Open side-bar Menu
 ArchShowcase

Archive for the ‘Autocad’ Category

Colegio Villa El Sol in El Bosque, Chile by GUBBINS ARQUITECTOS

Friday, September 27th, 2013

Article source: GUBBINS ARQUITECTOS

The project is located on a site with a special feature; it is 25 meters wide and 100 meters deep, which allows us to develop a 4-storey building occupying almost the entire ground surface. This gives the project a protagonist scale in the neighborhood.

The strategy to not “keep” the dimensions of the property (pre-existing length and width), was to organize the program of the school within a large regular volume, based on a double bay corridor, alternating classrooms and playgrounds in different levels and on both sides of the central circulation. This allowed us to open cross perspectives on the site, with views of the mountains and the sunset.

Image Courtesy © GUBBINS ARQUITECTOS

  • Architects: GUBBINS ARQUITECTOS
  • Project: Colegio Villa El Sol
  • Location: Santiago Metropolitan Region, Chile
  • Photography: Gubbins Arquitectos
  • Owner: Sociedad Educacional Colegio Villa el Sol S.A
  • Project Area: 3281.0 m2
  • Project Year: 2009
  • Collaborators: Arq. Bruno Giliberto, Arq. Nicolas Fones, Arq. Beatriz Marin
  • Site Area: 2925 m2
  • Materials: Masonry, concrete, glass
  • Software used: Autocad, Sketchup and Photoshop

Doublehouse in Danderyd, Sweden by Tham & Videgård Arkitekter

Friday, September 27th, 2013

Article source: Tham & Videgård Arkitekter

A house organized as a spiralling sequence of four large rooms in four levels. These big spaces without a fixed hierarchy let this house invite the inhabitants to organise their lives following their own preferences.

Image Courtesy © Tham & Videgård Arkitekter

  • Architects: Tham & Videgård Arkitekter
  • Project: Doublehouse
  • Location: Danderyd, Sweden
  • Chief architects: Bolle Tham and Martin Videgård
  • Collaborator: Henrik Lundén
  • Client: Private
  • Year of design: 2004
  • Year completed: 2005
  • Square meters: 360 sqm + roof terrace.
  • Size of building lot: 1006 sqm
  • Time to build: 12 months
  • Type of construction: In situ cast concrete
  • Software used: Autocad

CONTEMPORARY INTERPRETATION OF A TRADITIONAL ZAGORJE COTTAGE in Kumrovec, Croatia by PROARH

Wednesday, September 25th, 2013

Article source: PROARH

The pre-existing traditional Zagorje cottage is situated on the green slopes near Kumrovec  and was structurally and statically in poor condition. It was renovated taking into consideration the characteristics of local heritage and design. The pre-existing house form is kept, while the porch is substituted with a glass cube.

Image Courtesy © Damir Fabijanić

  • Architects: PROARH
  • Project: CONTEMPORARY INTERPRETATION OF A TRADITIONAL ZAGORJE COTTAGE
  • Location: Kumrovec, Croatia
  • Photography: Damir Fabijanić
  • Author: Davor Mateković
  • Site area: 3865 m2
  • Built up area: 230 m2
  • Net area: 163m2
  • Project year: 2011
  • Completed: year: 2012
  • Software used: AUTOCAD

HEADQUARTERS STORE in WROCŁAW, Poland by BudCud

Tuesday, September 24th, 2013

Article source: BudCud

Street-wear store is located on the ground floor of a historic tenement house in the city centre of Wroclaw (PL). Shape of an existing volume became a major inspiration and an impulse to design Headquarters Store as an abstract landscape. Arches and gates from steel pipes, filled with glass panels, reinterpret contours of existing barrel vaults and deform standard clothes hanger. Contour objects – together with simple white furniture from medium-density fiberboard – create additional subspaces inside a boutique.

Image Courtesy © JAROSŁAW CEBORSKI

  • Architects: BudCud
  • Project: HEADQUARTERS STORE
  • Location: WROCŁAW, Poland
  • Photography: JAROSŁAW CEBORSKI
  • DESIGN: 2013
  • CONSTRUCTION: 2013
  • CLIENT: ASPA
  • PROGRAM: BOUTIQUE, OFFICE
  • AREA: 90.5 m2
  • STATUS: COMPLETED
  • TEAM BUDCUD: MATEUSZ ADAMCZYK, AGATA WOŹNICZKA
  • Software used: AutoCAD, Rhinoceros, Adobe Photoshop and Adobe Illustrator

Chesapeake Building 12 in Oklahoma by Elliott + Associates Architects

Tuesday, September 24th, 2013

Article source: Elliott + Associates Architects

This building is located next to a creek that bisects the campus. This building is curved and all glass to differentiate it from the brick office buildings and to make clear that this is a public building like the other two all glass buildings on campus (the Conservatory Restaurant and the Fitness Center Addition).

Image Courtesy © Elliott + Associates Architects

Program Requirements: 

  • Add a second auditorium on campus that seats 232.
  • Add a third on campus restaurant that seats 138 inside and 48 outside.
  • Provide a banquet room for special events which seats 144.
  • Provide a boardroom for quarterly board meetings.
  • Provide private dining rooms that seat 8-12 people for lunch meetings.
  • Provide a 2,843 square foot catering kitchen to provide food for meetings all over campus.

Villa K by ARCHITECTENCSK

Tuesday, September 24th, 2013

Article source: ARCHITECTENCSK

Modern Villa floot on top of old dune.

Ground level three bedrooms with bathroom, office with seperate entrance, service block, ktichen, diningroom and livingroom with two fire places.

Basement technical room and garage, multi purpose room(archive, cinema etc.) , guest area.

Image Courtesy © ARCHITECTENCSK

My Home Studio in Querétaro, Mexican by 4th-Studio

Saturday, September 21st, 2013

Article source: 4th-Studio

My Home Studio is the project that Bticino has created in Mexico to show in a clear and exciting way the “Home automation” concept. The most innovative and cut edge domotic functions altogether in a single place ready to be incorporated in our daily lives and this way dwell and work in spaces with more comfort, security and efficiency. My Home Studio is probably the most complete and sophisticated showroom in our country.

Image Courtesy © 4th-Studio

  • Architects: 4th-Studio
  • Project: My Home Studio
  • Location: Querétaro, Mexican
  • Photography: 4th-Studio
  • Client: Bticino de Mexico
  • Year: 2013
  • Software used:  Autocad and 3D Studio Max

Box 2: designLSM at the Restaurant & Bar Design Awards in London, UK

Saturday, September 21st, 2013

Article source: designLSM

designLSM at the Restaurant and Bar Design Awards 2013

designLSM’s design for The Roxy has won the best designed bar in London award at the 2013 Restaurant & Bar Design Awards.

Image Courtesy © James French

  • Architects: designLSM
  • Project: Box 2: designLSM at the Restaurant & Bar Design Awards
  • Location: London, UK
  • Photography: James French, The Roxy
  • Software used: AutoCAD

THE COLLECTION by Bureau A

Friday, September 20th, 2013

Article source: Bureau A

“Everything remembered, everything thought, all awareness becomes base, frame, pedestal, lock and key of his ownership. Period, region, craft, previous owners – all, for the true collector, merge in each one of his possessions into a magical encyclopaedia whose quintessence is the fate of his object.”

Walter Benjamin, The Arcades Project

Image Courtesy © Dylan Perrenoud

  • Architects: Bureau A
  • Project: THE COLLECTION
  • Photography: Dylan Perrenoud
  • Software used: AutoCad and Rhino

House in Pedrogão, Torres Novas, Portugal by Paulo Henrique Durão

Friday, September 20th, 2013

Article source: Paulo Henrique Durão

BELOW GROUND, ABOVE AIR

I take Saramago once again: “My relation with time is, above all, very specific….when trying to express it graphically; I understand time as a large screen, a huge screen, where every single event is projected, including the oldest and the most recent. On that screen, everything is side by side in a kind of chaos as if time was compressed and flattened on that surface; as if events, facts and people were shown and assembled chaotically instead of being diachronically assembled, and we were meant to find a meaning.” (1)

Image Courtesy © Montserrat Zamorano Gañán

  • Architects: Paulo Henrique Durão
  • Project: House in Pedrogão
  • Location: Pedrogão, Torres Novas, Portugal
  • Photography: Montserrat Zamorano Gañán
  • CLIENTS: Private
  • STATUS: Built
  • PROJECT: 2003
  • CONSTRUCTION: 2006 . 2008
  • COST: Confidential
  • COLLABORATION: Daniel Gil Tomé, Nelson Mercê
  • AREA: 285m2

SPECIALISTS

  • Model: AlexandreCalado
  • Structure: Eng Pedro Viegas
  • Constructor: António José Santos Cons.
  • Mechanics: Rui Regnaud
  • Software used: AutoCAD
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy