Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Cycling & Pedestrian track Lotus Flower in Massarosa, Italy by MICROSCAPE architecture urban design AA

Wednesday, October 11th, 2017

 

Article source: MICROSCAPE architecture urban design AA

The area covered by the project is part of the northern basin of the lake Massacciuccoli; until the 40s of the twentieth century the area was occupied by the cultivation of rice, then replaced in the late ’60s by the Lotus’ Flowers – today one of the largest camp in Europe. The site was in a state of decay and neglected and the public use was denied. Today with the new pedestrian and cycling path it brings to the light a true “environmental jewel” that opens a new scenario in an area unfortunately largely deteriorated by urbanization strongly pervasive and of poor quality. The Cycling & pedestrian track “Lotus Flower”, in its length of 1km, connects the train station of Bozzano to the centre of Massarosa and it is an integral part of the system of the regional cycling routes dedicated to Giacomo Puccini and places related to his life.

Image Courtesy © Pietro Savorelli

  • Architects: MICROSCAPE architecture urban design AA
  • Project: Cycling & Pedestrian track Lotus Flower
  • Location: Massarosa, Italy
  • Photography: Pietro Savorelli
  • Software used: Autocad, Primus, Photoshop, Sap 2000, 3D Studio.
  • Client: Municipality of Massarosa
  • Structures and security: Eng. A. Bertini
  • Construction supervision: MICROSCAPE architecture urban design AA
  • Contractor: ATI Bicicchi Felice srl + Cemenbit srl
  • Dimension: 1 Km
  • Amount: 400.000,00 euro

(more…)

Casa Siena in Sitges, Spain by Guillem Carrera

Wednesday, October 11th, 2017

Article source: Guillem Carrera

The site is located in an urban residential low density area surrounded by natural green areas near the sea. A large part of this sector is composed of plots with significant slopes.

The observation of the site and immediate surroundings and distant highlighted that most of the houses that were built or being built in the area followed the same premise: place it in the top of plot – filling the land where the buildings are located, through the widest possible cross-volume, leaving the rest of the site as a garden with difficult use and difficult relationship with the living spaces. Resulting in a disproportionately large number of houses, that are not integrated with the environment.

Image Courtesy © Guillem Carrera

  • Architects: Guillem Carrera
  • Project: Casa Siena
  • Location: Sitges, Spain
  • Software used: Autocad
  • Collaborators: Eva Crespo, Xavier Aguado, Meritxell Anglès, Manel Mata, Edgar Argemí, Xavier Foraste, Lola Tous
  • Constructors: Estructuras Valades Navarro S.L., Construcciones Coma-Farella S.L., Construccions Salvat Jové S.L
  • Builded surface: 487 m2

(more…)

Baranzate Glass Church restoration in Italy by SBG architetti

Monday, October 9th, 2017

Article source: SBG architetti

The aim of this restoration project was to preserve the architectonical complex of the Glass Church of Nostra Signora della Misericordia (Our Lady of Mercy) in Baranzate, retaining the original appearance of the building while updating it and adapting it to today’s requirements and the needs of the local community.

Image Courtesy © Marco Introini Photography

  • Architects: SBG architetti
  • Project: Baranzate Glass Church restoration
  • Location: Baranzate, Italy
  • Photography: Marco Introini Photography
  • Software used: Autodesk, Autocad

(more…)

Brazilian single storey house in Brazil by Aresto Arquitetura

Wednesday, October 4th, 2017

Article source: Aresto Arquitetura

The single storey house of 294 m² is designed for a couple with adult sons who visit their parents frequently.

With an \”L\” shaped plan, the main goals of the project were to make a home accessible, easy to maintain and simple to build.

Image Courtesy © Aresto Arquitetura

  • Architects: Aresto Arquitetura
  • Project: Brazilian single storey house
  • Location: Brazil
  • Software used: SketchUp, Autocad, Revit.

(more…)

Fl2 Apartment in London, England by Archiplanstudio

Friday, September 22nd, 2017

Article source: Archiplanstudio 

The apartment is designed as a dynamic space, which takes different connotations through sliding walls that separate the ritual places of living, such as the kitchen and the bedroomThe space acquires a liquid dimension, where the visual cones overlap and stratifyThe different levels of the floor creates a hierarchy between the living and the sleeping areasThe furnishings are all individually designed and develop the idea of tailored space that avoids the general understanding of iconic design brands, connoting the apartment with a strong character and personality.The project pursues pleasure for details, which is expressed in the accurate design of all the elements that are part of it, from lighting to the flat number on the entrance door.The lamps are all custom made and express a personal research around this piece of furniture which can take on a spiritual and sensual character.The viewer must look closely at the work to discover the intimate details, in order to grasp the subtle and evanescent aspects. Pleasure for details, for dimensions, for the authentic and for the light, is the themes the project has faced.

Image Courtesy © Archiplanstudio

  • Architects: Archiplanstudio
  • Project: FL2 APARTMENT
  • Location: London, England
  • Software used: Autocad

(more…)

Beautiful House in London, England by Nacho Gias Studio with Tomas Gruber

Wednesday, September 20th, 2017

Article source: Nacho Gias Studio with Tomas Gruber 

Ma mama, A qui li rifrega Delacroix?! (But mum, who cares about Delacroix?!)

That was the question thrown by a child to his mum while I was waiting on a huge line for the Louvre Museum, in Paris. It made me smile until I realized that the child’s premise was full of truth, it kept a reality that we forget so often.

Image Courtesy © Nacho Gias Studio with Tomas Gruber 

(more…)

AL DICIOTTO BAR RISTORANTE in Mantova, Italy by Archiplanstudio

Wednesday, September 20th, 2017

Article source: Archiplanstudio 

The project investigates the issues related to the ornament, such attitude can overcome the natural characteristics of the material exceeding the traditional areas. The concrete tables are adorned with imperfect decoration, made with white paint and the lighting in gauze plaster exhibit seams as elements that reinforce the character. The coating of the bench and stools with visible nails, refer to a dimension of the textile material, which seems sewn on the back support.

Image Courtesy © Sonia Zucchelli

  • Architects: Archiplanstudio
  • Project: AL DICIOTTO BAR RISTORANTE
  • Location: Mantova, Italy
  • Photography: Sonia Zucchelli
  • Software used: Autocad

(more…)

Black House in Christchurch, New Zealand by MCAS-Max Capocaccia Architecture Studio

Tuesday, September 19th, 2017

Article source: MCAS-Max Capocaccia Architecture Studio 

The brief required a rectangular floor plan, whilst the creation of partition walls not to celling height and small separations between elements achieved captivating interior spaces that detract from the simple form.

The whole of the North façade and part of the West are glazed so that the entire view is accessible from the living area, dining and kitchen.

Image Courtesy © MCAS-Max Capocaccia Architecture Studio

(more…)

6 Leadwood Loop in South Africa by Metropole Architects

Tuesday, September 19th, 2017

Article source: Metropole Architects 

The architecture of 6 Leadwood Loop was designed in accordance with Feng Shui principles. The square geometry of the floor plan is aligned with the cardinal axis. The shape, position and orientation of all the spaces and bodies of water were guided by Feng Shui protocols.

Image Courtesy © Grant Pitcher

  • Architects: Metropole Architects
  • Project: 6 Leadwood Loop
  • Location: South Africa
  • Photography: Grant Pitcher
  • Software used: Autocad
  • Interior Design: Ann Alderton Bespoke, Feng Shui
  • Consultants: Albert Leroux and Michael Ruthven
  • Main Contractor: Sygnatur
  • Projects Structural Engineers: Young and Satharia
  • Trends Landscape Implementation: Lynch Frog Landscapes

(more…)

Peterhof Lakes Course Golf Club in Saint Petersburg, Russia by Arch group

Monday, September 18th, 2017

Article source: Arch group 

The building where team accommodations, changing rooms and office premises are located, were designed for the Golf Club.

The Golf Club is located at an absolutely unique place, close to Peterhof, just opposite the Mikhailovka  manor house. The Club’s territory is surrounded by astonishing landscapes and monuments of architecture. The Club’s building is not massive, but it incarnates the general idea and the style of the Club to the full. We offered the stylistic direction that emphasises contrast between historic styles of the surrounding and contemporary pseudoclassic architecture of buildings. We were intended to highlight the idea that the Club is totally modern and focused on active people. At the same time it should be in harmony with the surrounding idyllic landscape. Our goal was to create temperate and austere image that was intended to be expressive at the same time.

Image Courtesy © Aleksei Goriainov

  • Architects: Arch group
  • Project: Peterhof Lakes Course Golf Club
  • Location: Saint Petersburg, Russia
  • Photography: Aleksei Goriainov
  • Software used: Autocad, Revit
  • Client: Peterhof Lakes Course Golf Club
  • Team: Mikhail Krymov, Aleksei Goriainov, Irina Cociuc, Elena Utkina, Diana Fish, Kristina Karacharskova
  • Built area: 300 м2
  • Project development: 2014
  • Completion Year: 2017

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon: CW910
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise