass with sunset view and Night Mass with sunrise view. All masses were organized in order to provide the needed shade for one another, creating the different atmospheric scales in between the indoor and the outdoor space protecting the house from extreme weather conditions.

Image Courtesy © Ark-Kassam Architects

  • Architects: Ark-Kassam Architects
  • Project: Alkhozama Desert House
  • Location: Riyadh Desert, Saudi Arabia
  • Software used: Revit, 3D Max and Photoshop
  • Project Architect: Abdalrahim Kassam
  • Client: Conser Co.
  • Area: 1500Sq.m
  • Design Year: 2014
  • Construction Year: 2014-2015

OFFICE & HOUSE LUNA in Buenos Aires, Argentina by estudio HMA

Friday, February 21st, 2014

Article source: HM.Arquitectos 

The project is located in the southern part of the city of Buenos Aires, precisely in Parque Patricios, a neighborhood that is being promoted as a technological pole. This characteristic motivated the client to start the construction of a building that unfolds into two separate volumes, his home and an office for his business. Both buildings have in common constructive and material decisions, however they show a strong formal contrast. In addition, the two volumes meet sustainable conditions: ventilated facades, reuse of rainwater and FCS certified wood ( OSB ).

Image Courtesy © Federico Kulekdjian

  • Architects: estudio HMA
  • Project: OFFICE & HOUSE LUNA
  • Location: Buenos Aires, Argentina
  • Photography: Federico Kulekdjian
  • Software used: Autocad 2010 and 3d studio max
  • Construction: Fernando Hitzig & Leonardo G. Militello Luis Acosta
  • Structural Advisor: Carlos Gandini
  • Total Covered Surface: 250 m2
  • Total Uncovered Surface: 100 m2
  • Year: 2012-2013

La Planta in Jalisco, México by Agraz Arquitectos

Wednesday, February 12th, 2014

Article source: Agraz Arquitectos

Where there was once decomposed organic matter, now there is art, sports and leisure. It is the conversion of a sewage treatment plant into a multidisciplinary center.

After being built nearly two decades ago in Tlajomulco de Zuñiga, this place never really worked and saw its contents come into a rapid estate of decomposition. Years later, local authorities called for new meanings for the place, making it a great challenge.

Image Courtesy © Mito Covarrubias

  • Architects: Agraz Arquitectos
  • Project: La Planta
  • Location: Jalisco, México
  • Photography: Mito Covarrubias
  • Software used: Autocad, Sketchup and 3dMax
  • Awards: Honourable Mention at the VII Biennal of Jalisco Architecture 2013
  • Cliente: Tlajomulco de Zuñiga City Government, Enrique Alfaro Ramírez, Alberto Uribe Camacho, Ismael del Toro Castro
  • Project: 2011
  • Completion: 2013
  • Author: Agraz Arquitectos S.C., Ricardo Agraz
  • Collaborators: Erick Martínez, Miguel Sánchez, Juan Antonio Jaime, Brenda Barron, Blanca Moreno, Gabriela Villarreal, Javier Gutiérrez, Gabriel Gómez, Humberto Dueñas, Marc Fernández, Fernanda Palma, Israel Picos, Javier H. Aguirre, Leticia Macias.
  • Construction: Tlajomulco Public Works Office, Hugo Luna Vázquez – Strategic Project Coordinator, David Miguel Zamora Bueno – Minister of Public Works , Public bidding, Gama Constructores y Asociados S.A. de C.V. – Francisco Javier Peregrina Barajas.
  • Art Direction: Francisco Morales Dufour, Adrián Guerrero
  • Site area: 32 990 m2
  • Construction area: 1375 m2

Zodchestvo House by ITHAKA – Architecture and design

Saturday, February 8th, 2014

Article source:  ITHAKA – Architecture and design

“Zodchestvo” House is created within the frames of CIS Young Architects Contest “Local Utopia in the Global Dystopia” Festival “Zodchestvo 2010”.

Image Courtesy © ITHAKA – Architecture and design

Notting Hill in Kyiv, Ukraine by Yunakov architects

Thursday, February 6th, 2014

Article source: Yunakov architects

Located in the lower part of the Kiev city in Ukraine.

This place was created as a multizone space. As a platform for creative events practically in every sphere: photo studio,  intellectual entertainments , workshops , lectures, concerts , trendsetter’s debates .

Image Courtesy © Oleg Stelmah, Electraua

  • Architects: Yunakov architects
  • Project: Notting Hill
  • Location: Kyiv, Ukraine
  • Photography: Oleg Stelmah, Electraua
  • Software used: Autocad and 3D Max.
  • Design Team: Yunakov Ivan, Kornienko Olga, Karpov Andrey.
  • Area: 170 sqm
  • Year: 2014
GRAPHISOFT: ARCHICAD download 30-day FREE trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy