Open side-bar Menu

Archive for the ‘3dS Max’ Category

Ipês House in são paulo ,sp.brazil by studio mk27

Saturday, July 7th, 2012

Article source: studio mk27

Ten years ago, when StudioMK27 tried to do a project using exposed concrete, many builders said that this was practically impossible. Yeah, Right – Brazil that has a vast modern tradition in the use of raw concrete? During a determinate period, in the 90´s, the use of the material declined sharply, restricted to the few architects that used it experimentally e sporadically, without fixing a constructive know-how.

Image Courtesy reinaldo cóser

  • Architects: studio mk27 - marcio kogan + lair reis
  • Project: Ipês House
  • Location: são paulo . sp . brazil
  • Project Start: january . 2009
  • Completion :  june . 2011
  • Site area: 1041 sqm
  • Built area :  1343 sqm
  • Architect : marcio kogan
  • Software used: AutoCAD, Vectorworks and 3D max

Ceramics of Italy by Sergio Mannino Studio

Tuesday, July 3rd, 2012

Article source: Mannino Studio

The secret garden is one of Italy’s most characteristic places. Enclosed by four walls and protected from the chaos of the town, these gardens were literally private paradises for the use and enjoyment of rich aristocrats or, more often, for monks and nuns.

The booth for Ceramics of Italy is intended to be a little private paradise where people can rest from the chaos of the show and enjoy the best Italian food and coffee.

Ceramics of Italy

  • Design: Sergio Mannino Studio (Sergio Mannino, Francesca Scalettaris)
  • Project: Ceramics of Italy
  • Location: Italy
  • Software used: 3dsMax and Vray


V4 House in Sao Paulo, Brazil by Studio mk27

Tuesday, July 3rd, 2012

Article source: Studio mk27

With each new project contemporary architecture is forced to optimize spaces and use the maximum of each square meter of the site.  V4 House is a rare anti-example.   Its occupation of the land is very far from the maximum coefficient.  Laws allow for much larger constructions. The solution adopted, however, dialogues with the dimension of the site, formulating an adequate relation between the scale of the construction and the site.

Image Courtesy Nelson Kon

  • Architects: Studio mk27
  • Project: V4 House
  • Location: São paulo . sp . Brazil
  • Project Date: April . 2009
  • Completion:  October . 2011
  • Site area: 653,00 sqm
  • Built area: 1.291,00 sqm
  • Software used: AutoCAD, Vectorworks and 3D max (besides other image editing softwares)


Villa Hendrikx in Almere-Haven, The Netherlands by 70F Architecture

Sunday, July 1st, 2012

Article source: 70F Architecture

The commission (September 2007) consisted of a detached house on a plot in residential area Overgooi in Almere, at the foot of the Gooimeer dike. The family wanted, except for transparency and privacy, a strong integration of the plot with the building as opposed to a block on a mound. The house is a two-story building with traditional planning, living on the ground floor and sleeping upstairs. The building is divided into three parts: a two-storey main entrance building facing the front garden, a patio and connecting hallway as an open area in between, and finally the living area in a one-story volume in the middle of the plot.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Villa Hendrikx
  • Location: Ludenbos 9, 1358 EL Almere, The Netherlands
  • Client: the Hendrikx family
  • Project architect: Carina Nilsson
  • Project leader: Bas ten Brinke
  • Engineer: van Rossum Almere
  • Contractor: REKO Uelsen (D)
  • Photographer: Luuk Kramer
  • Completed: September 2009
  • Software used: mix of Autocad/3D studio and Vectorworks


Casa poligonal in Bendinat, Mallorca by Juana Canet Arquitectos

Thursday, June 28th, 2012

Article source: Juana Canet Arquitectos

The site is located in a housing development area in Calvia coast, close to a pine forest overlooking  the sea. The client  wanted to have a house with views among the trees.

The building is fitted in the plot towards the buildable boundary enclosing itself in a half moon shape and focusing all the rooms towards the sea. In order to preserve the existing trees the shape of the building is adapted to their position, so the constructed area is understood as independent pavillions on the one side connected on the other through a common and ample area that allows people to move along.

Casa poligonal

  • Architects: Juana Canet Arquitectos
  • Project: Casa poligonal
  • Location: Housing development in Bendinat, Mallorca
  • Type: Single house with swimmingpool and garage
  • Team: Juana Canet arquitectos
  • Client: Private
  • Contractor: Eix 114 s.l.
  • Surface: 267,27  m2
  • Contract value: 257.824,19 €
  • Data: Under construction 30%
  • Software used: Autocad,3d max, Photoshop, Rhino


Lattice work in Mallorca, Island by Juana Canet and Angel M Martín Cojo

Thursday, June 28th, 2012

Article source: Juana Canet Arquitectos

The plot is located in an urban condition in the centre of Cala Ratjada, in a corner position, close to the sea and to the main square of the village. The program consists in having seven housing state’s dwellings, two premises and seven parking spaces.

The Project is based on achieving a set of goals, on the one hand, to respond with an optimal solution to the question of creating city and on the other one, on improving life conditions and achieve flexibility in social housing:

Image Courtesy Jaime Sicilia

  • Architects: Juana Canet and Angel M Martín Cojo
  • Project: Lattice work
  • Location: Cala Ratjada, Mallorca, Island
  • Type: Seven apartment building of housing state, 2 premises, 7 parking spaces
  • Team: Juana Canet arquitectos + Ángel M MartínCojo.
  • Photography: Jaime Sicilia
  • Developer: IBAVI (Instituto Balear Vivienda)
  • Constractor: Gómez Quintero Construcciones
  • Surface: 1.111 m2
  • Contract value: 707.506,42 €
  • Data: Completed at 90% May 2012
  • Software used: Autocad,3d max, Photoshop, Rhino


Ex Yu Republics Cultural Center in Novi Beograd, Serbia by Filip M. Popovic

Wednesday, June 27th, 2012

Article source: Filip M. Popovic

New Belgrade represents a part of the city built on principles of CIAM agreement, in the spirit of Le Corbuisier. It is also a simbol of old Yugoslavia. On the foundations of never finished Museum of the Revolution of Yugoslav people, a Cultural Center for the former Republics of Yugoslavia has grown.With places for art, music, literature, movies and food, it will host making new ties between people who have been separated by war and politics.

Entrance View

  • Architects: Filip M. Popovic
  • Project: Ex Yu Republics Cultural Center
  • Location: Novi Beograd, Serbia
  • Software used: AutoCad, 3D Studio Max and Adobe Photoshop


Hotel Georgia in Vancouver, Canada by IBI Group

Wednesday, June 27th, 2012

Article source: IBI Group

Standing at 50 storeys and 158 meters, this new residential tower next to the historic Hotel Georgia (recently refurbished) cuts a striking profile in the downtown skyline, and is now the second tallest tower in the city. This new mixed-use tower has hotel and commercial office space in the first 11 storeys, with residential units on the remaining 34 storeys.

Image Courtesy Bob Matheson

  • Architects: IBI Group
  • Project: Hotel Georgia
  • Location: 667 & 669 Howe Street, Vancouver, BC V6J 1C7, Canada
  • Client: Hotel Georgia Redevelopments
  • Architects/Designers: IBI/HB Architects
  • Collaborators: Endall Elliot (Hotel Renovation)
  • Project Manager: Scott Construction
  • Design Team: James Hancock, Hilde Havaerts
  • Software used: Autocad & 3D studio Max for Renderings


Petting farm in Den Uyl Park, Netherlands by 70F architecture

Saturday, June 23rd, 2012

Most city parts of Almere, a city with almost 190.000 inhabitants, have a petting farm. In the ‘den Uyl’ park there used to be one, but it burned down in the early 80’s, leaving only its concrete foundation. Early 2005 we were commissioned by the municipality of Almere to design a new petting farm on the exact location and the remaining foundation. The building was finally built using almost only sponsored money, and finished late 2008.

Image Courtesy luuk kramer

  • Architects:  70F architecture
  • Project:  Petting Farm
  • Location:  Den Uyl Park, Almere, Netherlands
  • Project Area:  126 m2
  • Design:  2005 • Completion: 2008
  • Cost:  € 150,000
  • Client:  Municipality of Almere
  • Program: Petting farm
  • Photo : luuk kramer
  • Software used: mix of Autocad/3D studio and Vectorworks

Sheepstable in Almere, the Netherlands by 70F Architecture

Friday, June 22nd, 2012

Article source: 70F Architecture

The city of Almere has a sheep population of about 80 sheep. The sheep are mobilized to keep the powerful weed “acanthus” or “bears-breech” that grows in the “vroege vogel” – forest and “kromsloot” – park in Almere under control. To centralize and house this population, a sheep stable was needed. The stable is designed with an a-symmetrical homogeneous cross-section. The part of the building where the sheep reside is relatively low; the high part is situated above the (public) pathway and the hay storage section, making it possible to store a maximum amount of hay. This shape also creates a natural flow for the air inside the building, which is refreshed by two slits at the foot of each long side of the building.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Sheepstable
  • Location: Muiderweg 8, 1351 GJ, Almere, the Netherlands
  • Design team: Bas ten Brinke (Project Leader) and Carina Nilsson MScA (Project Architect)
  • Photographer: Luuk Kramer,
  • Commissioner: the City of Almere, the Netherlands, DMO NME, Hans Warrink
  • Contractor: Reimert Bouw- en Infra, Almere, the Netherlands, Ben van Nieuwenhuizen
  • Gross floor area: 400 m2
  • Building costs: €300.000,- ex. VAT.
  • Project start: 2003
  • Project finished: 2007
  • Software used: mix of Autocad/3D studio and Vectorworks


GRAPHISOFT: ARCHICAD download 30-day FREE trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy