Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Pagoda in Nha Trang city, Vietnam by a21studĩo

Wednesday, April 22nd, 2015

Article source: a21studĩo

In 588 BC, Siddhartha attained a fully enlightened being under the Bodhi tree and then taught the Buddhism to people. Many people have renounced the world and followed him. However, after several centuries flourishing, Buddhism has been on its decline. Currently, Buddhism is struggling to adapt to modern society.

Image Courtesy © Quangdam

Image Courtesy © Quangdam

  • Architects: a21studĩo
  • Project: Pagoda
  • Location: Nha Trang city, Vietnam
  • Photography: Quangdam
  • Software used: AutoCAD and sketchup
  • Client: Buddhist/ Phật tử
  • Materials: Stone slab, reinforced steels
  • Project area: 2.3mx3m
  • Building area: 2.3mx3m
  • Completed: 01/2015

(more…)

Cross-Laminated-Timber Cottage in Ladysmith, Quebec by Kariouk Associates

Thursday, April 16th, 2015

Article source: Kariouk Associates

The site for this project is a remote, private lake beside which for more than seventy years existed a family’s cottage.  When the land passed from mother to son, the decision was made to reinvigorate the home; ultimately, because the home had already reached such an advanced state of decay, it was decided to have it removed and to build a new cottage. For sentimental reasons, the new home was to be the exact dimensions of the former and it was to sit in the exact same location.  Aside from those requirements though, a far more open spatial arrangement was desired.  The cottage was only intended for three-season use (the Manhattan couple for whom this was being built intended to spend winters in warmer climates).  The house design was simplified because significant insulation was not required, however, construction intentions were complicated by the fact that the remote location meant that the cost of labor “commuting” from the city would be extremely costly.

Image Courtesy © Photolux Studio/Christian Lalonde

Image Courtesy © Photolux Studio/Christian Lalonde

  • Architects: Kariouk Associates
  • Project: Cross-Laminated-Timber Cottage
  • Location: Ladysmith, Quebec
  • Photography: Photolux Studio/Christian Lalonde
  • Software used:Auto CAD and Photoshop
  • DESIGNER: Paul duBellet Kariouk (Principal), Chris Davis (Senior Design Associate), David King, Sarah McMurtry, Adam Paquette (Design Associates)
  • CLT CONSULTANT: Timmerman Timberworks
  • STRUCTURAL ENGINEER: Moses Structural Engineers

(more…)

House of Shifting Sands in Massachusetts by Ruhl Walker Architects

Saturday, April 11th, 2015

Article source: Ruhl Walker Architects

Sited gently on the lower slope of a dramatic sixty foot high coastal bank and surrounded by miles of undeveloped Cape Cod National Seashore beaches and scrub pines is a warm, modern beach house that is more than just a place to enjoy uninterrupted ocean views and sea breezes. Our clients dreamed of a house that would work equally well as both a year-round family “camp” and also as a “thinking retreat” for collaborating with their colleagues.

Image Courtesy © Ruhl Walker Architects

Image Courtesy © Ruhl Walker Architects

  • Architects: Ruhl Walker Architects
  • Project: House of Shifting Sands
  • Location: Massachusetts, US
  • Software used: Autocad and Sketchup

(more…)

Mystic Lake House in Massachusetts by Ruhl Walker Architects

Saturday, April 11th, 2015

Article source: Ruhl Walker Architects

Our clients found the perfect location for their dream house on the shores of Mystic Lake, facing a heavily wooded park on the opposite shore and only a short drive from Cambridge and Boston. Alas, there was an existing house on the property, and the house was not actually for sale. However, the stars must have been aligned and their passion prevailed after it turned out that the current owner was actually contemplating a move to Washington, DC. With so few affordable undeveloped lots in suburban Boston, many of our clients are turning to “tear-down’s”, especially given that the more affordable houses are typically in such poor condition.

Image Courtesy © Ruhl Walker Architects

Image Courtesy © Ruhl Walker Architects

  • Architects: Ruhl Walker Architects
  • Project: Mystic Lake House
  • Location: Massachusetts, US
  • Software used: Autocad and Sketchup

(more…)

Spring Studios in New York by AA Studio

Saturday, April 11th, 2015

Article source: AA Studio

Spring Studios, a comprehensive creative agency catering to the fashion industry, with headquarters in London, UK. Spring is a group of companies, which work within the fashion, beauty and luxury brand markets and have a shared strategic vision for international growth. Spring was started in 1996 as a photographic studio complex: today, Spring is widely recognized as one of the leading photographic studios in the world and throughout its group of companies is involved in up to 60 fashion shoots a day internationally. Spring has also established a successful business, which provides advertising solutions to leading names including Armani, Louis Vuitton, Chanel, Prada, Vogue, etc.

Image Courtesy © Razummedia

Image Courtesy © Razummedia

  • Architects: AA Studio
  • Project: Spring Studios
  • Location: 50 Varick St, New York, US
  • Photography: Razummedia, DaVinci Stairs
  • Software Used: SketchUp, AutoCad and Rhino
  • Collaboration: MA Architects

(more…)

DAS SWARTZENREADER HAUS in Winchester, Virginia by Reader & Swartz Architects

Friday, April 10th, 2015

Article source: Reader & Swartz Architects

This house was originally built in 1968. It had a 4/12 gable roof, a boxy, conventional floor plan, and a second floor that cantilevered two feet past the first floor. The house sat on the top of a very steep hill, on a small corner lot, within an established neighborhood. Although the house had an amazing view of the Blue Ridge Mountains, there was virtually no way to appreciate it through the minimal number of small windows. The lot dropped 30 feet within its 100-foot depth, helping give the house its great view and vantage point, but also making grading and access difficult. The 8′ ceilings were interrupted by bulkheads, lowering them to 6′-8′ in some rooms.

Image Courtesy © Hoachlander Davis Photography

Image Courtesy © Hoachlander Davis Photography

  • Architects: Reader & Swartz Architects
  • Project: DAS SWARTZENREADER HAUS
  • Location: Winchester, Virginia,US
  • Photography: Hoachlander Davis Photography, Washington, D.C.; Chuck Swartz, AIA, Reader & Swartz Architects, P.C., Kevin Walker, AIA, Reader & Swartz Architects, P.C., Rick Foster Photography Winchester, Virginia
  • Software used: Autocad and SketchUp
  • Structural Engineer: Painter- Lewis, P.L.C., Winchester, Virginia
  • Mechanical Engineer: Comfort Design, Inc., Winchester, Virginia

(more…)

Westport River House in Massachusetts by Ruhl Walker Architects

Friday, April 10th, 2015

Article source: Ruhl Walker Architects

Built on a gentle slope on the Westport River, less than a mile from the coast in southeastern Massachusetts is an unabashedly modern glass house designed for a well known Cambridge general contractor and his wife. Mature oaks and cedars define the property edges and frame dramatic sunset and island views. The architecture expresses the owners’ gregarious way of life, and accommodates their passions for cooking and entertaining their large group of devoted friends.

Image Courtesy © Nat Rea

Image Courtesy © Nat Rea

  • Architects: Ruhl Walker Architects
  • Project: Westport River House
  • Location: Massachusetts, US
  • Photography: Peter Vanderwarker, Nat Rea
  • Software used: Sketchup, Autodesk Autocad
  • Landscape Design: Reed Hilderbrand
  • Interior Design: Diane Cramphin
  • Size: 3000 SFCONDITIONED SPACE
  • Completion:2011

(more…)

Seyfioglu Apartment Building in Istanbul,Turkey by Manco Architects

Thursday, April 9th, 2015

Article source: Manco Architects

4 one bedroom and 16 two bedroom apartments were planned in the project designed for the development of Seyfioglu Apartment Building, which is planned to be reconstructed according to the Urban Regeneration Law.

Image Courtesy © Manco Architects

Image Courtesy © Manco Architects

  • Architects: Manco Architects 
  • Project: Seyfioglu Apartment Building
  • Location: Istanbul,Turkey
  • Software used: AutoCAD, SketchUp, V-Ray and Photoshop
  • Design: Ali Manço, Zuhtu Usta
  • Design Team: Zuhtu Usta, Zeynep Ceren Erdinç
  • Works: Architectural Design
  • Client: Ciner Construction
  • Project Type: Residential
  • Project Status: Ongoing
  • Area: 4.182,6m²

(more…)

Vertical itaim building in são paulo, brazil by Studio MK27 | Marcio Kogan

Thursday, April 9th, 2015

Article source: Studio MK27 | Marcio Kogan

V_Itaim is a small building with 10 apartments in São Paulo designed by studio mk27. Its simplicity and the search for generous spaces in a careful composition of material oriented the architectural project.

The façade of the building is done in exposed reinforced concrete and wooden panels, conceived to shade the inner environments and which the residents can move according to their desires. In this way, the users can optimize their comfort depending on their use and the incidence of the sun.

Image Courtesy © Pedro vannucchi

Image Courtesy © Pedro vannucchi

  • Architects: Studio MK27 | Marcio Kogan
  • Project: Vertical itaim building
  • Location: São paulo, brazil
  • Photography: Pedro vannucchi
  • Software used: AutoCAD
  • Project Date: february . 2011
  • Completion: september . 2014
  • Site area: 620 sqm
  • Built area: 3.045 sqm
  • Apartment type: 144 sqm (living area)

(more…)

OVO in Fideris, Switzerland by Camilo Rebelo

Thursday, April 9th, 2015

Article source: Camilo Rebelo

EGG project was an order from a client full of restlessness – OJ.
OJ acquired a sculpture, called ‘Seed’, of the contemporary Portuguese artist Rui Chafes. The piece built in iron finds its purpose in the universality of OJ’s mind that seeks values such as origin, purity and universal mystery.

In a second stage, OJ threw us the challenge to design and build a space to receive and expose the ‘Seed’, promoting a deep reflection between Art and Architecture. The designed space is in the basement of his home in Fideris, located in the Swiss Alps.

Image Courtesy © Patricio Guedes

Image Courtesy © Patricio Guedes

  • Architects: Camilo Rebelo
  • Project: OVO
  • Location: Fideris, Switzerland
  • Photography: Patricio Guedes
  • Software used: AutoCAD, Solidworks
  • Client: O. J.
  • Collaborators: Patricio Guedes
  • Project partner – sculptor: Rui Chafes
  • Engineering coordination: GOP – Gabinete de Organização e Projectos Lda. (more…)
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:YII2017 Register Now
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy