Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

House of Alain Hubert in Rhode-St-Genèse, Belgium by Philippe Samyn and Partners

Thursday, August 24th, 2017

Article source: Philippe Samyn and Partners

The Avenue Bel Horizon, typical of a number of residential districts located in the surroundings of Brussels, is bordered by houses, some isolated, some in small groups, arranged in narrow and deep plots. The one that interests us is no exception to the rule: 20 m wide along the road (to the North) and 73 m deep, with a building area limited to 11 m in width and 15 m in depth, 6 m away from the road.

Image Courtesy © Quentin OLBRECHTS

  • Architects: Philippe Samyn and Partners
  • Project: House of Alain Hubert
  • Location: Belgium, Avenue Bel Horizon, Commune of Rhode-Saint-Genèse
  • Software used: Autocad
  • Photography: M-F. Plissart, Quentin OLBRECHTS
  • Client: Alain Hubert
  • Design Partner: Philippe Samyn
  • Administrative Partners: Ghislain André and Jacques Ceyssens
  • Associates: Karim AMMOR, Ambroise CREVECOEUR
  • Building Services: Philippe SAMYN and PARTNERS sprl, architects & engineers
  • Costs: 450 000 €
  • Gross Floor Area: 300 sqm
  • Completion: July 2014

(more…)

Riverside Villa in Kyoto, Japan by Atelier Boronski

Wednesday, August 23rd, 2017

Article source: Atelier Boronski

On a typically small site wedged between the road and the river this house in Kyoto is a kind of European canal-house in Japan. It is close to the city center but in a quiet street near cafes and restaurants, bakeries and a chocolatier. The museum district (with temples and shrines) is a short walk, and there are many cherry trees lining nearby streets.

Image Courtesy © atelier-boronski

  • Architects: Atelier Boronski
  • Project: Riverside Villa
  • Location: Kyoto, Japan
  • Software used: SketchUp, Autocad
  • Engineer: Jun Yanagimuro Structural Engineering
  • Main Contractor: Takahashi Komuten
  • Landscaping: Teiyu (Tomoatsu Sano)
  • Main Materials: Steel frame, concrete floors, lightweight hollow-core cement panel siding, galvanized steel-work.  Fire-proof timber siding, double glazing.  Double-layer plaster-board, paint finish.
  • Total Built Area: 230m2 (incl. Roof Garden)
  • Construction period: Eight months

(more…)

Fire Station Houten in The Netherlands by Philippe SAMYN and PARTNERS

Wednesday, August 16th, 2017

Article source: Samyn and Partners

The municipal authority in Houten (Netherlands) commisssioned the Samyn and Partners practice to build a small fire station on a site surrounded by lots of green space. The municipality of Houten has a hybrid fire fighting force : four professional firefighters, and around sixty volunteers. The building agenda set a requirement that there should be space to accommodate six fire engines.

Image Courtesy © Christian RICHTERS

  • Architects: Philippe SAMYN and PARTNERS (Ph. Samyn, N. Neuckermans, J. Ceyssens, R. Houben, B. Calcagno)
  • Project: Fire Station Houten
  • Location: Veerwagenweg (De Brug 2) 3991 LN – Houten, Netherlands
  • Photography: Christian RICHTERS
  • Software used: Autocad
  • Client: GEMEENTE HOUTEN
  • Project Manager: DHV AIB bv
  • Structural engineering: SAMYN and PARTNERS and SETESCO s.a, de Bondt Rijssen BV(execution)
  • Mechanical and electrical engineering: DHV AIB bv
  • Energy and environmental  engineering: ECOFYS
  • Main Contractor: NIJHUIS UTRECHT
  • Contractor services: INSTALLATIEBEDRIJF ANDRIESSEN

(more…)

Casa di Luce in Dallas, Texas by Morrison Dilworth + Walls

Wednesday, August 16th, 2017

Article source: Morrison Dilworth + Walls

Casa di Luce is a single-family house located in the Turtle Creek section of Dallas and comprises 3,226 air-conditioned square feet on two levels. The house is constructed on an irregularly-shaped, 8,075 square foot site with significant topography.

The size and shape of the site, as well as the presence of grand oak tree, presented challenges that greatly influenced the design of the house and its surroundings.

Image Courtesy © Morrison Dilworth + Walls

  • Architects: Morrison Dilworth + Walls
  • Project: Casa di Luce
  • Location: Dallas, Texas, USA
  • Software used: AutoCAD, SketchUp

(more…)

Ilôt Poste Weiss, ZAC Châteaucreux à ST-ETIENNE in France by ecdm Architectes

Sunday, August 13th, 2017

Article source: ecdm Architectes

Contribute to a new polarity in the landscape 

Located across from the St. Etienne station on the Esplanade de France, the influence of the intervention at the heart of the BIA Châteaucreux is a link between neighborhoods and horizon lines, a low point in the topography of St. Etienne in front of a preferred route to the city center. Combined with the scale of the project and the symbolic value of the program, This unique location gives the project a special status in the construction of the city. The project subscribes to the contemporary idea of the construction of the city that leads to the creation of rhythms, of multipurpose spaces contributing to the realization of a less linear environment, able to evolve and mutate. The goal is to embed the large commercial component of the neighbourhood in a more complex urban dynamic, made of interlocking assemblies essential to any large and vibrant city. Thus, the project offers an open floor plan, initiating continuity and affiliations, creating links between polarity and panoramas, hills and plains, lower and upper town.

Image Courtesy © ecdm Architectes

  • Architects: ecdm Architectes
  • Project: Ilôt Poste Weiss, ZAC Châteaucreux à ST-ETIENNE
  • Location: ST-ETIENNE, France
  • Software used: Autocad, SketchUp, Rhino, Adobe CS

(more…)

The Itupeva House in Brazil, by Aresto Arquitetura

Sunday, August 13th, 2017

Article source: Aresto Arquitetura

The house is basically organized in a large block in format with two floors.

The social sector was positioned on the lower floor, which features the living room, dining room, kitchen, home theater, utility room, guest toilet, laundry room, gourmet space and pool. On the ground floor are the garage, the warehouse, the entrance hall, the office and the three dormitories.
The local conditions were decisive for the solutions adopted in the project. The lot is located in the highest part of the condominium, which allowed the creation of large openings overlooking the natural landscape.

This privileged location also allowed a better use of ventilation and natural lighting. The large openings in opposite directions allow the control of the air currents inside the house.

Image Courtesy © Danillo Mazzani

  • Architects: Aresto Arquitetura (Danillo Mazzani)
  • Project: The Itupeva House
  • Location: Brazil
  • Software used: Autocad, SketchUp, Revit

(more…)

Waltham Jewel in Victoria, Australia by Melbourne Design Studio (MDS)

Friday, August 11th, 2017

Article source: Melbourne Design Studio (MDS)

Melbourne Design Studios (MDS) are terrifically adaptable. Given a brief for contemporary new residences for a development, the team also took on the dilapidated heritage home on the allotment, transforming it into ‘Waltham Jewel’, one of Richmond’s finest homes.

Image Courtesy © Peter Clarke Photography

  • Architects: Melbourne Design Studio (MDS)
  • Project: Waltham Jewel
  • Location: Richmond, Victoria, Australia
  • Photography: Peter Clarke Photography
  • Software used: Vectorworks, BIM
  • Project Team: MDS: Marc Bernstein-Hussmann, Felicity Bernstein, Paola Provinciali
  • Builder: H Daniel Constructions
  • Building Surveyor: Metro Building Surveying
  • ESD Consultant: Melbourne Design Studios (MDS)
  • Structural Engineer: Hive Engineering
  • Services Engineer: NJM
  • Completion Date: April 2016

(more…)

Liberty Lounge in Seoul, Korea by Simplex Architecture

Sunday, August 6th, 2017

Article source: Simplex Architecture

The site is located in an alley, a few blocks away from Dosandae-ro – a busy boulevard in Seoul’s Gangnam district. The area used to be a low-rise residential district in the past, but now rapidly transforming into a commercial district full of shops and restaurants. The existing building had a simple rectangular structure with a courtyard in the middle, using concrete blocks and blackened steel as a major finish material. The main interest in designing the building was to keep the existing materiality, yet to make enough alteration to accommodate the new program. The concrete block wall on the north was maintained in order to preserve the original materiality of the building, and the blackened steel was mainly used for the newly built walls.

Image Courtesy © Kyungsub Shin

  • Architects: Simplex Architecture
  • Project: Liberty Lounge
  • Location: 653-4, Shinsa-dong, Gangnam-gu, Seoul, Korea
  • Photography: Kyungsub Shin and Young Kim
  • Software used: RhinoAutoCad
  • Design Principals: Greg Chung Whan Park and  Sanghun Song
  • Visualization/ 3D: VIZE
  • Space Branding & Design: KMGD
  • Landscape Architect: Studio 101
  • Structural Engineer: Tomi Structure

(more…)

Impact Hub in Santa Barbara in California by Anacapa Architecture

Wednesday, August 2nd, 2017

Article source: Anacapa Architecture

We designed a dynamic, shared work environment located on Santa Barbara’s famous State Street, right in the heart of the entrepreneurial and non-profit community. We transformed a traditional, mission style building into an innovative, collaborative, impactful space for Santa Barbara’s insatiable start-up culture.

Image Courtesy © Anacapa Architecture

  • Architects: Anacapa Architecture
  • Project: Impact Hub
  • Location: Santa Barbara, California, USA
  • Software used: Autocad, Revit

(more…)

Outpost in Idaho by Olson Kundig

Wednesday, August 2nd, 2017

Article source: Olson Kundig 

Set in the remote, harsh high desert of Idaho, Outpost is an artist’s live/work studio and sculpture garden. The building’s compactness restricts site impact and reinforces the desire to be outside. This is a windy place, and the enclosed “paradise garden,” is separated from the wild landscape by thick masonry walls. The footprint of the house is the limit of intrusion into the land—a simple, clearly defined space. This structure exemplifies Kundig’s belief that the architect’s job is to create an experience of place.

Image Courtesy © Olson Kundig

  • Architects: Olson Kundig
  • Project: Outpost
  • Location: Idaho, USA
  • Software used: Autocad

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise