Archive for the ‘3dS Max’ Category
Friday, November 29th, 2013
Article source: Agraz Arquitectos
This project, named [ N ] House, was designed to enhance a particular local tradition that is about building the living spaces of a house around a patio, this as a consequence of the client’s request: a couple with two young daughters.
The [ N ] House is based on three levels: garage area is located in the basement together with service areas and a game room. The stairway, attached to the central wall, creates a spatial connection between all these different levels of the house, also acting as the meeting point for dwellers right in the moment when they exit the private rooms.
Image Courtesy © Mito Covarrubias
- Architects: Agraz Arquitectos
- Project: N HOUSE
- Location: Zapopan, Jalisco, Mexico
- Photography: Mito Covarrubias
- Date: Assignment 2004. Construction 2005.
- Author: Ricardo Agraz.
- General Contractor: Salvador Aguirre Cordero.
- Collaborators: Oscar Canovas, Beatriz Ramirez Romero, Alberto Tacher, Sara Tamez.
- Woodwork: Esteban Gutierrez Velazco.
- Aluminum: Ventalum.
- Lighting: Sergio Talancon Crail.
- Bathrooms: Ramses Galindo.
- Software used: Autocad, Sketchup, 3dMax
Tuesday, November 26th, 2013
Article source: Margot Krasojevic
Out in the Indian Ocean, protecting the Indonesian coastline from Tsunamis sits the design for an electric artificial reef station. The framework of moveable steel girders and steel reef ball structures is designed in a way to support the growth of natural coral. The design’s section shows the moveable meta balls which are connected to an electrical cable that is attached to floating solar panels on the water surface.
Image Courtesy © Margot Krasojevic
- Architects: Margot Krasojevic
- Project: Electric Coral Reef Station
- Location: Indonesian
- Software Used: 3dsmax, Maya and Microstation
Tuesday, November 26th, 2013
Article source: ITHAKA – Architecture and design
The apartment was designed for a young family with a small child.
The original design of the apartment had a number of serious imperfections. The apartment had a lot of dark rooms and unused spaces. While creating the interior architecture these defects have been possibly removed. As a result the dark hall area became smaller, lost spaces have been reduced.
Image Courtesy © Suren MANVELYAN
- Architects: ITHAKA – Architecture and design
- Project: Apartment Design
- Location: Vardanants, Armenia
- Photography: Suren MANVELYAN
- Architects: Telemak ANANYAN, Gohar ISAKHANYAN
- Area: 160.0 m²
- Project year: 2012
- Implementation: 2013
- Software used: AutoCAD and 3dSMax
Sunday, November 24th, 2013
Article source: Workshop
Muelle Kay is a new seafood restaurant, located in the city of Merida, Yucatan in southeastern Mexico. The word Muelle means dock or pier in Spanish and Kay comes from the Mayan word fish. The goal of this project was to create a space that felt like a homey restaurant along the pier, so we decide to use materials that are commonly seen and accessible in local ports such as crates for exhibiting fish, wooden planks , ropes and sailcloth among others in a re interpretative way, achieving a modern yet casual style.
Image Courtesy © Workshop
- Architects: Workshop
- Project: Muelle Kay Restaurant
- Location: Yucatán, México
- DIMENSION: 220 m2
- YEAR: 2013
- Software used: autocad 2013, 3ds Max 2009
Friday, November 22nd, 2013
Article source: Plan 9 Architecture
Miss Dimanche is a new local woman fashion brand which describe itself “modern and local”. The brand is pretty new and they wants to make design a HQ building from Plan 9 Architecture. The area is located in Corlu which is a town in the north west part of Turkey. The brand owners also wants a showroom for to reachable every time close to HQ’s. Thats why the idea is appear. The building is designed two neighbor and circulated blocks which they are offices and showroom.
Image Courtesy © Plan 9 Architecture
- Architects: Plan 9 Architecture
- Project: Miss Dimanche Headquarters
- Location: Corlu, Turkey
- Software used: Autocad, 3D s Max, Adobe Photoshop
Friday, November 22nd, 2013
Article source: Studio Alfirevic
Solar Atrium House is intended for periodic or permanent use and life in nature. The basic concept is to create a peaceful, safe and intimate retreat. The building is introverted type, with centrally positioned courtyard – atrium, around which all living quarters are arranged.
Image Courtesy © Studio Alfirevic
- Architects: Studio Alfirevic
- Project: Solar Atrium House
- Authors: Djordje Alfirevic & Sanja Simonovic
- Designed: 2013
- Software used: Auto CAD, 3DMax, V-Ray
Thursday, November 21st, 2013
Article source: sanzpont [arquitectura]
AeroShops: Commercial Area inside the Airport.
The recognized Grupo Aeroportuario del Pacifico with a total of 12 airports in Mexico selected the architecture and design firm sanzpont [arquitectura] to carry out the project for the Commercial Area of its new International Terminal at San Jose del Cabo with a total of 7,500 m2.
Image Courtesy © Arq. Victor Sanz Pont
- Architects: sanzpont [arquitectura]
- Project: Commercial Area
- Location: San Jose del Cabo Airport, Mexico
- Photography: Arq. Victor Sanz Pont
- Status: Built.
- Year: 2013.
- Architectural & Design Project: sanzpont [arquitectura], Arq. Victor Sanz Pont, Arq. Sergio Sanz Pont, Arq. Tania Cota, Jose Miguel Cano, Arq. Erika Martinez, Arq. Claudia Kauil Xix, Eder Jafet Hernández, Elizabeth Valencia, Melissa Chávez, DI. Oscar Sanz Pont, Gerard Delgado
- Graphic Design & Branding: LDG. Miguel Angel Mendez + sanzpont [arquitectura]
- MEP Engineering: Edificaciones Arbibe, Ing. Bierge
- Software used: Revit, 3dsmax.
- Commercial Premises Construction & VIP Lounge: Gran Visión, Bernardo Cristerna, Arq. Osvaldo Castrejon
- AeroMarket Construction: JAY Construcciones, Jesús Alatorre Yeomans
- Glass and Aluminium Panels in Commercial Premises & VIP Lounge: Vidriera Calvalum, Martin Armenta
- Glass and Aluminium Panels in Kioskos: Crisal ARTEKPANEL, Javier A. Garcia Martinez
- Carpentry: Diseño de Maderas y Mas, Ing. Edgar Angulo
- Sheet Rock: YETCA, Ing. Mario Martinez
Wednesday, November 20th, 2013
Article source: Maxwan architects + urbanists
Our goal for this project is simply the creation of a timeless park that has great value for centuries to come. This is an informal and dynamic park that can adopt future trends and changes of use. We deny a formal, static, trendy and ’wow!’ oriented park that only relates to current circumstances and stays ‘hip’ for a short while.
Image Courtesy © Maxwan architects + urbanists
- Architects: Maxwan architects + urbanists
- Project: Zaryadye Park
- Location: Moscow, Russia
- Awards: 2nd prize
- Client: Open Joint-Stock Company “Rossiya”
- Promoter: State-owned unitary enterprise “NIiPI for the General Plan of the City ofMoscow”
- Consultant: Strelka Institute for Media, Architecture and Design
- Program: Park, buildings, and underground car parking
- Site area: 14.5 ha
- Total floor area: 10,000m2 (buildings) & 504 car parking
- End of project: 10, 2013
- Design Team: TPO RESERVE (Vladimir Plotkin, RU), Latz+Partner landscape architects (Tilman Latz,DE), MAXWAN architects + urbanists (Hiroki Matsuura, NL)
- Software used: Autodesk Autocad 2012, Autodesk 3DSMax 2012, 2014, Adobe After Effect, Adobe Premire, Photoshop, Illustrator
Consultants & Collaborators:
- Traffic engineer: Buro Happold (Rod Manson, William Hoare,UK)
- Lighting designe: Pfarré Lighting Design (Gerd Pfarré,DE)
- Sociologist, Anthropologist: Natalya Ikonikova (HigherSchoolofEconomics, RU)
- Cost management specialist: Ruperti project (Daria Fitina, RU)
- Park management consultant: Geschäftsführer der Grün Berlin GmbH (Christoph Schmidt,DE)
- Ecologist, Dendrologist: Prof. Dr. Stephan Pauleit, TU Munich (DE)
- Model builder: Rob Gijsbers & Vincent de Rijk (NL)
- Movie production: MAXWAN architects + urbanists
Thursday, November 14th, 2013
Article source: mnté
A high rising tower in the middle of traditional city Vienna in Europe.
It suits shopping, wellness, office and living places. All combined together.
Image Courtesy © Max Monté
- Architects: Max Monté
- Project: Fluent Tower
- Location: Vienna, Europe
- Software used: Cinema 4D, Maya, 3Ds Max
Sunday, November 10th, 2013
Article source: Ark-Kassam Architects
ARK architects proposal project design “Engineers’ Syndicate” for the new architect’s organisation building in Lattakia/Syria.
The design concept is based on different intersections between lines which have been stimulated from the movement of a human carrying a rock as an indication of the labour and toil being a builder, an architect.
Image Courtesy © Ark-Kassam Architects
- Architects: Ark-Kassam Architects
- Project: 136-Engineer Syndicate Office Building
- Location: Latakia, Syria
- Architect: Abdalrahim Kassam
- Client: Engineer Syndicate
- Size: 10000 m2
- Year: 2013-2016
- Software used: Revit, Max.