Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

LOFT VIVERO in Cholul, México by TACO taller de arquitectura contextual

Tuesday, November 17th, 2015

Article source: TACO taller de arquitectura contextual

Loft Vivero is the result of an architectural intervention of a sixty square meters and more than thirty year old abandoned self-constructed building, located in a plant nursery in Cholul, Yucatán.

Image Courtesy © Leo Espinosa

Image Courtesy © Leo Espinosa

  • Architects: TACO taller de arquitectura contextual / Reyes Ríos + Larraín arquitectos
  • Project: LOFT VIVERO
  • Location: Cholul, México
  • Photography: Leo Espinosa
  • Software used: AUTOCAD and 3DMAX
  • Construction area: 60.00 m2
  • Project Year: 2014
  • Construction Year: 2014
  • Project and construction team: TACO Carlos Patrón Ibarra, Alejandro Patrón Sansor, Ana Patrón Ibarra, Estefanía Rivero Janssen, / RR+L Salvador Reyes Ríos, Josefina Larraín
  • Structural Consultancy: Eng. Alejandro Patrón Sansor

(more…)

Fayetteville Montessori Elementary School in Arkansas by Marlon Blackwell Architect

Tuesday, November 17th, 2015

Article source: Marlon Blackwell Architect

The Montessori Elementary School sits in the small triangular remainder of a site prone to flooding and houses classrooms, a conference room, and a new commercial kitchen.

Image Courtesy © Timothy Hursley

Image Courtesy © Timothy Hursley

  • Architects: Marlon Blackwell Architect
  • Project: Fayetteville Montessori Elementary School
  • Location: Fayetteville, Arkansas, US 
  • Photography: Timothy Hursley
  • Software used: Revit Architecture, AutoCAD, 3ds MAX, Maxwell
  • Team: Meryati Johari Blackwell, Assoc. AIA, NCIDQ, ASID, LEED AP BD+D Bradford Payne, Assoc. AIA, Michael Pope Jonathan Boelkins, AIA Justin Hershberger, Assoc. AIA Stephen Reyenga, Assoc. AIA William Burks, Assoc. AIA
  • Engineer(s):
    • MEP: HP Engineering Inc.
    • Civil: Bates & Associates, Inc.
  • Structural: Myers-Beatty Engineering, PLLC
  • Landscape: Appian Inc.
  • General contractor: Nabholz Construction Corporation
  • Metal Panel: T 10-A Metal Wall Panel

(more…)

Cinema Ideal in LISBON, Portugal by José Neves

Tuesday, November 17th, 2015

Article source: José Neves

Cinema Ideal was the first cinema in Portugal. Located in the heart of Lisbon, between Loreto and Horta Seca streets, it occupies the ground floor of two buildings built in two different epochs – 19th and 20th centuries. Since its inauguration in 1904, the cinema was transformed by multiple interventions, becoming a degraded and architecturally disqualified place, showing exclusively pornographic films during the last three decades.

The entrance of the cinema in 1930 and today, Image Courtesy © Fernando Freire

The entrance of the cinema in 1930 and today, Image Courtesy © Fernando Freire

  • Architects: José Neves
  • Project: Cinema Ideal
  • Location: LISBON, Portugal
  • Photography: Laura Castro Caldas & Paulo Cintra; Fernando Freire
  • Software used: Autodesk AutoCAD
  • Client: MIDAS II, Cinemas
  • Constructor: Contentor de Ideias
  • Colaborators: Rui Sousa Pinto, Vasco Melo, André Matos, Fernando Freire; João Pernão, Maria Capelo (consultores de cor).
  • Engineering: Betar, Natural Works
  • Project year: 2013-2014
  • Construction year: 2014

(more…)

Koningsberger building for Utrecht University in Netherlands by Ector Hoogstad Architecten

Sunday, November 15th, 2015

Article source: Ector Hoogstad Architecten

The new education centre for the faculties of Science, Geosciences and Biomedical Sciences at Utrecht University, designed by Ector Hoogstad Architecten, has opened its doors. This building, named after Victor J. Koningsberger, forms part of an education cluster in the northwest corner of the university campus that will make the university a more attractive place for students, teaching staff and researchers by offering them an inspiring and well-equipped work environment and meeting place. The laboratories, lecture theatres and study landscapes provided within the building are already very well used.

Image Courtesy © Petra Appelhof

Image Courtesy © Petra Appelhof

  • Architects: Ector Hoogstad Architecten
  • Project: Koningsberger building for Utrecht University
  • Location: Boedapestlaan 4, 2584 CD Utrecht, Netherlands
  • Photography: Petra Appelhof
  • Software used: Revit, Autocad
  • Client: Utrecht University
  • Project team: Joost Ector, Max Pape, Lennaert van Capelleveen, Gijs Weijnen, Laurence van Benthem, Ester Bezem, Carlo van Gulik, Hetty Mommersteeg, Ralph Noordhoek, Moritz Prophet, Cornelia Sailer, Sander Timmermans, Elisabeth Tukker, Nejra Vaizovic, Laurens Veth
  • Construction management: Utrecht University
  • Project management: Stevens Van Dijck
  • M&E consultant: Valstar Simonis
  • Structural engineers: Pieters Bouwtechniek (more…)

ONE FAMILY HOUSE IN Cádiz, Spain by alzugaray estudio de arquitectura

Sunday, November 15th, 2015

Article source: alzugaray estudio de arquitectura 

The house is situated on the occidental edge of the natural park of the Estrecho, on an abrupt hillside, where the landscape value, its orientation and complicated topography are determining factors. Instead of viewing these factors as potential limits we considered them to be incentives for a better solution for the project, helping reinforce the intrinsic singularity of the emplacement, to which service is set this construction.

Image Courtesy © Iñaki Bergera

Image Courtesy © Iñaki Bergera

  • Architects: alzugaray estudio de arquitectura 
  • Project: ONE FAMILY HOUSE
  • Location: Zahara de los Atunes, Cádiz, Spain
  • Photography: Iñaki Bergera
  • Software used: Autocad
  • Client: Private
  • Surface built: 640 m2
  • Coordinates: 36º 06’ 11.00’’ N, 5º 49’ 15.75’’ O
  • Project and construction: 2004-2008
  • Constructor: Construcciones Forfa
  • Architects design: Alfonso Alzugaray, Carlos Urzainqui
  • Quantity surveyors: Pedro Legarreta
  • Estructures eng: FS Estructuras SL
  • Civil and installations eng: Iturralde&Sagüés

(more…)

Unilever Aguaí in São Paulo, Brazil by GCP Arquitetos

Saturday, November 14th, 2015

Article source: GCP Arquitetos

The architectural party adopted in the new Unilever Aguaí Site project, meets three important needs, typical of contemporary industrial compounds: flexibility, rationalization and sustainability, becoming a twenty first century industrial site model for Unilever.

Image Courtesy © GCP Arquitetos

Image Courtesy © GCP Arquitetos

  • Architects: GCP Arquitetos
  • Project: Unilever Aguaí
  • Location: : Aguaí, São Paulo, Brazil
  • Software used: AutoCAD and SketchUp
  • Team: Sérgio Coelho (author),  Daniel Mariano (co-author), Nilton Rossi, Gabriela Garcia, Dalmary Rubio, Babara Gasco, Marília Neves e Marysol Brito
  • Project Coordination and Sustainability: Alessandra Araujo
  • LEED Consultant: Cushmamn & Wakefield
  • Site Area: Total: 980,000 sqm2 – Phase 1: 170,000 sqm2
  • Built Area: 24,500 sqm2
  • Year of the design: 2012/13
  • Construction finished: 2015

(more…)

Hill House in Winthrop, Washington by David Coleman Architecture

Saturday, November 14th, 2015

Article source: David Coleman Architecture

This is a modest, sustainable building with a big presence in a big landscape.

The Hill House sits on a long, narrow, rocky ridge line, sloping gently to the south and steeply to the east and west. Site conditions dictated a long, narrow structure, and client expectations suggested a building deeply rooted in the landscape. The resulting project is conceived as a habitable landscape, a place to gather, shelter and rest, closely aligned with the rugged beauty of the site and responsive to the natural conditions.

Image Courtesy © David Coleman Architecture

Image Courtesy © David Coleman Architecture

  • Architects: David Coleman Architecture
  • Project: Hill House
  • Location: Winthrop, Washington, US
  • Software used: AutoCAD
  • Heated Area: 1,100 SF
  • Outdoor Living Area: 1,100 SF

(more…)

Vanke Triple V GALLERY in Tianjin, China by Ministry Of Design

Friday, November 13th, 2015

Article source: Ministry Of Design

SCOPE

Designed as a permanent show gallery & tourist information center for China’s largest developer Vanke, MOD’s dramatic design for the TRIPLE V GALLERY has become an icon along the Dong Jiang Bay coastline in Tianjin China. The client’s program called for 3 main spaces: a tourist information center, a show gallery & a lounge for sales discussion. Requiring their own entrances, the tourist center and the show gallery had to be orientated towards separate existing pedestrian pathways and also operated independently.

Image Courtesy © CI&A Photography - Edward Hendricks

Image Courtesy © CI&A Photography – Edward Hendricks

  • Architects: Ministry Of Design
  • Project: Vanke Triple V GALLERY
  • Location: Tianjin, China
  • Photography: CI&A Photography – Edward Hendricks
  • Software used: Autocad, Photoshop, Sketch up
  • Architectural & Interior Design: Ministry of Design: Colin Seah, David Tan, Daniel Aw, Jeremiah Abueva, Lynn Li, Noel Banta
  • Site Management: Annie Su, He Ting
  • Contractor: Nantong No.2 Construction Group (Archi), Beijing Grain. Rain Architectural Design Co., Ltd. (ID)
  • Land Area: 16,850 sqm
  • Built in GFA: 750 sqm
  • Maximum Height: 11.7m
  • Facilities: Reception, Model display, Open discussion area, Bank service area, Electricity Room, AV Room, Office, Meeting Rooms, VIP Rooms, Cloakroom, Restrooms, Information center
  • Construction duration: 4 months
  • Opening: November 2011

(more…)

VISITOR AND NATURE INTERPRETIVE CENTER in Albacete, Spain by Manuel Fonseca Gallego

Friday, November 13th, 2015

Article source: Manuel Fonseca Gallego

The building is located within the Natural Park of Los Calares del Mundo y la Sima in the area belonging to the municipality of Yeste, which is located in the province of Albacete, Castilla – La Mancha community (Spain).

Image Courtesy © Miguel de Guzmán

Image Courtesy © Miguel de Guzmán

  • Architects: Manuel Fonseca Gallego (Blog)
  • Project: VISITOR AND NATURE INTERPRETIVE CENTER
  • Location: Albacete, Spain
  • Photography: Miguel de Guzmán
  • Software used: Autocad and photoshop
  • Project Execution Team: Architect Jorge Muñoz Ibanez, Manuel Ruiz Machuca Quantity Surveyor,
  • Promoter: Regional Government of Castilla – La Mancha, Ministry of Environment and Rural Development, Provincial Delegation of Albacete, Environmental Management Company of Castilla – La Mancha, SA (Geacam).
  • Foreclosure Address: José Baídez Bertran Architectural Technician
  • Geacam’s Works Ccordination: Sara Picazo Pradillo Architect.
  • Construction: Agrarian Transformation Company SA (Tragsa)
  • Project Date: June 2006
  • Completion Work Date: March 2009

(more…)

Custom Industrial Chic in Montréal, Canada by Les Ensembliers

Friday, November 13th, 2015

Article source: v2com

Les Ensembliers have completed a three-floor, 6,000 square-foot residence that unites three adjoining apartments in the Redpath Lofts. The architects and designers successfully tackled the challenge of rethinking the initial dimensions and purpose of the three distinct units, resulting in a coherent new dwelling that embodies the owners’ personality.

Image Courtesy © André Rider

Image Courtesy © André Rider

  • Architects: Les Ensembliers 
  • Project: Custom Industrial Chic
  • Location: Montréal, Canada
  • Photography: André Rider
  • Software used: Autocad

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon: CW910
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy