Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

JADE Apartments in Sydney’s CBD by Tony Owen Partners

Saturday, January 18th, 2014

Article source: Tony Owen Partners

The Jade apartment tower by Tony Owen partners has just been completed in the centre of Sydney’s CBD. The 15-storey tower consists of 27 one, two and three-bedroom apartments, plus double-level penthouses with a vaulted glass ceilings.

Image Courtesy © Tony Owen Partners

  • Architects: Tony Owen Partners
  • Project: JADE Apartments
  • Location: Sydney’s CBD
  • Software used: Autocad, Revit, Rhino, Maya and 3DS

Ananda Building in Fuenlabrada, Madrid by Espegel – Fisac Arquitectos

Saturday, January 18th, 2014

Article source: Espegel – Fisac Arquitectos

The program specified by the owner-developer, was the construction of a block of flats with basement, garage, storage rooms and facilities rooms. We propose a very compact volume of 18 dwellings with a standard program: 12 three-bedroom dwellings and 6 four–bedrooms dwellings, with the aim of achieving the maximum efficiency in the use of the floor area.

Image Courtesy © Angel Baltanás

  • Architects: Espegel – Fisac Arquitectos (Carmen Espegel & Concha Fisac)
  • Project: Ananda Building
  • Location: Fuenlabrada, Madrid
  • Photography: Angel Baltanás
  • Software used:AUTOCAD.
  • Completion time: Febuary 2012 
  • Designer: Carmen Espegel Alonso, Concha Fisac de Ron
  • Client: Zosma, S.A.
  • Total Area: 7.286,40 sqm
  • Consultants: Ana Espegel Alon, Mecanismo

Residence 1414 Renovation in Austin, Texas by Miró Rivera Architects

Thursday, January 16th, 2014

Article source: Miró Rivera Architects

This project consisted of a complete renovation of a house located in a historic neighborhood. The original 1940’s house suffered an unfortunate addition in the 1980’s. The main goals of the project were to restore the house of the 40’s vocabulary on the exterior while transforming the interiors to bring more light and provide a better connection with a fantastic backyard. A simple material palette was used to maintain a balance between the traditional aspects of the original house and the modern updates.

Image Courtesy © Miró Rivera Architects

  • Architects: Miró Rivera Architects
  • Project: Residence 1414 Renovation
  • Location: Austin, Texas
  • Software used: AutoCAD
  • General Contractor: Dalgleish Construction
  • Structural Engineer: Jerry Garcia
  • Landscape & Pool: Root Design
  • Specialty Wood & Metal Work: Jim Thomas Studios
  • Custom Furniture: Mark Macek

BZL Boarding School by Herbertarchitekten

Friday, January 10th, 2014

Article source: Herbertarchitekten  

herbertarchitekten are currently planning a boarding school for the Bildungs- und Technologiezentrum für Elektro- und Informationstechnik e.V. in Lauterbach, Germany . The new building replaces an existing building.

A previously conducted feasibility study brought the result that the reconstruction and modernization of the existing building is not economical.

Image Courtesy © Herbertarchitekten

  • Architects: Herbertarchitekten
  • Project: BZL Boarding School
  • Software used: Autocad 2004.

Banker Wire Woven Wire Mesh Entertains In Studio City, Los Angeles, California

Friday, January 10th, 2014

Article source: Banker Wire

The Studio City neighborhood of Los Angeles was established along with the prominent movie studios during the early 20thcentury. In one of its high-end apartment complexes, a new water feature created with Banker Wire mesh, emphasizes the connection between Studio City and the movie industry – and provides a canvas for multimedia entertainment.

Image Courtesy © ARTBOX construction Inc.

  • Project: Banker Wire Woven Wire Mesh Entertains In Studio City
  • Location: Los Angeles, California
  • Photography: ARTBOX construction Inc.
  • Software used: CAD 3D.

DIGITAL MUSEUM in Pecica, Arad County, Romania by Claudiu IONESCU

Thursday, January 9th, 2014

Article source: Claudiu IONESCU

“Inspired by Constantin BRANCUSI’s „Miracle” sculpture, the building rises naturally from the ground through golden spirals (the Fibonacci spirals) and crystallizes in a shape that, just like its muse, tries to set itself free from „the past burdens”, striving to rise high. Its shape offers the visitor a feeling of aspiration, an aspiration not only of the building, but of life itself.” – Claudiu IONESCU – architect

Image Courtesy © Bogdan IORGOVAN

  • Architects: Claudiu IONESCU
  • Project: DIGITAL MUSEUM
  • Location: Pecica, Arad County, Romani
  • Photography: Bogdan IORGOVAN
  • Design Team: Claudiu IONESCU, Dragos MILOTIN, Gabriel TAKACS, Calin SEBARCHIEVICI
  • Constructor: S.C. START S.R.L.
  • Area: 125.75 mp
  • Year: 2013
  • Software used: Rhinoceros 5.0, Grasshopper, Autocad, Photoshop and Dialux.

CASA VEINTIUNO in GUADALAJARA, MEXICO by HERNÁNDEZ SILVA ARQUITECTOS

Thursday, January 9th, 2014

Article source: HERNÁNDEZ SILVA ARQUITECTOS

The house is located in a conventional land inside a gated community, west of Guadalajara’s metropolitan area. Is has a north orientation towards the street and south on the back, leaving a free area on the side facing west.

The project begins at the idea of making a house with the minimum ofwalls to feel it completely transparent and openfrom the entry. We decided to make a big hole inside that takes back the old spanish patio, being the protagonist of the residence.

Image Courtesy © CARLOS DÍAZ CORONA

  • Architects: HERNÁNDEZ SILVA ARQUITECTOS
  • Project: CASA VEINTIUNO
  • Location: GUADALAJARA, MEXICO
  • Photography: CARLOS DÍAZ CORONA
  • PROJECT YEAR: 2009
  • CONSTRUCTION YEAR: 2010-2012
  • TEAM: ARQ. ALEJANDRO APONTE GÓMEZ, ARQ. ROBERTO PEÑA RODRÍGUEZ
  • AREA: 541 M2
  • Software used: Sketchup, Autocad and 3DS max.

Gazebo House in Guayllabamba, Quito Canton, Ecuador by AR+C

Tuesday, January 7th, 2014

Article source: AR+C 

This is a 140 m2 single-family residential Project located in Guayllabamba, Ecuador. The house was conceptualized as a continuation of nature which is why it is embedded in the mountain. This green platform allowed the preservation of a pre-construction view point an dispart of the house features. A perimeterretention wall surrounds the primary structure. Anairchambergivesthermalcomfortinsideandprotectsthehousefromhumidity.

Image Courtesy © Lorena Darquea

  • Architects: AR+C
  • Project: Gazebo House
  • Location: Guayllabamba, Quito Canton
  • Photography: Lorena Darquea
  • Architect In Charge: Francisco Almeida, Tatiana Bohorquez
  • Area: 160 sqm
  • Year: 2013
  • Software used: Autocad, Archicad and Maxwel Studio Renders.

Stacey-Turley Residence in Ottawa, Canada by Kariouk Associates

Tuesday, January 7th, 2014

Article source: Kariouk Associates

The requirements for this project called for the design of a small home that would respond to the evolving life needs of a young couple, with two small boys, who intend to live their lives here for the next half century.  A significant spatial challenge from the start of the project was that the maximum allowable width of the house could only be twenty-four feet, hence the house would necessarily need to be long; because windows on the long sides of the home were greatly restricted by zoning regulations, there was an immediate design challenge to bring light into the long interior volume that otherwise would be dark.

Image Courtesy © Photolux Studios, Christian Lalonde

  • Architects: Kariouk Associates
  • Project: Stacey-Turley Residence
  • Location: Ottawa, Canada
  • Photography: Photolux Studios, Christian Lalonde
  • Designer: Paul duBellet Kariouk (Principal), Chris Davis (Senior Design Associate), David King (Design Associate), Sarah McMurtry (Design Associate), Dimitar Mehandjiev (Design Associate), Adam Paquette (Design Associate)
  • General Contractor: R.K. Porter General Contracting Inc.
  • Engineering: ART Engineering
  • Accordion Windows: Monarch Moveable Glass Walls
  • Millwork: Karhu Fine Cabinetry & Millwork
  • Year: 2011-2013
  • Task: To design a “forever” home on a narrow lot for a young family
  • Software used: AutoCad and Photoshop

BUSTAMENTE HOUSE in Valparaíso Region, Chile by PAR Arquitectos

Saturday, January 4th, 2014

Article source: PAR Arquitectos

The commission was to develop a house under the standards of the real estate business, a basic and optimized program complemented to a strategy of exterior terraces and main rooms open to panoramic views.

Considering the terraced, square site with an average slope, with “moments” with an ocean view, we decided to set back the house to the back of the site, constituting a broad and long facade, taking the highest point of the site and a more panoramic view of the environment.

Image Courtesy © Diego Elgueta

  • Architects: PAR Arquitectos (Pablo Lopez, Alvaro Cortés, Rafael Grez)
  • Project: BUSTAMENTE HOUSE
  • Location: Valparaíso Region, Chile
  • Photography: Diego Elgueta
  • Project Area: 1,510 sqm
  • Project Year: 2013
  • Construction: PAR Arquitectos
  • Structures: Ingevsa, José Manuel Morales
  • Landscape: María José Rojas
  • Software used: Autocad 2010 and Sketchup last version
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:Microstation License
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy