Open side-bar Menu
 ArchShowcase

Archive for the ‘3dS Max’ Category

Sheepstable in Almere, the Netherlands by 70F Architecture

Friday, June 22nd, 2012

Article source: 70F Architecture

The city of Almere has a sheep population of about 80 sheep. The sheep are mobilized to keep the powerful weed “acanthus” or “bears-breech” that grows in the “vroege vogel” – forest and “kromsloot” – park in Almere under control. To centralize and house this population, a sheep stable was needed. The stable is designed with an a-symmetrical homogeneous cross-section. The part of the building where the sheep reside is relatively low; the high part is situated above the (public) pathway and the hay storage section, making it possible to store a maximum amount of hay. This shape also creates a natural flow for the air inside the building, which is refreshed by two slits at the foot of each long side of the building.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Sheepstable
  • Location: Muiderweg 8, 1351 GJ, Almere, the Netherlands
  • Design team: Bas ten Brinke (Project Leader) and Carina Nilsson MScA (Project Architect)
  • Photographer: Luuk Kramer, luuk@luukkramer.nl
  • Commissioner: the City of Almere, the Netherlands, DMO NME, Hans Warrink
  • Contractor: Reimert Bouw- en Infra, Almere, the Netherlands, Ben van Nieuwenhuizen
  • Gross floor area: 400 m2
  • Building costs: €300.000,- ex. VAT.
  • Project start: 2003
  • Project finished: 2007
  • Software used: mix of Autocad/3D studio and Vectorworks

(more…)

Villa Frenay in Lelystad, The Netherlands by 70F Architecture

Friday, June 22nd, 2012

Article source: 70F Architecture

The commission (March 2008) consisted of a detached house with outbuildings on a plot in villa park ‘de Noordzoom’ in Lelystad, at the foot of the Enkhuizen – Lelystad dike. The family wanted, like many others, light, air and space.

The house is a one-story bungalow, while the site asked for a response to “living at the water.” The latter is accomplished by making a veranda along the entire length of the building (south), at the most important rooms of the house; from bedroom, to wardrobe, to the master bathroom, to hobby room to the kitchen and finally to the dining- and around the corner the living room. Along this line, there is a transition from water to veranda, to completely glass facade, with doors behind which all mentioned areas are.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Villa Frenay
  • Location: Lommerrijk 18, 8241 AZ Lelystad, The Netherlands
  • Project Architect: Carina Nilsson
  • Project Leader: Bas ten Brinke
  • Engineer: van Rossum Almere
  • Contractor: Ubink Almere
  • Photographer: Luuk Kramer
  • Completed: May 2010
  • Software used: mix of Autocad/3D studio and Vectorworks

(more…)

City Tower in Cheongna, Korea by Gianluca Milesi Architecture

Thursday, June 21st, 2012

Article source: Gianluca Milesi Architecture

In the City Tower competition in Cheongna, Korea, was asked to design an high rise building in a city of future development. Our principal idea for this project has been to concentrate and organize an urban complex node in an unique building and a center of attraction. Our intention has been to formalize this main concept through a consistent architectural structure with a form that respects its consistency in every part, still taking different shapes in order to host the different functions of the project program.

City Tower in Cheongna

  • Architects: Gianluca Milesi Architecture
  • Project: City Tower
  • Location: Cheongna, Korea
  • International Competition Not Due, 2009-2010
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

ANTONY in Paris, France by ARCHI5

Thursday, June 21st, 2012

Article source: ARCHI5

The project’s design and planning focus on a thorough understanding of the local context. The building responds to existing scales. Its location and architecture dentote the space´s public nature and inject new life into the site. By taking surrounding public spaces into consideration when designing the project ,we reinforced the notion that this building is a public facility, a landmark within the surrounding disorder.

Image Courtesy Thomas Jorion

  • Architects: ARCHI5
  • Project: ANTONY
  • Location: Paris, France
  • Photography: Thomas Jorion
  • Software used: Autocad for all the plans. For 3D, Rhino and 3DS and Photoshop for all the renderings.

(more…)

90 Degrees Architecture, City Walls Parasites in Milan, Italy by Gianluca Milesi Architecture

Wednesday, June 20th, 2012

Article source: Gianluca Milesi Architecture

90 Degrees architecture is a research on the urban environment of the city of Milan.

The idea informing this projects is to work on parts of the city uncompleted and never solved, without any urban or architectural quality. Our specific interest is to act on the never finished and never designed blind facades of buildings results of a failed development of the urban fabric and of a lack of design.

Our interest is focused on these “Walls” that, in the best of the circumstances, are spaced dedicated to commercial posters or low quality decorations and just in very few cases solved, usually through the use of green climbing natural patterns.

90 Degrees Architecture

  • Architects: Gianluca Milesi Architecture
  • Project: 90 Degrees Architecture, City Walls Parasites
  • Location: Milan, Italy
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

MOSQUITO in Desio, Italy by Gianluca Milesi Architecture

Wednesday, June 20th, 2012

Article source: Gianluca Milesi Architecture

We propose a contemporary design and architecture for our proposals for the temporary architectures at the Kernel Festival, in the park of Villa Tittoni in Desio.  Our approach is inspired by the shapes, the imagination and the way of thinking of a digital environment and paradigm, through a non standard attitude, parametric geometry and lighting.  This according to the temporary nature of the projects (existing just from the 1st of July to the 3rd of July 2011), a specific attention in the simplicity of the assemblage of the parts, the use of the given construction materials, the photovoltaic panels and the plastic profiles.

MOSQUITO

  • Architects: Gianluca Milesi Architecture
  • Project: Temporary Architecture at Kernel Festival “MOSQUITO”
  • Location: Desio, Milan, Italy
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

SHADOWS in Desio, Italy by Gianluca Milesi Architecture

Wednesday, June 20th, 2012

Article source: Gianluca Milesi Architecture

We propose a contemporary design and architecture for our proposals for the temporary architectures at the Kernel Festival, in the park of Villa Tittoni in Desio.  Our approach is inspired by the shapes, the imagination and the way of thinking of a digital environment and paradigm, through a non standard attitude, parametric geometry and lighting.  This according to the temporary nature of the projects (existing just from the 1st of July to the 3rd of July 2011), a specific attention in the simplicity of the assemblage of the parts, the use of the given construction materials, the photovoltaic panels and the plastic profiles.

SHADOWS

  • Architects: Gianluca Milesi Architecture
  • Project: Temporary Architecture at Kernel Festival “SHADOWS”
  • Location: Desio, Italy
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

Sunscraper: 15.277 solar panels tower in Gianluca Milesi Architecture

Wednesday, June 20th, 2012

Article source: Gianluca Milesi Architecture

We like sustainability, we think is probably on of the most important issue in contemporary architecture.. but we are still architects.. and we like forms and space too… that why we invented the SUNSCRAPER:

This is a project for a tower wrapped by solar panels.  15.277 swinging solar panels have been assembled to create a continuous skin around the building.  The form of our tower wants to be organic and fluid, the perception would be of an architecture quality work and a functioning engine at the same time. We want to re interpret technique adding a formal input to it.  Our effort is to maximize sustainability and energy production creating at the same time a pleasant and contemporary expression of architecture.

15.277 solar panels tower

  • Architects: Gianluca Milesi Architecture
  • Project: Sunscraper: 15.277 solar panels tower
  • Location: somewhere, nowhere, 2009
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

Floating Islands in New York City by Gianluca Milesi Architecture

Tuesday, June 19th, 2012

Article source: Gianluca Milesi Architecture

“DO IT BEFORE NOT AFTER” – floating structures operation – A new way to think at disaster The worlds is becoming more and more sensitive to the climate changing, that, according to the most reputed studies, will have heavy and often dramatic effects on the earth and on us. Recently very well known dramatic events pushed the citizens, the governments and the organizations to think new and more appropriate strategies in order to provide relief to the population’s victims of these catastrophic natural events. This is the aim of this competition too. In medicine there are mostly two ways to try to reduce the impact of diseases on people; one is to cure and the other one is to prevent. We all know that to prevent is better than to cure.

New York Emergency

  • Architects: Gianluca Milesi Architecture
  • Project: Floating Islands – New York Emergency
  • Location:  New York
  • Competition and Conceptual Project, 2010
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

Port and Cruise Service Center International Competition in Kaohsiung, Taiwan by Gianluca Milesi Architecture

Saturday, June 16th, 2012

Article source: Gianluca Milesi Architecture

Architecture as an expression of changing times

Kaohsiung city is a port and, as many other ports is in a situation of changing. The reasons of this changing have been very well analysed by many.. factories that move their production somewhere else. the decreasing of the traffic on the sea.. and many others depending on the particular locations. New York and London already provided, at least partially, to reconvert the unused piers or the part of the city close to the sea or the river previously dedicated to the maritime traffic to other destinations and a different life. The case of Kaohsiung is somehow similar, but there is a difference in the conception of the changing and the strategy related. Many cities just dismissed their piers and their warfs because they were useless and decided to dedicate these part of the city to new and different destinations.

Port and Cruise Service Center

  • Architects: Gianluca Milesi Architecture
  • Project: Port and Cruise Service Center International Competition
  • Location: Kaohsiung, Taiwan
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley: Be Inspired Awards
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy